SW-MOTECH Crash Bars Engine Guards for Yamaha XT1200Z Super Tenere ’10-’19
- Description
- Part Numbers
- Fitment
- Resources
- Videos
- Add a review
Description
Installation of these bars does require the removal of the Yamaha rubber cross bar.
Fitment Notes2010-2019 Yamaha XT1200Z Super Tenere
Part Numbers
Our part number: | SBL.06.162.10000.B |
Manufacturer part number: | SBL.06.162.10000/B |
Fitment
Resources
Videos
You may also like…
Black Crash Bar Foot Peg Folding Clamp Mount For 0.85-1.125in Diameter Tubing
Not currently available to order
Closeout
Silver Crash Bar Foot Peg Folding Clamp On Mounts 0.85-1.125in Diameter Tubing
Not currently available to order
Closeout
Featured Video
Related products
GIVI TN528 Crash Bars Engine Guards for Suzuki DL1000 V-Strom ’02-’12
In stock
$165.60 USD Add to cart
Sale
SW-MOTECH Crash Bars Engine Guards for Kawasaki Versys 650 ’07-’14
Not currently available to order
Best Seller Closeout
SW-MOTECH Crash Bars Engine Guards for Select BMW Motorcycles
Not currently available to order
Closeout
Ask a Question
Robert –
Can this crash bar be installed in conjunction with the Yamaha lower engine crash bar?
https://www.yamaha-motor.ca/en/road/motorcycle/adventure/build-price/customize/2021-super-t-n-r-es/2021-XTZ12A#see-details
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Zach Elseman –
Installation of these bars does require the removal of the Yamaha rubber cross bar.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Ask a Question
Ron –
i assume this is a ‘set’ that covers both sides of the bike?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
The Twisted Team –
Correct – these arrive as a pair…both left and right hand side for ultimate protection!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Ask a Question
Ken –
Are there foot pegs that can be attached to these crash bars?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Matt –
I bought a set for my Suoer Tenere about month or so ago. The installation was fast and easy. A couple of weeks later, I had a Humpty Dumpty moment while parking on some rough payment. Thought my kickstand was deployed but it wasn’t all the way down. But the time I realized it, the bike was over too far to recover. The pavement scuffed the finish on the bars in a couple of places but no distortion of the bars and no damage to the bike. Great product and worth every penny!!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Tom the Boom –
The crash bars look very good quality.They are made in Czechoslovakia, which is known for good quality workmanship, I wish that I never will test in a real crush.Not hard to install, just carefull on engine bolt to remove at a time.They look good on the bike.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
WingRider1568 –
Had SW-Motech’s on a couple KLR’s and loved them, so looked at these for the Tenere also. Glanced at others but these looked the best on the bike by following lines on the bike and best protection also. Mounting was easy enough, everything aligned perfect. Couldn’t be happier.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Vsbiker –
Just added the SW Motech crash bars to my Super Tenere ES 2017. Installation was very easy, they look great and are well built. Very please with the bars and delivery.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Pat –
The crash bar look great, it fits the bike perfectly and was easy to install. Moreover it cover the very delicate cooling system of the bike.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Adventure Rider –
I just received mine and they are top notch in appearance and quality; I could not be happier.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
chewbaka2190 –
I bought new 2015 yamaha super tenure and sw motech crash bars are awsome easy installation. I layed the bike down gentley no damage and used the crash bar to pick it made it so easy to pick the bike up no damage !!! highly recommend these sw motech bars for every adventure bike !!!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Miffls –
My first experience with SW-Motech crash bars was a few years back for my BMW R1200GS. they were a snap to install then with great looks and crash protection and now once again for my Yamaha Super Tenere. Keep up the great work SW-Motech!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Rocketmann –
Just bought a 2015 Yamaha Super Tenere’ ES in June. Put 4000 miles on it during the summer touring the NorthWest. I knew that I had a lot to do in equipping it for the off road, and I’m glad I did with the most recent purchase of the crashbars. I went down off road on what I’d call a split surface, part asphalt and part gravel. The surroundings were all over the place. Thank goodness that I just installed the bars recently and it made all the difference in the world. I even had to rotate the bike on its side 180 degrees just to lift this 650 plus pound bike. Not even a scratch to the bike, limited scuffs to the bars. If you don’t have this product, think again.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Superfunkomatic –
Great fit, sure crash bar offer better protection. Easy to remove right side plastic cover to access battery, bar a great support for a go pro or auxiliary lights. Only concern, these crash bars are on the heavy side. Only for that reason I’m not sure I will keep these.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Superfunkomatic –
Great fit, sure crash bar offer better protection. Easy to remove right side plastic cover to access battery, bar a great support for a go pro or auxiliary lights. Only concern, these crash bars are on the heavy side. Only for that reason I’m not sure I will keep these.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
BrowerG –
This is our second set of crash bars for the Super Tenere. Great design and strength and they look awesome on the bike!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Bob –
So far all I can say about the Motech crash bars is that they’re finished well, the fit is precise, and installation was easy. I haven’t put them to the test in a lay down yet, although I did manage to hit a seagull on the right-side bar an hour after installation. ( The seagull was not wearing a helmet)
Packaging was extraordinary. If they arrive damaged, the delivery company ran them over with a truck.
Twisted Throttle delivered quickly with no problems whatsoever.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Josh –
I bought them and they arrived in about 5 days. Installation took maybe 20 minutes and they look great. The only thing that isn’t so great is that I care a lot less now if my bike falls over because they’re well protected.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
marmot –
Firstly, great service from TT as always, thanks! These guards are made out of wonderfully heavy-duty steel, and are just what I wanted to protect this ridiculously heavy moto.
Installation was somewhat difficult as the holes didn’t quite want to line up on my ’14 ES, but they ultimately did with a bit of coercion. Welds are great, powder coating is well done, and stickers come off easily if you want a stealth look.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
redrider –
Perfect fit easy to install and are very sturdy. Haven’t been down with them yet but should be good protection in all but the worst.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal