SW-MOTECH Crash Bars Engine Guards for Triumph Bonneville, SE & T100 ’04-’16 & Thruxton ’04-’15
- Description
- Part Numbers
- Fitment
- Resources
- Videos
- Add a review
Description
Kit Includes:
- 2 crash bars
- Mounting material
- Mounting instructions
Comppatible with MFW Crash Bar Footpeg mounts:
Part Numbers
Our part number: | SBL.11.249.10000.B |
Manufacturer part number: | SBL.11.249.10000/B |
Fitment
Resources
Product Documents
Installation Instructions & Manuals
Videos
You may also like…
R&G Racing Tail Tidy Fender Eliminator Triumph Bonneville Thruxton & Scrambler
Low stock
$166.99 USD Add to cart
-
R&G Racing Kickstand Shoe for Triumph Thruxton 900 ’04-’17
Special order
$59.99 USD Add to cart
-
R&G Racing Bar End Sliders for Triumph Street Triple / R, Speed Four, Daytona 600 / 650, TT600, and Thruxton
Low stock
$47.99 USD Add to cart
-
Kaoko Throttle Stabilizer Cruise Control for Triumph Thruxton 900 ’04-’15 & Street Triple ’08-’10 & Street Triple R ’08-’10
In stock
$139.99 USD Add to cart
-
New
R&G Racing Fork Protectors, Triumph Thruxton ’06-, Bonneville, Scrambler
Low stock
$56.99 USD Add to cart
-
Silver Crash Bar Foot Peg Folding Clamp On Mounts 0.85-1.125in Diameter Tubing
Not currently available to order
-
Closeout
Black Crash Bar Foot Peg Folding Clamp Mount For 0.85-1.125in Diameter Tubing
Not currently available to order
-
Closeout
Featured Video
Related products
SW-MOTECH Crash Bars Engine Guards for Kawasaki KLR650 ’87-’07
Not currently available to order
-
Best Seller Closeout
SW-MOTECH Crash Bars Engine Guards for Suzuki GSF1250S Bandit ’07-’13
Not currently available to order
-
Closeout
SW-MOTECH Crash Bars Engine Guards for Kawasaki Versys 650 ’07-’14
Not currently available to order
-
Best Seller Closeout
Ask a Question
Lee-Anne –
Hi I have a Triumph T100 2008 looking to by crash bars to suit.
Cheers Lee-Anne
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
James Howorth –
Easy 20-25 minute installation, well designed product, attached my highway pegs and can now ride in comfort on those 400 mile days instead of wanting my legs amputated
Thanks for an amazing product, fits the triumph very well
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Ask a Question
Kyle –
Hey, would these bit a 2004 Triumph Thunderbird Sport?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Ask a Question
Drew –
I’ve seen these bars on the first generation Triumph Scrambler air cooled 865 (2004 to 2016), and there is even a YouTube video of a guy installing them on his 2014 Scrambler 865 without making any modifications. Is there a reason why the first generation Triumph Scrambler 865 (2004-2016) is not listed as a compatible bike?? Will these bars fit the Scrambler 865??
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Csousa –
Offers decent protection while preserving the look of the bike.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
JonM –
Had a little problem with one bolt. Would not thread properly (faulty threading) but easily found a replacement bolt locally for under $2, so no big problem. Looks great. Was able to mount it with my ignition re-location bracket after modifying the bracket to fit under the mounting point like a spacer (left hand side – Joker ignition relocation bracket). Overall, makes me feel a little safer if the bike were to drop.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
rkevwill –
Great crash bars, heavy duty, will do their job well. Problem is, it does limit you being able to install a steering damper, and most bash plates. They use the same mounting points.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
jim –
solid crashbar with three points of attachment. position on bike works well for me.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
dntower85 –
I chose these bars do to the three point mounting points on each side. Most of the crash bars (including the factory dress bars) just have two mounting points and will just fold back if the bike is dropped while moving. The fit and finish was perfect, no bending or drilling out holes was needed to fit to the frame. I added some Hwy Pegs to the bars, after a test ride I decided to move the pegs, I was afraid the clamps might of scratched the finish but the finish is tough and did not scratch.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
TerryW –
The bars are of good quality and well made. Instructions are sufficient, but make sure you have loctite and a torque wrench on hand.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
crispell –
Engine guards came in quickly and installed per the directions and easily. They are rock solid with 3 connection points on each side. The only reason I didn’t give it 5 stars was because I was missing one metric #10 stainless washer. Luckily the local hardware store had it and the job was completed shortly thereafter. This is my wife’s bike and I wanted to add some protection.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
doc –
The bars fif well and was impressed by the swift delevery, thankyou for your service
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal