SW-MOTECH Crash Bars Engine Guards for Kawasaki KLR650 ’08-’18
This product is no longer available.
Description
SW-MOTECH Crash Bars Engine Guards for Kawasaki KLR650 now bolt to the frame instead of the foot peg bolts for greater strength.
read more
-
Product Documents
Installation Instructions
Questions? Call 1-855-255-5550 or contact our sales team
Closeout
- Description
- Part Numbers
- Fitment
- Resources
- Videos
- Add a review
Description
Behind the Tech: SW-MOTECH’s Torture Tested KLR Gear
Special Note: These Crash Bars are compatible with the revised SW-MOTECH welded Skid Plate MSS.08.469.10000 with cutouts to accept the Crash Bars frame mounts but are NOT compatible with the earlier style SW-MOTECH riveted Skid Plate MSS.08.347.10001. If you’re not sure which version you have please contact our Customer Service at 855-255-5550 and we will be glad to help.
Features:
- 27mm heavy-duty mild steel tubing
- German engineered precision fit
- Rear mounting point clamps to frame
- No foot peg mounting necessary
- Powder coated black finish
- Three mounting points on each side
- Vibration-isolating bushings (front mounts)
Includes:
- Left & right crash bars
- Complete mounting hardware
- Installation instructions
KLR 650 Crash Protection Fitment Compatibility
| KLR 650 ’08-’18 | Crash Bars | Skid Plate | Center Stand | |||
| SBL.08.297.10002 | RG.AB0014 | GiviTN421 | MSS.08.469.10001 | HPS.08.473.10000 | ||
| Crash Bars | SBL.08.297.10002 | Yes | Yes | |||
| RG.AB0014.BK | Yes | Yes | ||||
| GIVI TN421 | No | Yes | ||||
| Skid Plate |
MSS.08.469.10001 | Yes | Yes | No | Yes | |
| Center Stand | HPS.08.473.10000 | Yes | Yes | Yes | Yes | |
| KLR 650 ’86-’07 | Crash Bars | Skid Plate | Center Stand | ||
| SBL.08.274.100 | SBL.08.297.10002 | MSS.08.347.10000.B | HPS.08.321.100 | ||
| Crash Bars | SBL.08.274.100 | Yes | Yes(W/ HW)* | ||
| SBL.08.297.10002 | No | Yes | |||
| Skid Plate | MSS.08.347.10000.B | Yes | No | Yes | |
| Center Stand | HPS.08.321.100 | Yes(W/ HW)* | Yes | Yes | |
**(W/ HW)** With HardWare kit (Free)
Part Numbers
| Our part number: | SBL.08.297.10002 |
| Replaces these SKUs: | SBL.08.297.10001 |
| Manufacturer part number: | SBL.08.297.10002/B |
Fitment
Resources
Product Documents
Installation Instructions
Videos
You may also like…
MFW Rider Mounts to fit MFW Footpegs for Select Kawasaki Motorcycles
Not currently available to order
Foot Pegs-
Closeout
Black Crash Bar Foot Peg Folding Clamp Mount For 0.85-1.125in Diameter Tubing
Not currently available to order
Foot Pegs-
Best Seller Closeout
Kaoko Throttle Stabilizer Cruise Control for Select Kawasaki Motorcycle Models
In stock - Usually ships within 24 hours
$146.99 USD Add to cart
Throttle Locks-
Silver Crash Bar Foot Peg Folding Clamp On Mounts 0.85-1.125in Diameter Tubing
Not currently available to order
Foot Pegs-
Closeout
Related products
SW-MOTECH Crash Bars Engine Guards for Triumph Tiger 1050 ’07-’12
Not currently available to order
Crash Bars-
Closeout
SW-MOTECH Crash Bars Engine Guards for Yamaha FZ1 Fazer ’06-’15
Not currently available to order
Crash Bars-
Closeout
SW-MOTECH Crash Bars Engine Guards for Kawasaki Versys 650 ’07-’14
Not currently available to order
Crash Bars-
Closeout
Shaunflash5000 –
I’ve been wanting these bars since I bought my new KLR in ’17. I pulled the trigger this summer and began outfitting my bike for TAT ride next spring. I have come close to laying down my bike a couple times, but always rode a little more cautiously then I wanted. I knew that without these bars, a cracked cowl or a damaged radiator would be very costly. Now I can ride like I want knowing that these bars will protect my front end. Not to mention: They look BAD A**!
Installation was fairly simple. Start to finish took about an hour. I do recommend watching a couple videos (plenty on YouTube). I also recommend having a friend to help.
(0) (0) Watch Unwatch
Advman –
Saved the plastics more than once. No damage done at all. Good finish on bars.
(0) (0) Watch Unwatch
Eryx66 –
Great investment!!! Waited until I got these to go out in the trails and happy I did! They work great lol !
(0) (0) Watch Unwatch
truckmanonfire –
Got the sw motec crash bars and skid plate and they weren’t to crazy hard to install. Skid plate covers complete engine with a cutout for the drain plug. Factory drain plug is protected nicely, engine cases fully protected. Crash bars are a nice fitment as well. Total install time for me was 3 hours. Skid plate Installed easyer with a helper. Both are built well to protect you ride
(0) (0) Watch Unwatch