SW-MOTECH Quick-Lock EVO Side Carriers for Select BMW Motorcycles
This product is no longer available.
Description
The Quick-Lock EVO carrier is next generation of luggage carrier by SW-MOTECH. Same great Quick-Lock design with a more robust tubular steel rack that has an even more narrow profile than the original sidecarrier! The racks can be removed from the bike in less than 30 seconds without special tools by opening 3 quick-release fasteners on each side. read more-
Brand: SW-MOTECHQuestions? Call 1-855-255-5550 or contact our sales team
Closeout
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
These black powder-coated tubular steel racks are compatible with luggage cases from GIVI (Monokey system) TraX ALU-BOX Pelican Micatech V2 Kappa Shad Hepco-Becker Krauser and more. Luggage-specific adapter kits are sold separately.
When the racks are removed only 3 small mounting tabs remain visible on either side of the bike. These mounting tabs are almost invisible preserving the original visual appearance and size of your motorcycle. Required luggage-specific adapter kits are sold separately. In addition optional key locks (sold separately) are available to lock the racks to the bike with the key unlocking a pair of special quick-release fasteners which secure the racks on each side.
Fits:
- BMWÂ F650GS 2000-2007
- BMW F650 GS Dakar 2000-2007
- BMW G650GS 2011-2015
- BMW G650GS Sertao 2012-2015
Note:Â Installation of these sideracks on bikes with US license plate brackets requires the plate bracket reflectors to be bent outwards slightly.
SW-MOTECH Quick-Lock EVO Side Carriers
Richard Reynolds an F650GS/Dakar owner wrote to us and said:
“Received the SW-MOTECH sideracks today; took all of 30 minutes to install. Nice strong unit.”
Dave Terry (“dbtcycle” of F650.com) had this to say about the SW-MOTECH racks and Givi E360N cases:
“For the F650GS there is one rear mounting bracket that is installed under the license plate holder. Then on the left and right sides there are mounting tabs that fit pre-exisiting bolt holes beneath the muffler and the catalytic converter can. A third mounting point is through the removable plastic discs above the muffler and can. The installation instructions are in German but the diagram is clear enough it wasn’t necessary to read anything. Installation of all the brackets took about an hour. All mounting bolts got a dab of “Blue” threadlock.
The main advantage of the SW-Motech racks is that they can be quickly removed from the permanent mounting tabs via quick-connect cam-like fasteners. So far the Quick-Lock fasteners have been very secure over about 2 000 miles on pavement. The racks are well-built flat steel and align perfectly with the mounting tabs. There’s an optional keyed lock that can be installed on each rack that I didn’t get (but may be nice). If I’m leaving the bike somewhere with luggage installed I simply run a cable through each bag and through one of the grab handles and lock it so the bags can’t be removed without destroying them.
The Givi E360 bags are just wide enough to fit my Arai Quantum full face but fit a surprising amount of gear. The whole set up has been great for commuting and for two solo camping trips so far. The only downside is that with the E360 bags the set-up sticks out quite a bit (see the rear view photo in the above link). Other than that I’ve been very pleased.
The height of the Givi bags is great – just right for my tent and dry bag to not drape over onto the mufflers. The other thing the SW-Motech racks do is give you good anchor points for bungee cords.
I think the system works great. I took a 1 500 backroads solo tour this past October and the sideracks and givi bags were flawless. In my humble opinion the combination of the SW-Motech racks with the Givi bags is the best value out there for your average rider (commuting weekend riding moto camping and the occassional longer tour).”
Puffy P of F650.com wrote:
My bike is an ’01 BMW F650GSA. I have Hepco & Becker Gobi side bags attached to SW-Motech quick disconect and locking saddlebag mounts. The top case is a Givi E52 with integrated brake lights and gel back pad along with a Givi F639 mount for the F650GS. It’s a great setup and my girlfriend thinks it’s very comfortable when she rides with me. The top case can hold two full face helmets easily. I do not have an additional pizza box style top case. When the Gobis are removed the SW Motech mounts can be unlocked and removed as well. When the mounts are removed (which takes less than a minute for both sides) You probably would not even notice the attachment points. I did plenty of research before buying the luggage and I am very happy with my choice.
Part Numbers
Our part number: | KFT.07.094.20000 |
Manufacturer part number: | KFT.07.094.20000/B |
Fitment
Resources
You may also like…
SW-MOTECH Aluminum Engine Guard Skid Plate | Select BMW Motorcycles
Not currently available to order
-
Closeout
Related products
SW-MOTECH ALU-RACK Adapter to Fit Monokey Top Cases
Not currently available to order
-
Closeout
SW-MOTECH Quick-Lock Adapter for Hepco & Becker Plastic Sidecases
In stock
$36.95 USD Add to cart
-
Closeout
Givi E215 Topcase Rack to fit Givi Monokey Topcases for Honda ST1300 Pan European ’02-’13
In stock
$89.10 USD Add to cart
-
Sale
0 reviews with a 1-star rating
There are no reviews with a 1-star rating yet