DrySpec Motorcycle Tool Tube Kit

Why You Want a DrySpec Tool Tube

The DrySpec Tool Tube measures 12 inches overall when closed, as well as from mounting foot tip to mounting foot tip. The tube body measures 12 inches from the base of the tube body to the closed cap with the foot at the opposite end of the cap extending 2 inches beyond the tube.

The tube is 4 inches wide at it’s widest point with a main body diameter of 3.5 inches, and a depth of 8.5 inches. The foot at the cap end is 3 inches wide with 3 round 8mm mounting holes while the opposite foot is 2 inches wide and has 1 elongated 8mm mounting hole.

The feet provide 3/4 of an inch clearance for the main tube and 1/2 inch at the tube’s widest point.

Mounting Kit Notes: The mounting kit includes the proper size Drill Bit Hex Head Screws Sealing Washers and Large Exterior Washers as detailed in the Installation Instructions attached below. If you would like to attach the Tool Tube using an alternate method please order the optional Mounting Brackets .

Check out the totally Twisted Suzuki DL650 which is outfitted with this DrySpec component

• The upper mounting tab offers 3 mounting holes that are not illustrated in the instructions.
• There is a small hole in the Tube to equalize the pressure, and allow the cap to be removed at different air pressures/altitudes. A bit of tape can be used to cover the hole, making them watertight when required.