SW-MOTECH Crash Bars Engine Guards for BMW F650GS ’08-’12, F700GS ’13-’18 & F800GS ’08-’18
- Description
- Part Numbers
- Fitment
- Resources
- Videos
- Add a review
Description
All components are protected against corrosion by sandblasting and powdercoating. High-strength frame mounting points. Black.
Crashbar includes a built-in M10 hole for mounting a set of MFW Footpegs. Requires M10 Footpeg Joint Kit.
Constructed of 27 mm outer-diameter mild steel tubing.
Part Numbers
Our part number: | SBL.07.556.10000.B |
Replaces these SKUs: | SBL0755610001B |
Replaced by these SKUs: | SBL0755610001B |
Manufacturer part number: | SBL.07.556.10000/B |
Fitment
Resources
Product Documents
Installation Instructions & Manuals
Videos
You may also like…
R&G Racing Front Axle Sliders / Protectors|BMW F650GS ’08-’12, F700GS ’13-’18
Low stock
$56.99 USD Add to cart
-
R&G Racing Adventure Bar Crash Bars for Select BMW Motorcycles
Special order
$417.99 USD Add to cart
-
Silver Crash Bar Foot Peg Folding Clamp On Mounts 0.85-1.125in Diameter Tubing
Not currently available to order
-
Closeout
R&G Racing Frame Insert Front Left Side or Right Side For Husqvarna & BMW
Special order
$24.99 USD Add to cart
-
R&G Racing Rear Axle Sliders / Protectors For BMW F700GS ’13-’18
Low stock
$58.99 USD Add to cart
-
R&G Racing Bash Plate Engine Guard Skid Plate For Select BMW Motorcycles
Low stock
$90.99 USD Add to cart
-
Black Crash Bar Foot Peg Folding Clamp Mount For 0.85-1.125in Diameter Tubing
Not currently available to order
-
Closeout
R&G Racing Radiator Guard Black For Select BMW Motorcycles
Special order
$87.99 USD Add to cart
-
Featured Video
Related products
SW-MOTECH Crash Bars Engine Guards for Triumph Tiger 1050 ’07-’12
Not currently available to order
-
Closeout
SW-MOTECH Crash Bars Engine Guards for Select BMW Motorcycles
Not currently available to order
-
Closeout
SW-MOTECH Rally Style Crash Bars Engine Guards for BMW R1100GS ’94-’99
Not currently available to order
-
Closeout
Gaijin –
Great stuff, fast shipping. My favorite crash bar.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
John –
Beefy, nice quality. Instructions were ok, missing a few washers.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
shadowpaw –
We put these on my new bike and went for a ride that night. Second day I had the motorcycle and I ended up laying her down while trying to navigate a slow descending turn into a gravel parking lot. The bars were a bit scuffed up but the bike itself was perfectly fine. This is exactly why we purchased these bars and I am so glad we did!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Tino –
Better looking than the original. Great protection, for the engine and the upper side.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Superfunkomatic –
Was just like described and fit exactly. Turn around time great!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Kevin –
I put these on my 2015 F 800 GS. I had a pair on my KLR. They fit great and don’t stick out too far. My only gripe is the instructions are a little vague when it comes to which spacers to use. I was able to figure it out with some trial and error. They look great and from past experience they are very tough.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
kevi914 –
I bought these about 4 weeks ago. They were easy to install and look great on the bike. My only negative would be that I wish the hardware matched the hardware on the bike. I may change it out down the road
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
kzf700gs –
While I don’t intend on dropping the F700GS, these crash bars will be the first to interface. One of the first upgrades I had planned on, and after much research & reading about others’ experiences and likes I decided on the SW Motech bars. Relatively easy on the pocket book.
Upon receiving the package, I checked all parts against the list and made sure I’d have the necessary tools. I suggest that you read the instructions through completely before any removal/ installation work. Bars are of quality construction, design, and were quite easy to install: removal of two bolts, and everything else you need is in the package. You will have extra spacers and bolts, as this kit has everything needed for installing on different bikes. It is fairly easy to separate out what is needed for your bike & what isn’t, but plan an extra 10 minutes to verify.
They look great on the bike, provide possibilities for LED lighting mounts later, don’t stick out far from the bike & look like extensions of the bike’s design.
Overall a great product, and am very happy with them.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Amr –
I bought the subject Crushbars/Engine Guard a few weeks ago and I recieved the shippment within few days; the engine guard is very well designed and looks like an integrated part of the bike, it did not change or hide the original look of the bike. The bike looks amazing and butiful and you cannot even notice that a new part is added to the bike. Thanks god the bike hasn’t been dropped but I feel it will be very well protected. One thing I would change is the instructions, it should be specific for the bike and not include more than one bike, it took long time to identify the parts.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
DCHagan2 –
My F800GS fell over on the right side from the center stand (sunk into the asphalt). The only damage was scratches on the engine guard and broken plastic on the hand guard. A must have to protect your investment!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
none –
Very happy with the SW-MOTECH Crashbars. They are very well made and fit well, The only thing I would change would be the instructions which include more than one bike. Not real clear due to sizes of screws and spacers being close in size, and you don’t use all. Still a great product.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Hal –
I decided to go with the SW -Motech
crash bars because of the protection I thought they would provide . Let me tell you , 1 week after I installed the bars, the bike went down on it’s right side
Not ONE SCRATCH ! ( the right bar has a couple of marks from the asphalt .
These bars will ABSOLUTELY protect your new F700GS – take it from someone who knows !
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal