SW-MOTECH Frame Slider Kit For Yamaha FJR1300 ’06-’19
STP.06.590.10301.B
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
Included:
- 2 frame sliders
- Mounting hardware
- Mounting instructions
Fitment Notes
2006-2019 Yamaha FJR1300
Part Numbers
Our part number: | STP.06.590.10301.B |
Replaces these SKUs: | STP.06.590.10300.B |
Manufacturer part number: | STP.06.590.10301/B |
Fitment
Resources
Product Documents
Installation Instructions & Manuals
You may also like…
Kaoko Throttle Stabilizer Cruise Control for Yamaha FJR1300 ’01-’19, YZF-R1 ’04-’19 & YZF-R6 ’98-’19
In stock
$144.99 USD Add to cart
-
Best Seller
Left & Right Side Mirror Extenders For The Yamaha FZ1 FJR1300 2006-2015 Models
Not currently available to order
-
Closeout
R&G Racing Classic Style Frame Sliders for Yamaha FJR1300 ’06-’12
Low stock
$97.99 USD Add to cart
-
Related products
R&G Racing Aero Style Mid Engine Mount Frame Sliders for Select Triumph Models
Low stock
$110.99 USD Add to cart
-
R&G Racing Aero Style Frame Sliders for KTM 390 Duke ’15-’19 | Black
Special order
$210.99 USD Add to cart
-
R&G Racing Frame Sliders for Kawasaki Ninja 500R/ EX500 Classic Style
Special order
$97.99 USD Add to cart
-
Randy –
I bought this a month ago and glad I did. It fit nicely and I installed hiway pegs on it which were very nice on the 4,100 mile trip I just returned from. Highly recommend this product
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Randy –
I bought this a month ago and glad I did. It fit nicely and I installed hiway pegs on it which were very nice on the 4,100 mile trip I just returned from. Highly recommend this product
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Larry –
I bought this about a month ago for my 2015 FJR1300. It fell in a parking lot and I figured I better put sliders on it to prevent it being damaged again if it gets knocked over. These sliders are half the price of the ones sold by Yamaha, look better, and are very high quality. Took maybe 20 minutes to install. Would have taken half that time, but I had to take the right side off and remove one of the spacers because it extended out much further than the left side.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
JUAN-PABLO GALLEGO –
I have the same bike, could you provide a photo of how they look installed? Thank you in advance
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Zach Elseman –
We do not currently have images of this product installed other than the photos on this item page.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
2007FJRMan –
Have this on my 2007 FJR 1300, it’s a heavy bike so I’m glad I got this kit, personally I like the look if it on the bike and as far as it sticking out too much, that only bothers you till you drop the bike. I have gravel driveway and as I came in and braked the front tire slid out from under me. Fortunately I was going slow enough to put a leg down and help the bike down as gently as possible. Kept all body parts off the rocks other then the handlebar, in other words couldn’t be any happier about how far they stick out. Did not rate installation since I had it installed at the shop while getting other seasonal work done.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Frankie –
I decided to try these on my 2015 FJR1300ES because I had no familiarity with SW-Motech products. All parts are very nicely manufactured, beautiful in fact with very high quality materials. The design is just too complicated, and seemingly for no reason. There is a small spacer / stanchion, then a large spacer / stanchion, then a small plate, then a large M12 bolt, then a large plate, then the plastic slider, then two small M6 bolts, then a cover plate, then two small M4 screws (!?). With all of these pieces / parts, they stick out quite far as well. The stock photos don’t do this justice … a side view would be best for the Customer to see. The one advantage over other designs / manufacturers that I can see is that the plastic slider could be changed independently of the rest of the setup, but aside from that, this could be a two-piece design. They aren’t cheap either. Since they’ve been installed and have minor witness marks on them, I will be selling them used / “open box” on eBay as I don’t feel it is fair to return them as new.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Frankie –
I decided to try these on my 2015 FJR1300ES because I had no familiarity with SW-Motech products. All parts are very nicely manufactured, beautiful in fact with very high quality materials. The design is just too complicated, and seemingly for no reason. There is a small spacer / stanchion, then a large spacer / stanchion, then a small plate, then a large M12 bolt, then a large plate, then the plastic slider, then two small M6 bolts, then a cover plate, then two small M4 screws (!?). With all of these pieces / parts, they stick out quite far as well. The stock photos don’t do this justice … a side view would be best for the Customer to see. The one advantage over other designs / manufacturers that I can see is that the plastic slider could be changed independently of the rest of the setup, but aside from that, this could be a two-piece design. They aren’t cheap either. Since they’ve been installed and have minor witness marks on them, I will be selling them used / “open box” on eBay as I don’t feel it is fair to return them as new.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
james –
Nice kit but need to read directions.spacers are different lenths.looks good should work well.am happy with the the installation. Was vary easy.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Collin –
High quality, simple installation (<10 minutes). Sticks out a little further than I anticipated. Almost like highway pegs. I had a luggage mounting system from SW Motech on my old sportbike and it was very high quality as well.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal