SW-MOTECH Crash Bars Engine Guards for Suzuki DL650 V-Strom ’12-’19 & V-Strom 650XT ’15-’19

SKU:SBL.05.757.10000.B
  • phpqCYJnz
  • phpAxr0w6
  • phpnIdDwE
  • phpqCYJnz
  • phpAxr0w6
  • phpnIdDwE

Description

Constructed of heavy-duty mild steel SW-MOTECH crash bars are designed to provide maximum protection optical integration and high-quality fit and finish.

read more

Product Documents

Brand:
SKU:
SBL.05.757.10000.B
Categories:
,
Brand:
SW-MOTECH
Weight:
14.55050929 lbs
view all details
Brand:

Price

$235.95 USD

Quantity

- +

Total

$235.95 USD

low stock - order soon

- +

Best Seller

Description

All components are protected against corrosion by sandblasting and powdercoating. High-strength frame mounting points. Black.

Constructed of 27mm outer-diameter mild steel tubing.

SW Motech engine bars WILL fit the OEM lower cowling without any modification.

Part Numbers

Our part number: SBL.05.757.10000.B
GTIN13 / EAN: 4052572011645

Fitment

This Product Fits

MakeModelYear
MakeModelYear
SuzukiV-Strom 6502017
SuzukiV-Strom 6502018
SuzukiV-Strom 6502019
SuzukiV-Strom 650XT2015
SuzukiV-Strom 650XT2016
SuzukiV-Strom 650XT2017
SuzukiV-Strom 650XT2018
SuzukiV-Strom 650XT2019
SuzukiV-Strom DL6502012
SuzukiV-Strom DL6502013
SuzukiV-Strom DL6502014
SuzukiV-Strom DL6502015
SuzukiV-Strom DL6502016

Resources

Product Documents

Videos

Reviews (15)

Share your thoughts!

4.6 out of 5 stars

15 reviews

Let us know what you think...

What others are saying

  1. Mikehn

    Well made, fit and finish are first rate

    Mikehn

    I’ve read many reviews and decided to buy the sw motech crash bars for my vstrom. I’m very happy with the construction, fit and finish. I was apprehensive about installing it myself, but it was not bad. It looks good. Hopefully, I don’t have to put it to use.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Little Al

    Not quite right

    Little Al

    I waited for these crash bars to be 1 for my 2017 v-strom 650 and they fit nice on the bike, sturdy, and have a good finish. Today I mounted a Ravetech skid plate and realized that the left side crash bar tube that meets the righ side tube in front of the engine was welded at an off angle of a few degrees. this in turn forced the skid plate to the rear just enough to make interference with the center stand an issue. Hence the 3 stars

    I

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Markman

    Best crash bars on the market

    Markman

    Easy to install They make the bike look like it should Very strongly made bars. 3500 miles on my 2017 Vstrom 650 with SW add-ons and I am extremely satisfied. Sound quality construction from SW at Twisted Throttle

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Dan

    Good Design.

    Dan

    Well made and it looks like they will hold up well in a “drop”. Some have had trouble with the bolt holes lining up, but if you install all the hardware before doing the finally torquing down it’s no problem

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Powderbob

    Motech crash bars for 2017 v-srom

    Powderbob

    Purchased and installed in October. Bars were as depicted in photos and easy to install. Perfect fit with no juggling.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. delta164

    Quality product with blemishes

    delta164

    Product took a while to ship but after calling Twisted Throttle was advised this was as they were waiting to receive their SW Motech shipment. After being shipped, the product arrive well packed and exactly on the day they estimated. Product is very nice and goes together easily. However, mine arrived with multiple nicks and scratches in the finish. The product looks new so perhaps this was a quality control issue in manufacturing. Outside of the nicks and scratches the finish is excellent.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. Icantuseadashhere

    Simple Installation and perfect fit

    Icantuseadashhere

    Simple instructions to get them to line up the first time:
    Remove the bolts from the left side of the engine (or right it really doesn’t matter just one at a time)
    Put the front top and the bottom rear bolt in through the bars and just get them threaded
    Now with the first 2 bolts in and the bar hanging on them fit the inside bolts with thread locker
    Remove and rethread the first two bolts with thread locker, tighten all 4 bolts just until they are snug
    Repeat the process on the other side, once you snug the bolts on the second side check the alignment on the crossbar. Jiggle things around and loosen off bolts if you need to but they will come close together eventually.
    Once you get them close, thread the crossbar bolts into place, these bolts will pull the bars together. Easiest way to tighten these is to turn the handlebars towards the side your working from, you won’t need a wrench on the nut because the holes in the back are fitted to hold it already, just tighten the allen key.

    Lastly, torque everything down, I started at the top left bolt then the bottom right and kept alternating from one side to the other until they were all tight.

    The entire installation took 30 minutes. Simple easy fit, thanks!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. Dean

    Perfect fit

    Dean

    Is so glad I purchased this crash car and skid plate. They look great and went on so easy. I also installed some foopegs on the bar for when I am on the highway. They almost fold out of sight.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. Dean

    Perfect fit

    Dean

    Is so glad I purchased this crash car and skid plate. They look great and went on so easy. I also installed some foopegs on the bar for when I am on the highway. They almost fold out of sight.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. Ken

    Great buy

    Ken

    Very solid and high quality with great fit. They look great on the bike but also blend in like a factory install. The hardest part was getting the factory mounting bolts out…holy thread locker!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  11. Steve

    Excellent fit and quality

    Steve

    I got these for my wife’s 2012 V-strom. The finish and fit of the bars was perfect, all hardware provided and installation was easy with the simple instruction sheet. They look great on the bike and she is delighted with them. Great product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  12. davidxyz

    excellent!

    davidxyz

    Fast delivery. Easy to install. Sturdy. Look great. More protection at lower cost than the oem bars.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  13. VTrooper

    Decent

    VTrooper

    Beefy bars. The left side didn’t line up that well with the right side at the connection in front of the engine — close enough to make it fit, though. Shiny black paint doesn’t match the matte black of the vstrom 650 and looks a bit out of place. The design blocks the bolt used by frame sliders, so you can’t have both these and frame sliders.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  14. VSteeBoy

    Better than the competition!

    VSteeBoy

    I bought the SW-MOTECH crash bars for my 2012 Suzuki V-Strom DL650. They arrived in four days, shipped free! Installed in half an hour. Look great! Hope I never find out how durable they are!
    In contrast, on the same day I ordered other accessories for my Wee from another company which shall remain nameless (initials HT). A month later I have only received two of the four items I ordered, one which I have to send back. My fault for not reading the description carefully – it wasn’t REALLY “Universal”, just kinda. Couldn’t have put it on anyway as they forgot the hardware! The other item, a skid plate, is awaiting the arrival of the adapter kit to fit the SWM bars. Still awaiting other items and return shipping labels. It’s actually worse than that but this is the short version.
    In summary, my first experience with Twisted Throttle and SWM are positive and I’ll definitely be back!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  15. CutterBill

    Great Bars

    CutterBill

    Installed these crashbars on my 2014 Suzuki DL650. Perfect fit, easy to install, and they look great. A quality product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up