DrySpec Stash Box Lockable License Plate Storage Box
Description
The DrySpec STASH BOX is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e. low cost concealed mounting location vehicle styling is unaffected and easy accessibility. read more-
Brand: DrySpecQuestions? Call 1-855-255-5550 or contact our sales team
Best Seller
- Description
- Part Numbers
- Resources
- Videos
- Add a review
Description
Sized to work with all standard size license plates as well as the current Wisconsin and Ohio cycle plates.
External Dimensions: 7″ x 4″ x 1; plus 1″ on the width for the lock.
Internal Storage Dimensions: 6.3″ x 3.5″ x 0.8″
Made from molded polypropylene. Includes all mounting hardware retention pouch for paper documents foam insert lock and two keys.
Assembly & Mounting Instructions:
- Assemble the lock into the Stash Box using thread locking compound or RTV sealant on threads.
- Press the o-ring seal into the groove in the bottom side of the Stash Boxs interior. The ends should terminate along the edge closest to the hinge.
- Install the retention pouch to an interior surface of the Stash Box. Use this to secure paper documents.
- Determine the desired mounting orientation that allows the box to be opened easily. Lock up. Lock down and lock sideways are acceptable. Do not mount the Stash Box flat i.e. license plate facing towards the sky as this may allow water entry under some conditions.
- Drill mounting holes in the box as required and install with appropriate fasteners. (See below.)
The DrySpec license plate keyed Stash Box |
Motorcycle Installation Instructions:
- Remove the license plate from the cycle.
- Using a 9/32″ or 17/64″ drill bit drill holes at the pilot marks (seen on the inside of the Stash Box) that will allow the chosen mounting orientation.
- Mount the Stash Box using the included hardware (2 bolts & locknuts).
- Install the license plate to the face of the Stash Box using the included hardware (4 screws).
Part Numbers
Our part number: | TT.SBX.10000 |
Manufacturer part number: | 100010 |
Resources
Videos
You may also like…
R&G Racing Helmet Visor Protection – R&G Visor Pouch
Low stock
$22.99 USD Add to cart
-
DrySpec Motorcycle Tool Tube Kit
In stock
$16.99 USD Add to cart
-
Best Seller
Helmet Guardian for Single Bike | Black
Not currently available to order
-
Closeout Sale
Featured Video
Related products
SW-MOTECH Legend Gear LA8 Leg Bag 1.25 Liter | For LA7 Holster
Not currently available to order
-
Closeout
GIVI Handlebar Pouch Waist Pack
Available to backorder
$91.80 USD Add to cart
-
Sale
DrySpec Large Tool Tube Mounting Kit
In stock
$27.99 USD Add to cart
-
JasonC –
Awesome place to keep my registration locked away and not having to worry about leaving home without it
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mikeyp –
Easy install. Very inconspicuous. Nobody ever notices it or ask questions
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Lee –
I had this on BMW’s, HD, now on a Piaggio. Stores registration, Insurance, & $$$.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dogbertx –
Fast shipping, good company response.
Perfect add on to any child that doesn’t have lockable storage.
Safe place to put insurance papers.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
connie –
I bought this for my sons motorcycle. It has no luggage or fairing. Perfect place to store registration and insurance papers. Only drawl back is the tag light doesn’t light the plate with the additional thickness of the product.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Clint68 –
Just a cool little product that is perfect for stashing your insurance and registration.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
larry –
now i don’t have remove my seat on my cb500x honda to get to reg. and insurance.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
SDM –
Used this handy little box to stash a CO2 inflator and (3) 20 gram cartridges. Enough CO2 for my KLR650 tires. Box is basically free if you buy it before having to pay for a taxi ride home. ( I did not ).
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
RCinAL –
This is one of those handy inventions that will make you slap your forehead and wonder why you didn’t think of it. It is easy to install too and works great. It came with all the hardware. No bike should be without one. Never get caught without your “papers” again in the great American police state. You can also stash other things – an emergency check, a little cash, or whatever. No one will ever think to look there.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Sportster Chick –
Great item. Wish it was metal but all the ones I’ve seen were 400 dollars. I can’t justify paying that because I would never be locking up anything of that value in it. This works great so your reg and insurance is already secure on the bike. No more worring about forgetting it. I did alter the box a bit hopping to dress it up a bit. I wanted my plates more secure than using the small screws that just ankered into the plastic. I drilled all the way through and used two different bolts that require special wrenches. I used locking washers on inside and waterproofed the bolts with clear flex seal caulk. I used locking washers on the box to plate frame and repeated the seal. I cut and added side view mirrors replacement to add a chrome look to the back of the flat back box. I recommend using Twisted Throttle they were awesome. Thank you Twisted Throttle!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Sportster Chick –
Great item. Wish it was metal but all the ones I’ve seen were 400 dollars. I can’t justify paying that because I would never be locking up anything of that value in it. This works great so your reg and insurance is already secure on the bike. No more worring about forgetting it. I did alter the box a bit hopping to dress it up a bit. I wanted my plates more secure than using the small screws that just ankered into the plastic. I drilled all the way through and used two different bolts that require special wrenches. I used locking washers on inside and waterproofed the bolts with clear flex seal caulk. I used locking washers on the box to plate frame and repeated the seal. I cut and added side view mirrors replacement to add a chrome look to the back of the flat back box. I recommend using Twisted Throttle they were awesome. Thank you Twisted Throttle!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Superfunkomatic –
I got this stash box a few weeks ago and I love it. What a great idea. It’s slim and nearly invisible. Sometimes I don’t even noticed it there. I keep my important documents like my registration inside it. It’s a lot easier to access than lifting up my seat.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
cliffordmusante –
I’ve used this stash box on two of my BMW GS Adventure bikes and I find that it provides me with the perfect place to stash my motorcycle paperwork (registration and insurance).
You should know that this box is a general purpose box, not designed to fit any particular motorcycle, so you’ll need to drill holes, cut plastic, and think about how you’re going to install it. But, I’ve been able to get it to work on both bikes, and after some clever fabrication work, it fits perfectly.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
1pfr2go –
I have three of these on various bikes ranging from a ’78 Honda CB550K to a ’14 Triumph Scrambler. I wrap my registration and insurance card inside a baggie and have never had an issue w/wet or soggy paperwork, so I can”t speak for the effectiveness of the o-ring seal. Installation is easy and the service from Twisted Throttle is always excellent. A great product at a good price.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Bumper –
I ride a HD Sportster 1200 and there isn’t any storage under the seat like on some bikes so I didn’t have anyplace to keep my registrtion. With this license plate storage box, it’s the perfect place to carry it. Completely happy with this purchase.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Bumper –
I ride a HD Sportster 1200 and there isn’t any storage under the seat like on some bikes so I didn’t have anyplace to keep my registrtion. With this license plate storage box, it’s the perfect place to carry it. Completely happy with this purchase.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
S10Rider –
Fits great on a 2013 super tenere! View the youtube video for installation instructions.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
swissutah –
Time will tell, I need to go out and ride to see how it holds up….
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dale –
I have two of these for a couple of my bikes to keep insurance, registration, etc. These are very simple but are perfect for what they are for. These are a breeze to install. The quality is high and they are rugged. One is on my KLR650 which I do some off road riding with and these things take the bumps and bruises.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
wylzc –
does the job it claims to do — stores documents, doesn’t leak, stays secure. No complaints.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
TomHal –
I have bought 5-6 of these over the years. All for different bikes of varying yrs 60’s-present. I haven’t had any issues with fitment.
I do not have to worry about my registration, emergency cash or spare key. One less thing to worry about carrying. The box blends in with the bike.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
TerriRider –
Because it fits exactly as your license plate it will mount to any motorcycle. It’s so well hidden that even I don’t notice it and is a great place for small items such as a photocopy of the ownership, a tube patch kit or a dash light bulb for example. A++
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
TerriRider –
Because it fits exactly as your license plate it will mount to any motorcycle. It’s so well hidden that even I don’t notice it and is a great place for small items such as a photocopy of the ownership, a tube patch kit or a dash light bulb for example. A++
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jb8712 –
Great product. Very convenient. Plan on getting more for all my bikes
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal