SW-MOTECH Crash Bars Engine Guards for BMW R1200R ’07-’14
- Description
- Part Numbers
- Fitment
- Resources
- Videos
- Add a review
Description
Provides protection to both the fairing and engine without interfering with oil changes or removal of cylinder head covers for valve adjustments.
All components are protected against corrosion by sandblasting and powdercoating.
The black powdercoated finish has a gloss clear topcoat providing an additional layer of rust protection and beautifying your ride!
High-strength frame mounting points and 26.9mm diameter mild steel tubing provide heavy duty protection.
Same as the SW-MOTECH crash bars made for Wudo Germany (just a different brand sticker).
Please Note:
- Will not fit the ’15 Water-cooled R1200R
- Not for use with Remus Revolution exhausts.
Customer Testimonial
Last July I had a “parking lot” accident – I was cut off at a local university by a speeding cyclist (pedal powered) and my machine went down. I tried to keep it up with my right hand and the throttle opened in first gear. The machine launched without me and came down sans instrument panel brake reservoir LH mirror the handlebars into the gas tank. Get this: I had SW Motech crash bars on and they were badly crushed and scrapped ON BOTH sides of the bike but besides a scrapped magnesium head no damage to the engine! The total crash bill:
$6 000+. Without my “mo-techs” (cost: ~two hundred bucks) the machine would have been a total loss.I cannot recommend these strongly enough. The best thing(s) are:
1. They look great – black steel tubing just like your frame.
2. You can rest your feet on them while cruising to “stretch your legs”Attached is a link to “Twisted Throttle” – I have now ordered two sets (original and replacement) and I enthusiastically recommend both.
Part Numbers
Our part number: | SBL.07.606.100.B |
Manufacturer part number: | SBL.07.606.10000/B |
Fitment
Resources
Product Documents
Installation Instructions & Manuals
Videos
You may also like…
Silver Crash Bar Foot Peg Folding Clamp On Mounts 0.85-1.125in Diameter Tubing
Not currently available to order
-
Closeout
Black Crash Bar Foot Peg Folding Clamp Mount For 0.85-1.125in Diameter Tubing
Not currently available to order
-
Closeout
Featured Video
Related products
SW-MOTECH Crash Bars Engine Guards for BMW F650CS Scarver ’02-’06
Not currently available to order
-
Closeout
SW-MOTECH Crash Bars Engine Guards for Kawasaki Versys 650 ’07-’14
Not currently available to order
-
Best Seller Closeout
SW-MOTECH Crash Bars Engine Guards for Select KTM Motorcycles
Not currently available to order
-
Closeout
Ask a Question
Stu –
Hi, do you happen to have an ETA for the SW-MOTECH CRASH BARS ENGINE GUARDS FOR BMW R1200R ’07-’14 that are showing as on order
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Marty –
Have not put them to a tip over, fall test. Look good, installed smoothly. Nice spot for auxiliary lights.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
golanmoto –
i bought those guards and installed them in 2015. the guards are heavy duty made, very good quality. the BMW cylinders are not parallel that means the guards should be different on each side in order to perfectly fit. that was not the situation. i had to enlarge one hole on one side of the guard in order to install it and after installation it is not as promised, if you need to do maintenance to the bike, like valve adjustment you will have to uninstall the guard on one side. i think it is the manufacturer problem but i did not get any satisfying solution despite my emails on the subject. i recommend the item because of it’s quality but be aware of the problem i mentioned. if you want a perfect fit you need to buy from a different manufacturer, not sw-motech.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jack –
This is the second time I have bough this item in the past 10 years. Great product
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
robr1200r –
I crashed at about 40mph after hitting some sand in the median on a curvy road in early spring. The right side engine guard saved my right cylinder cover and cylinder head. I really didn’t buy these to take that kind of impact but just the normal drops a rider may have. I was really impressed with how they stood up to a 40mph impact and slide. I bought another one to replace it! Very durable product!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Sandeep –
I purchased these from Twisted throttle and couldn’t be happier. SW Motech is top notch quality and this engine crash guards didn’t disappoint. Easy to install, took about 30 minutes. I looked at many and they were crazy over priced. Then when i saw the SW Motech, i figured let me order and try it and in the flash sale they were under $200. perfect product, fast free shipping, great dealer support when i talked to them
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Gareful –
I ordered a set of SW-Motech crashbars two months ago on a Thursday morning and they were delivered on Saturday morning. In less than an hour I installed them and they looked great. I think these could pay for them selves with just one tip-over. They don’t take away from the looks of the bike at all and the protection is well worth getting a set.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Sweettooth –
I like the protection and look of the SW Motech engine guards. Unfortunately mine arrived with a small scuff in the metal/ paint. I wanted them on for a road trip so I didn’t bother making it an issue. I’m sure TT would have exchanged them. Overall a solid product but check for any damage when you get them.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
hoflix –
I had this bars on an 08 r12r and used it for 40k+ miles, during which time i went down violently many times in the dirt, (i know, i know it’s not a dirtbike 🙂 ), and dropped the bike a couple of times on the street, with the engine intact, and was able to keep riding every time.
These are SOLID bars, high quality build.
They are also great to rest your feet on during long trips.
I just bought my second R1200R yesterday, and these crashbars will be the very first addition.
I highly recommend them.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Humberto –
My r1200r already has aluminum covers over the cylinders. They stick out about a quarter inch. Will these crash bars fit without having to remove the covers ?
Could I put a metal spacer to bring the bars farther out to accommodate the covers ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal