SW-MOTECH EVO 2.0 12-volt Electric QUICK-LOCK Top Ring Upgrade Kit for SW-MOTECH EVO Tank Bag Mounting Systems

SKU:TRE0064010500B
  • tre_00_640_10203_b_1_xl_web_1
  • tre_00_640_10203_b_1_xl_web_1
  • tre_00_640_10203_b_1_xl_web_1
  • tre_00_640_10203_b_1_xl_web_1

Description

Provide a 12 volt power supply to the inside your EVO Tank Bag with the SW-MOTECH EVO 2.0 12-volt Electric QUICK-LOCK Top Ring Upgrade Kit. Compatible with most EVO tank rings this kit is designed to replace the standard top ring that came with your tankbag to provide a quickly detachable and clean power supply to its interior. Power running to the tank ring is controlled by a switch on the main power supply cable th... read more

Product Documents

SKU:
TRE0064010500B
Categories:
, , ,
Brand:
SW-MOTECH
Weight:
1.496 lbs
Tank Bag Type:

Price

$128.95

Quantity

- +

Total

$128.95

Special order - Order now for fastest delivery

- +

Description

Provide a 12 volt power supply to the inside your EVO Tank Bag with the SW-MOTECH EVO 2.0 12-volt Electric QUICK-LOCK Top Ring Upgrade Kit. Compatible with most EVO tank rings this kit is designed to replace the standard top ring that came with your tankbag to provide a quickly detachable and clean power supply to its interior. Power running to the tank ring is controlled by a switch on the main power supply cable that detects when the bag is mounted and removes power to the tank ring mounted T-connector when the bag is removed. This means you never have to worry about unsightly dangling wires or the hassle of unplugging devices. Installation is simple a drill bit template hex key and torx bit are included to allow you to swap out your existing top ring or make a fresh install on a new bag as well as connect the SAE supplied power cable to feed your devices. A switched and fused main power supply connects directly to the battery and plugs into a T-connector that attached to your existing EVO tank ring. This T-connector allows power to pass through the ring when the bag is mounted and provides a clean look when it is is detached. Since there is a small draw on the power switch while the bag mounted we recommend removing your tank bag from your motorcycle when it will sit for long periods of time or overnight. Keep your smartphone and other gadgets powered up handy and out of sight with the EVO 2.0 12-volt electric top ring upgrade kit by SW-MOTECH.

Features:

  • Replaces standard Top Ring on SW-MOTECH EVO Tank Bags
  • Compatible with most SW-MOTECH EVO Tank Rings
  • Enables detachable and clean 12 volt power supply to inside of Tank Bag
  • Allows power to Top Ring only when Tank Bag is seated
  • 5amp maximum operating load
  • Wires directly to battery
  • Inline 5amp fuse
  • Gold plated vibration proof contacts
  • Waterproof harness connection
  • Black base with red clamps

Includes:

  • EVO 2.0 Electric Top Ring
  • Tank ring base T-connector power harness
  • Battery connection power supply cable
  • Top ring power supply cable with SAE connection
  • Mounting hardware
  • 5 aluminum mounting rings
  • Drill template
  • 8.5mm drill bit
  • T6 torx bit
  • 3mm Hex key
  • Installation instructions

Please Note: A T2 Torx bit is required to complete installation. Not included but available for purchase here.

Note the Second: To prevent the electrical contacts that would be exposed when there is no bag on the tank ring SW-MOTECH uses a magnetic latch system to deactivate power to the tank ring when no bag is present. Testing for power at the tank-ring terminals without a tankbag mounted will result in a “false negative” of no power at the ring. Instead install the tank bag and test at the terminals inside the bag. Please and thank you.

Yet one more note:  This ring uses the newer EVO 2.0 system and is NOT compabitle with the older EVO 1.0 electric tank bags.

Attention: The SW-MOTECH EVO 2.0 12-volt Electric QUICK-LOCK Top Ring supplied in this kit is compatible only with EVO 2.0 main power supply cable and T-connector supplied with the EVO 2.0 top rings. Use with the wiring harness & T-connector of previous EVO 12-volt Top Rings is not possible.

SW-MOTECH EVO 2.0 and EVO Top Ring Guide
SW-MOTECH EVO 2.0 and the previous EVO 12-volt top rings are not compatible with each other due to differences in the T-connector that mounts on the tank ring as well as the switch pickup in the top rings. Motorcycles that have the T-connector from previous generation EVO 12-volt top ring kits will have to install the new power supply cable and T-connector that is supplied with the EVO 2.0 12-volt kit.
EVO 2.0 and EVO Top Ring Differences
Use the images below to determine if your existing top ring is EVO 2.0 or EVO.
SW-MOTECH EVO 2.0 Top RingSW-MOTECH EVO 2.0 T-ConnectorSW-MOTECH EVO Top RingSW-MOTECH EVO T-Connector
EVO 2.0 Top Ring
The EVO 2.0 Top Ring has red clamps
EVO 2.0 T-Connector
The EVO 2.0 T-Connector has no visible screws
EVO Top Ring
The EVO Top Ring has black clamps
EVO T-Connector
The EVO 2.0 T-Connector has two visible screws
If you already have an SW-MOTECH EVO 12-volt Tank Bag and you wish to use it with the EVO 2.0 T-connector and power supply you will need to purchase an SW-MOTECH EVO 2.0 12-volt Top Ring Kit to retrofit the EVO tank bag.

Although SW-MOTECH EVO 2.0 12-volt Electric QUICK-LOCK Top Rings are compatible with most EVO tank rings they are not compatible with the following:

Part Numbers

Our part number: TRE0064010500B
Manufacturer Number: TRE.00.640.10500/B
GTIN13 / EAN Barcode: 4052572052907

Resources

Reviews (0)

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Register

A password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up