SW-MOTECH Hard-Bolt EVO Side Carrier for Honda XR650L
This product is no longer available.
Description
The SW-MOTECH Hard-Bolt EVO Side Carrier to fit Many Side Case Types for Honda XR650L is the next generation of luggage carriers. These black powder-coated tubular steel racks are compatible with luggage cases from TraX ALU-BOX cases Aero ABS Sidecase system Hepco & Becker Krauser and more as well as GIVI (Monokey system). Luggage-specific adapter kits are sold separately. read more
-
Product Documents
Attaching to bike
Questions? Call 1-855-255-5550 or contact our sales team
Closeout
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
Working with Dakar Rally Rider Patrick Trahan Twisted throttle has designed a hard bolted side carrier system to compliment the Steel-Rack toprack also designed for his trip. Patrick then tested these carriers over 3 000 miles of North & Central Africa.
Please Note: It is advised not to exceed 22 – 23 lbs. including case and mounting hardware to acheive the best results.
Required luggage-specific adapter kits are sold separately. The hard bolted racks are made of flat steel which presents the narrowest possible lateral profile. Bolt-on installation — no cutting or welding of motorcycle frame or bodywork is necessary. Racks are designed to work with original equipment manufacturer components — fender exhaust etc.
Note: Also compatible with Micatech V2 Cases
SW-MOTECH EVO Side Carrier Luggage Guide
SW-MOTECH EVO Side Carriers are ingeniously designed to accept available mounting adapters for a wide range of touring luggage. Here is a partial list of compatible luggage and the adapters required for each.
SW-MOTECH
TRAX ADV 37L Silver
Left Side TRAX ADV 37L Case
Right Side TRAX ADV 37L Case
37L capacity each
Adapter for TRAX
SW-MOTECH
TRAX ADV 45L Silver
Left Side TRAX ADV 45L Case
Right Side TRAX ADV 45L Case
45L capacity each
Adapter for TRAX
SW-MOTECH
TRAX ADV 37L BlackLeft Side TRAX ADV 37L Case
Right Side TRAX ADV 37L Case
37L capacity each
Adapter for TRAX
SW-MOTECH
TRAX ADV 45L BlackLeft Side TRAX ADV 45L Case
Right Side TRAX ADV 45L Case
45L capacity each
Adapter for TRAX
SW-MOTECH
TRAX ION 37L Silver
Left Side TRAX ION 37L Case
Right Side TRAX ION 37L Case
37L capacity each
Adapter for TRAX
SW-MOTECH
TRAX ION 45L SilverLeft Side TRAX ION 45L Case
Right Side TRAX ION 45L Case 45L capacity each
Adapter for TRAX
SW-MOTECH
TRAX ION 37L BlackLeft Side TRAX ION 37L Case
Right Side TRAX ION 37L Case
37L capacity each
Adapter for TRAX
SW-MOTECH
TRAX ION 45L BlackLeft Side TRAX ION 45L Case
Right Side TRAX ION 45L Case
45L capacity each
Adapter for TRAX
SW-MOTECH
AERO ABS 25L Black
AERO ABS 25L Case Set
25L capacity each
Adapter for AERO
SW-MOTECH
SysBag 30 Saddlebag SetSysBag 30 Saddlebag Kit
30L capacity each
Adapters Included in Kit
DrySpec
H35 A-Lock 35L BlackH35 A-Lock 35L Case Set
35L capacity each
Adapter for A-Lock
DrySpec
H35 A-Lock 35L SilverH35 A-Lock 35L Case Set
35L capacity each
Adapter for A-Lock
GIVI
Trekker Monokey 33 Silver
Trekker Monokey 33L Case Set
33L capacity each
Adapter for Trekker Monokey
GIVI
Trekker Monokey 46 Silver
Trekker Monokey 46L Case Set
46L capacity each
Adapter for Trekker Monokey
GIVI
Trekker Monokey 33 BlackTrekker Monokey 33L Case Set
33L capacity each
Adapter for Trekker Monokey
GIVI
Trekker Monokey 46 Black
Trekker Monokey 46L Case Set
46L capacity each
Adapter for Trekker Monokey
GIVI
E360 Monokey 40L Case
E360 40L Side or Top Case
40L capacity each
Adapter for Monokey
GIVI
E22 Monokey 22L Set
E22 Monokey 22L Case Set
22L capacity each
Adapter for Monokey
GIVI
Trekker Dolomiti 36 Silver
Trekker Dolomiti Retro Fit Set
36L capacity each
Adapter for Retro Fit
GIVI
Trekker Dolomiti 36 Black
Trekker Dolomiti Retro Fit Set
36L capacity each
Adapter for Retro Fit
Part Numbers
| Our part number: | KFT.01.826.20000.B |
| Manufacturer part number: | KFT.84.826.20000/B |
Fitment
Resources
Product Documents
You may also like…
CycleSpec Rear Brake Master Cylinder Guard for Kawasaki KLR650 ’86-’20 & Honda XR650L
Not currently available to order
Master Cylinder & Reservoir Guards-
Closeout
Related products
SW-MOTECH Alu-Rack for Honda 919 / CB900 Hornet
Not currently available to order
Top Luggage Racks-
Closeout
SW-MOTECH Alu-Rack for Yamaha FZ1 Fazer ’00-’04
Not currently available to order
Top Luggage Racks-
Closeout
GIVI PL188 Tubular Sidecase Racks for Select BMW Motorcycles
Sale!In stock - usually ships in 10-20 days
$174.60 USD Add to cart
Side Luggage Racks-
Sale
Desperado –
Will this Rack also fit on a XR600R?I have mount a subframe.
(0) (0) Watch Unwatch
Mark –
I just spent four hours installing these racks when it shouldn’t have taken an hour. Mounting brackets did not come close to lining up with holes and instructions are poorly written, poorly illustrated, and possibly incorrect. Had to bend parts of the racks to make them fit – and this is on a new XR650L with 700 miles and no damage. I can’t figure out how to replace the left side cover without removing the rack again to get it back on, and last, the left side turn signal will not mount on the new bracket because the wires are way too short. I’ll figure that one out tomorrow.
All that said, the racks appear to be rigid and well made and I hope worth the effort to get them on.
(0) (0) Watch Unwatch
Jim Wilson –
Possibly they sent the wrong racks?
(0) (0)
Wildoube –
Installation was simple , all the bits are good quality , and the bags I bought fit these carriers perfectly
(0) (0) Watch Unwatch
abowie3110 –
I installed these on my new 2017 Honda XR650L. This is the second time I’ve purchased and reviewed this product. My first set was installed on my 2012 XR650L. I sold my 2012 but missed the bike so much I bought another one. These side racks are absolutely THE BEST. They are very versatile and can be used with many different brands of luggage as well as fuel cells such as Rotopax. They are easy to install and are direct bolt on NO DRILLING required VERY RUGGED quality product I highly recommend!!
(0) (0) Watch Unwatch
douglas –
I would have given 5 stars, but there should be mention of having to remove the seat so that you can access and reroute the turn signal wiring to meet the elongated mounting point, plus you do need to drill out the hole in the turn signal extension bar so that the anti-rotation pin can fit.
(0) (0) Watch Unwatch
Abowie –
Installed on my 2012 XR650L. VERY RUGGED !! Fit the bike perfectly. I am using Givi E21 Saddlebags, and a SW-Motech Rear bag which is strapped down on top of the SW-Motech Rear rack. I also installed the SW-Motech sub-frame support arms. I am very happy with all the above mentioned products and the service and support from Twisted Throttle is the BEST !!
(0) (0) Watch Unwatch
Motoviking –
I am pretty sure this side carrier kit will be handle a dump on the side and not even scratch the powder coating. This is built with ruggedness in mind. I am also fairly sure that the design also reinforces the already weak subframe. I added the SW Toprack and I think it all ties in nicely. I plan to install Rotopaxs on them.
(0) (0) Watch Unwatch
Wrangler –
Very easy to install and the rack are strong and fit very well on my xr 650 L.!!
(0) (0) Watch Unwatch
Don –
I bought these SW- Motech racks to mount my new Mosko Moto Soft Panniers.
The racks are rock solid and should help support the notoriously weak rear frame of the XR650L. The Mosko Moto 35 liter soft panniers fit very well on this rack, they too are rock solid!
(0) (0) Watch Unwatch
earltintman2001 –
At first I thought 22lb ship weight was a little excessive. After installing it I realized how sturdy this unit was. This is much more solid than the Givi unit that was on the bmw f650gs. The left side went together without a hitch.The right side took some muscle and persuasion by way of a dead blow hammer to get the holes to line up. I cant really blame motech because the welds in the honda frame were different distances apart from one side to the other. I wish the paint was a little bit harder to scratch.
(0) (0) Watch Unwatch