SW-MOTECH Crash Bars Engine Guards for Select KTM Motorcycles
- Description
- Part Numbers
- Fitment
- Resources
- Videos
- Add a review
Description
All components are protected against corrosion by sandblasting and powdercoating. High-strength frame mounting points. Black.
No cutting or welding is required for installation.
Constructed of 26.9mm outer-diameter mild steel tubing.
Part Numbers
Our part number: | SBL.04.338.10000.B |
Manufacturer part number: | SBL.04.338.10000/B |
Fitment
Resources
Videos
You may also like…
Kaoko Throttle Stabilizer Cruise Control for Motorcycle with 14.2mm ID Handlebars, KTM 1190 Adventure ’13-’14, 1190 Adventure R ’13-’14 &1290 Super Adventure ’15-’17 | Models with OEM Handguards
Low stock
$189.99 USD Add to cart
-
SW-MOTECH Quick-Lock GPS Mount Base for KTM 1190 & 1090 Adventure R
Not currently available to order
-
Closeout
Silver Crash Bar Foot Peg Folding Clamp On Mounts 0.85-1.125in Diameter Tubing
Not currently available to order
-
Closeout
DENALI Horn Mount KTM Adventure Models
In stock
$27.99 USD Add to cart
-
R&G Racing Stainless Steel Radiator Guard for Select KTM Motorcycles
Low stock
$118.99 USD Add to cart
-
SW-MOTECH Chain Guard for KTM 1090 Adventure R, 1190 Adventure, and 1290 Super Adventure / R / S / T
Not currently available to order
-
Closeout
Featured Video
Related products
SW-MOTECH Crash Bars Engine Guards for Kawasaki KLR650 ’87-’07
Not currently available to order
-
Best Seller Closeout
SW-MOTECH Crash Bars Engine Guards for Yamaha FZ1 Fazer ’06-’15
Not currently available to order
-
Closeout
SW-MOTECH Crash Bars Engine Guards for BMW K1200R, K1200R Sport, and K1300R
Not currently available to order
-
Closeout
Jeremy –
They look pretty but the design where the 2 crash bars bolt together infront of the radiator is no good. I let the bike down gently on an uphill section from a dead stop and the bars cracked where the bolts pass through the 2 bars pinching them together. The total material cross section keeping the bars bolted together is maybe a 1/4″ of material which is totally undersized for the loads and vibrations that they put up with. First time they cracked I welded it back together, it immediately cracked again.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Franky –
They look decent and feel sturdy. I feel more at ease having them in case of a tip over.
I’m not willing to test their durability in a crash though so I can’t speak for that yet haha.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Swrod –
Happy to have made my decision to get these, they bolt to and replaces the cheap KTM guards which break after a minor crash. Painted the bolts and spacers black, all is well
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Einar –
I am riding the KTM 1190 Adventure and this product is according to my expectations. You should though be aware that it doesn’t fit on your bike if you are using other skid plate then from SW-MOTECH. This is strong and easy to install.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Einar –
I am riding the KTM 1190 Adventure and this product is according to my expectations. You should though be aware that it doesn’t fit on your bike if you are using other skid plate then from SW-MOTECH. This is strong and easy to install.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
rcrosson –
I installed the crash bar on my bike just before the KTM rally in Taos, nm and turned the bike over on an uphill slow turn around. Only damage to the bike was deep scratches on the crash bar and minor scratches on the plastic handguard. Saved my paint and my gas tank. Crash bar worked as it should.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal