SW-MOTECH Frame Slider Kit For Yamaha FJR1300 ’06-’19

STP.06.590.10301.B
  • SW-MOTECH Frame Slider Kit For Yamaha FJR1300 ’06-’19
  • stp_06_590_10301_1
  • stp_06_590_10301_3
  • stp_06_590_10301_4
  • stp_06_590_10301_5
  • SW-MOTECH Frame Slider Kit For Yamaha FJR1300 ’06-’19
  • stp_06_590_10301_1
  • stp_06_590_10301_3
  • stp_06_590_10301_4
  • stp_06_590_10301_5

 This product is no longer available.

Description

SW-MOTECH Frame Slider Kit is made of abrasion resistant synthetics. Easy to mount with included instructions. read more

-

Product Documents

Installation Instructions & Manuals

Brand:
SKU:
STP.06.590.10301.B
Categories:
,
Brand:
SW-MOTECH
Tag:
Weight:
2.4251 lbs
Dimensions:
1 × 1 × 1 in
view all details
Brand:

Closeout

Description

Included:

  • 2 frame sliders
  • Mounting hardware
  • Mounting instructions

Fitment Notes

2006-2019 Yamaha FJR1300

Part Numbers

Our part number: STP.06.590.10301.B
Replaces these SKUs: STP.06.590.10300.B
Manufacturer part number: STP.06.590.10301/B

Fitment

This Product Fits

Yamaha

Resources

Product Documents

Installation Instructions & Manuals

Reviews (8)

Share your thoughts!

4.25 out of 5 stars

8 reviews

Let us know what you think...

What others are saying

  1. Randy

    Good fit!

    Randy

    I bought this a month ago and glad I did. It fit nicely and I installed hiway pegs on it which were very nice on the 4,100 mile trip I just returned from. Highly recommend this product

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Randy

    Good fit!

    Randy

    I bought this a month ago and glad I did. It fit nicely and I installed hiway pegs on it which were very nice on the 4,100 mile trip I just returned from. Highly recommend this product

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Larry

    Larry

    I bought this about a month ago for my 2015 FJR1300. It fell in a parking lot and I figured I better put sliders on it to prevent it being damaged again if it gets knocked over. These sliders are half the price of the ones sold by Yamaha, look better, and are very high quality. Took maybe 20 minutes to install. Would have taken half that time, but I had to take the right side off and remove one of the spacers because it extended out much further than the left side.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. 2007FJRMan

    Saved me some money

    2007FJRMan

    Have this on my 2007 FJR 1300, it’s a heavy bike so I’m glad I got this kit, personally I like the look if it on the bike and as far as it sticking out too much, that only bothers you till you drop the bike. I have gravel driveway and as I came in and braked the front tire slid out from under me. Fortunately I was going slow enough to put a leg down and help the bike down as gently as possible. Kept all body parts off the rocks other then the handlebar, in other words couldn’t be any happier about how far they stick out. Did not rate installation since I had it installed at the shop while getting other seasonal work done.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Frankie

    Nice looking, but extremely over-complicated.

    Frankie

    I decided to try these on my 2015 FJR1300ES because I had no familiarity with SW-Motech products. All parts are very nicely manufactured, beautiful in fact with very high quality materials. The design is just too complicated, and seemingly for no reason. There is a small spacer / stanchion, then a large spacer / stanchion, then a small plate, then a large M12 bolt, then a large plate, then the plastic slider, then two small M6 bolts, then a cover plate, then two small M4 screws (!?). With all of these pieces / parts, they stick out quite far as well. The stock photos don’t do this justice … a side view would be best for the Customer to see. The one advantage over other designs / manufacturers that I can see is that the plastic slider could be changed independently of the rest of the setup, but aside from that, this could be a two-piece design. They aren’t cheap either. Since they’ve been installed and have minor witness marks on them, I will be selling them used / “open box” on eBay as I don’t feel it is fair to return them as new.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Frankie

    Nice looking, but extremely over-complicated.

    Frankie

    I decided to try these on my 2015 FJR1300ES because I had no familiarity with SW-Motech products. All parts are very nicely manufactured, beautiful in fact with very high quality materials. The design is just too complicated, and seemingly for no reason. There is a small spacer / stanchion, then a large spacer / stanchion, then a small plate, then a large M12 bolt, then a large plate, then the plastic slider, then two small M6 bolts, then a cover plate, then two small M4 screws (!?). With all of these pieces / parts, they stick out quite far as well. The stock photos don’t do this justice … a side view would be best for the Customer to see. The one advantage over other designs / manufacturers that I can see is that the plastic slider could be changed independently of the rest of the setup, but aside from that, this could be a two-piece design. They aren’t cheap either. Since they’ve been installed and have minor witness marks on them, I will be selling them used / “open box” on eBay as I don’t feel it is fair to return them as new.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. james

    sw-mottech frame slider kit yamaha fjr 1300 2013

    james

    Nice kit but need to read directions.spacers are different lenths.looks good should work well.am happy with the the installation. Was vary easy.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. Collin

    Looks good

    Collin

    High quality, simple installation (<10 minutes). Sticks out a little further than I anticipated. Almost like highway pegs. I had a luggage mounting system from SW Motech on my old sportbike and it was very high quality as well.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A link to set a new password will be sent to your email address.

Your personal data will be used to support your experience, manage access to your account, and for other purposes in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up