DrySpec Motorcycle Tool Tube Kit
Description
This DrySpec Motorcycle Tool Tube Kit attaches directly to the outside of any flat-sided sidecases and can be used to carry our MSR 30 oz. Fuel Bottle and any other gear that can fit inside of it. read more
-
Product Documents
Installation Instructions
Questions? Call 1-855-255-5550 or contact our sales team
Frequently bought together
- Description
- Part Numbers
- Resources
- Add a review
Description
Why You Want a DrySpec Tool Tube
The DrySpec Tool Tube measures 12 inches overall when closed, as well as from mounting foot tip to mounting foot tip. The tube body measures 12 inches from the base of the tube body to the closed cap with the foot at the opposite end of the cap extending 2 inches beyond the tube.
The tube is 4 inches wide at it’s widest point with a main body diameter of 3.5 inches, and a depth of 8.5 inches. The foot at the cap end is 3 inches wide with 3 round 8mm mounting holes while the opposite foot is 2 inches wide and has 1 elongated 8mm mounting hole.
The feet provide 3/4 of an inch clearance for the main tube and 1/2 inch at the tube’s widest point.
Mounting Kit Notes: The mounting kit includes the proper size Drill Bit Hex Head Screws Sealing Washers and Large Exterior Washers as detailed in the Installation Instructions attached below. If you would like to attach the Tool Tube using an alternate method please order the optional Mounting Brackets .
Check out the totally Twisted Suzuki DL650 which is outfitted with this DrySpec component
- The upper mounting tab offers 3 mounting holes that are not illustrated in the instructions.
- There is a small hole in the Tube to equalize the pressure, and allow the cap to be removed at different air pressures/altitudes. A bit of tape can be used to cover the hole, making them watertight when required.
Part Numbers
| Our part number: | DJA.67670.100 |
| Manufacturer part number: | DJA.67670.100 |
Resources
Product Documents
Installation Instructions
You may also like…
MSR 30 oz. Motorcycle Fuel Bottle
In stock - Usually ships within 24 hours
$26.95 USD Add to cart
Camping & TravelFuel Bottles & Mounts-
Motorcycle Accessories – DrySpec Siderack Accessory Mounting Bracket Kit
In stock - Usually ships within 24 hours
$24.99 USD Add to cart
Luggage Rack Accessories-
Related products
Givi SPORT-T LEG BAG | 3L
Sale!Low stock - usually ships in 10-20 days - order soon
$60.30 USD Add to cart
Small Item Storage-
Sale
Givi CORIUM LEG BAG | 3L
Sale!Low stock - usually ships in 10-20 days - order soon
$56.70 USD Add to cart
Small Item Storage-
Sale
Givi T519L Smart Phone Waterproof Sleeve | Medium
Sale!Low stock - usually ships in 10-20 days - order soon
$27.00 USD Add to cart
Small Item Storage-
Sale
Avery –
Piece of mind knowing a liter of fuel might give me a 10 miles range just in case I get stuck somewhere
(0) (0) Watch Unwatch
ChrisG –
It’s made by ‘dry spec’, the threaded lid has a rubber seal but just below the top mount there is a small hole? Otherwise it’s exactly as you see on the product page.
(0) (0) Watch Unwatch
peter –
Bought two to install on my bike to store tools. Wish there were an option without the mounting ears, but I just cut them off and used clamps.
(0) (0) Watch Unwatch
jared greenstone –
I use this particular storage unit on my 2010 Vstrom with OEM luggage…sits nicely along the inside of the rack on the left side of the bike…slightly modified my rack (one small hole drilled) to line up with the centre hole on the unit so that it mounted slightly at an upwards angle….great for lube and a rack and perhaps a few tools.
(0) (0) Watch Unwatch
kaber5150 –
I got one of these about a year ago and I’m very pleased with it. I mounted it with a set of framing braces from Ace Hardware to my side case rack. The extra fuel actually saved a friends bacon on a long trip in June, he ran out of gas two miles short of town.
(0) (0) Watch Unwatch
Wayne –
A decent enough container but not impressed with the vent hole.
(0) (0) Watch Unwatch