SW-MOTECH Crash Bars Engine Guards for Select BMW Motorcycles
- Description
- Part Numbers
- Fitment
- Resources
- Videos
- Add a review
Description
The SW-MOTECH crash bars engine guards for BMW R nineT R nineT Pure R nineT Racer and R nineT Scrambler provide protection in the event of a tip over slide or crash to minimize damage and safeguard the vulnerable cylinder heads. Sturdy tubular steel mounts directly to the frame with no drilling cutting or welding. Installation is 100% bolt on with all necessary hardware included. These attractive crash bars are powder coated black for durability and corrosion resistance. Designed and over-engineered in Germany to keep your Bavarian beauty safe. Invest in top quality protection for the R nineT with these crash bars from SW-MOTECH!
Features:
- Robust tubular steel
- Secure frame mounted support
- 100% bolt-on installation
- Compatible with the SW-MOTECH Skid plate
- Protects cylinder heads and other critical components
- Durable powder coated black finish
- Designed specifically for the R nineT
- Made in Germany
What’s in the box:
- Left & right side crash bars
- Mounting hardware
- Installation instructions
2014-2019 BMW R nineT
2017-2019 BMW R nineT Pure
2017-2019 BMW R nineT Racer
2018-2019 BMW R nineT Urban G/S
2017-2019 BMW R nineT Scrambler
Part Numbers
Our part number: | SBL.07.512.10000B |
Manufacturer part number: | SBL.07.512.10000/B |
Fitment
Resources
Product Documents
Installation Instructions & Manuals
Videos
You may also like…
SW Motech Frame Cap Set for BMW R nineT R nineT Pure R nineT Urban G/S & R nineT Racer – Black
Not currently available to order
-
Closeout
SW-MOTECH SLC Side Carrier for BMW R nineT / Pure/ Racer / Urban G/S – Left
Not currently available to order
-
Closeout
SW-MOTECH Legend Gear SLA Tank Strap for BMW R nineT / Pure / Racer / Scrambler / Urban G/S
Low stock
$80.95 USD Add to cart
-
Closeout
R&G Racing Shocktube Rear Shock Protector for Select Motorcycles
In stock
$43.99 USD Add to cart
-
SW-MOTECH Quick Release GPS Mounting Base for select motorcycles
Not currently available to order
-
Closeout
SW-MOTECH Gold Brake Reservoir Guard for BMW R1200GS and R nineT / Pure / Racer / Urban G/S / Scrambler
Not currently available to order
-
Closeout
R&G Racing BMW Motorcycle Parts – Top Yoke Cap for S1000XR
Special order
$24.99 USD Add to cart
-
SW Motech Frame Cap Set for BMW R nineT R nineT Pure R nineT Urban G/S & R nineT Racer – Gold
Not currently available to order
-
Closeout
R&G Racing Kickstand Shoe for BMW R nineT ’14-’16
Low stock
$59.99 USD Add to cart
-
R&G Racing Stainless Steel Oil Cooler Guard for BMW R nineT ’14-’19
Low stock
$77.99 USD Add to cart
-
R&G Racing Motorcycle Turn Signals – Front Indicator Adapters for Select BMW Motorcycles
Low stock
$21.99 USD Add to cart
-
R&G Racing Mirror Risers For BMW S1000R ’14-’20, S1000XR ’15-’19, S1000R ’14-’20, rNineT ’14-’19, & R1250GS ’19-’20 Models
Low stock
$24.99 USD Add to cart
-
R&G Racing Bar End Sliders for BMW S1000RR, S1000R, HP4, and R nineT
In stock
$47.99 USD Add to cart
-
R&G Racing Front Axle Sliders for Select BMW R nineT | Spoked Wheels
Special order
$56.99 USD Add to cart
-
SW-MOTECH Silver Potentiometer Guard for BMW R1200GS and R nineT / Pure / Racer / Urban G/S / Scrambler
Not currently available to order
-
Closeout
GIVI Side Racks to Fit Easylock Side Bags for BMW R nineT
Not currently available to order
-
Closeout Sale
R&G Racing Tail Tidy Fender Eliminator Kit For US Spec BMW R nineT ’14-’19 | Single Seat Mode – Pillion Seat, Speedhump & Subframe removed
Low stock
$254.99 USD Add to cart
-
R&G Racing Exhaust Hanger for BMW R nineT ’14-’19 | Black
In stock
$105.99 USD Add to cart
-
R&G Racing Rear Axle Slider Fork Protector for Select BMW Motorcycles (right side)
Low stock
$36.99 USD Add to cart
-
Kaoko Throttle Stabilizer Cruise Control for Select BMW Motorcycles
In stock
$139.99 USD Add to cart
-
R&G Racing Frame Insert Right Side BMW R NineT ’14-’19
Special order
$36.99 USD Add to cart
-
SW-MOTECH Gold Potentiometer Guard for BMW R1200GS and R nineT / Pure / Racer / Urban G/S / Scrambler
Not currently available to order
-
Closeout
R&G Racing Adventure Bar Crash Bars for BMW R nineT ’14-’19
Special order
$369.99 USD Add to cart
-
R&G Racing Oil Cooler Guard for BMW R nineT
Low stock
$69.99 USD Add to cart
-
R&G Racing Triumph Motorcycles – Top Yoke Cap for Daytona 675 (Also Fits BMW S1000RR BMW S1000R & R nineT)
Low stock
$24.99 USD Add to cart
-
SW-MOTECH SLC Side Carrier for BMW R nineT / Pure/ Racer / Urban G/S – Right
Not currently available to order
-
Closeout
SW-MOTECH Front Axle Slider Kit For BMW R nineT
Low stock
$69.95 USD Add to cart
-
Closeout
SW-MOTECH Left and Right Side Aluminum Cylinder Guards for Select BMW
Not currently available to order
-
Closeout
R&G Racing Tail Tidy Fender Eliminator Kit For BMW R nineT ’14-’19, R nineT Pure ’17-’19, R nineT Racer ’17-’19 & R nineT Scrambler ’17-’19 | With Pillion Seat & Subframe
Low stock
$239.99 USD Add to cart
-
Featured Video
Related products
SW-MOTECH Crash Bars Engine Guards for Triumph Tiger 1050 ’07-’12
Not currently available to order
-
Closeout
GIVI TN225 Crash Bars Engine Guards for Triumph Tiger 1050 ’07-’13
In stock
$191.70 USD Add to cart
-
Sale
SW-MOTECH Crash Bars Engine Guards for Select Motorcycles
Not currently available to order
-
Closeout
DanM –
I didn’t want to add more weight to my R Nine T pure but decided to install the mild steel crash bars since I’m a returning rider and anticipate dropping the bike sometime in the near future! I also wanted to have a place to mount driving lights a little further out from the centerline than on the forks. I paid attention to the reviewer who accidentally put the longer bolt in the side where the shorter bolt should have gone and damaged the engine block. With a sharpie, I wrote the number from the install instructions on all the parts (measured the bolts with calipers). I then installed “by the numbers.” It seemed silly to do all this but I was not about to take a chance on my engine block! The mild steel (black) crash bars for the R Nine T weigh 8.8 lbs (9.4 lbs for the new parts, minus 0.6 lbs removed original parts). They seem sturdy, the bike doesn’t feel noticeably heavier, and I feel more protected. I am happy with the purchase.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
ttt333 –
Be very carefully with the instruction, there are some pieces that look the same but they are different size, bit just a bit, so i did install the wrong one, (the longer bolt into the left side of the bike) and I Damage the engine housing, now the engine is spilling oil from that tread. the small one. its that little hole by the oil filter.
. at plain sight those bolts looks the same but they are not. just be carefully, because now my engine housing is broken and its going to be expensive to fix…
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Cedar Tupe –
So the longer bolt should be on left
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
ttt333 –
Be very carefully with the instruction, there are some pieces that look the same but they are different size, bit just a bit, so i did install the wrong one, (the longer bolt into the left side of the bike) and I Damage the engine housing, now the engine is spilling oil from that tread. the small one. its that little hole by the oil filter.
. at plain sight those bolts looks the same but they are not. just be carefully, because now my engine housing is broken and its going to be expensive to fix…
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Wheely –
They looked good, they seemed sturdy, they broke on the first tip over. Was backing out of a hilly parking spot and the bike began to tip. I let it down as gently as possible but it went down. The right side bar hit and sheered off at the top fastening point. They were put on by the dealership so I trust the correct bolts and shims were used according to the instructions. If that’s what happened in a parking lot I can’t imagine what would have happened in a slide.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mechanical Feline –
I looked at many crash bars for the R Nine T and these always came back to looking the best and matched the lines of the R Nine T family. SW-Motech is legendary for its products so it was obvious to want them on the bike to protect the cylinder heads. The other bars I have seen out there are either a carry over for bars one would use on a GSA or strictly done for looks and would not hold up well in the event of a crash. The SW-Motech bars are built tough, all hardware lined up perfect and installation was a breeze. The mounting hardware spacers used come silver so if you want you can paint or powder coat them black to match the frame but honestly you can’t see them. The emblems do pop off if you want that “factory” look and the shape of the bars is perfect to mount some secondary lights to. I had just installed the BMW “machined” valve covers and wanted that investment protected but not covered up by the crash bars and these deliver on both. If you want rugged protection and style that matches the R Nine T family then these are the perfect choice for your machine. 🙂
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mechanical Feline –
I looked at many crash bars for the R Nine T and these always came back to looking the best and matched the lines of the R Nine T family. SW-Motech is legendary for its products so it was obvious to want them on the bike to protect the cylinder heads. The other bars I have seen out there are either a carry over for bars one would use on a GSA or strictly done for looks and would not hold up well in the event of a crash. The SW-Motech bars are built tough, all hardware lined up perfect and installation was a breeze. The mounting hardware spacers used come silver so if you want you can paint or powder coat them black to match the frame but honestly you can’t see them. The emblems do pop off if you want that “factory” look and the shape of the bars is perfect to mount some secondary lights to. I had just installed the BMW “machined” valve covers and wanted that investment protected but not covered up by the crash bars and these deliver on both. If you want rugged protection and style that matches the R Nine T family then these are the perfect choice for your machine. 🙂
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
R9T Lady –
I bought the SW-Motech crash bars for my 2015 BMW R NineT. I also ordered some very expensive valve covers. I installed this crash bars before the valve covers have arrived. I’m ready to protect my invest! Took me less than an hour and I’m a girl! Twisted throttle had the best price I could find! Great company and very fast shipping! Thanks Twisted Throttle!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal