DrySpec Motorcycle Tool Tube Kit
Description
This DrySpec Motorcycle Tool Tube Kit attaches directly to the outside of any flat-sided sidecases and can be used to carry our MSR 30 oz. Fuel Bottle and any other gear that can fit inside of it. read more-
Brand: DrySpecQuestions? Call 1-855-255-5550 or contact our sales team
Best Seller
Frequently bought together
- Description
- Part Numbers
- Resources
- Add a review
Description
Why You Want a DrySpec Tool Tube
The DrySpec Tool Tube measures 12 inches overall when closed, as well as from mounting foot tip to mounting foot tip. The tube body measures 12 inches from the base of the tube body to the closed cap with the foot at the opposite end of the cap extending 2 inches beyond the tube.
The tube is 4 inches wide at it’s widest point with a main body diameter of 3.5 inches, and a depth of 8.5 inches. The foot at the cap end is 3 inches wide with 3 round 8mm mounting holes while the opposite foot is 2 inches wide and has 1 elongated 8mm mounting hole.
The feet provide 3/4 of an inch clearance for the main tube and 1/2 inch at the tube’s widest point.
Mounting Kit Notes: The mounting kit includes the proper size Drill Bit Hex Head Screws Sealing Washers and Large Exterior Washers as detailed in the Installation Instructions attached below. If you would like to attach the Tool Tube using an alternate method please order the optional Mounting Brackets .
Check out the totally Twisted Suzuki DL650 which is outfitted with this DrySpec component
- The upper mounting tab offers 3 mounting holes that are not illustrated in the instructions.
- There is a small hole in the Tube to equalize the pressure, and allow the cap to be removed at different air pressures/altitudes. A bit of tape can be used to cover the hole, making them watertight when required.
Part Numbers
Our part number: | DJA.67670.100 |
Manufacturer part number: | DJA.67670.100 |
Resources
You may also like…
MSR 30 oz. Motorcycle Fuel Bottle
In stock
$26.95 USD Add to cart
-
Motorcycle Accessories – DrySpec Siderack Accessory Mounting Bracket Kit
In stock
$24.99 USD Add to cart
-
Closeout
Related products
SW-MOTECH Legend Gear LA8 Leg Bag 1.25 Liter | For LA7 Holster
Not currently available to order
-
Closeout
KLIM Drift Gear Bag
Not currently available to order
$69.99 USD Choose Options
-
Closeout Sale
Givi WAIST BAG
Not currently available to order
-
Closeout Sale
peter –
Bought two to install on my bike to store tools. Wish there were an option without the mounting ears, but I just cut them off and used clamps.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Overland Moto Adventure –
install alternative on a BMW GSA with hardware parts for under $ 10.00
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Kwacker –
Only 2 small recommendations.4 fixing holes only 2 nuts and bolts supplied.Add some small latches on the outside so you can lock the lids with small padlocks.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
BillG77 –
Made a bracket and added this to my Yamaha XT250 duel sport for a little extra fuel capacity. This along with the MSR 30oz fuel can did the trick, just what I needed for this small trail street bike.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Daddy4 –
I picked up 3 of these for my DR, installed easily on my frame and cases. Minor complaint about the mounting frame bolt location and the contact with the tube lids (not the end of the world, just disappointing)
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal