SW-MOTECH Quick-Lock EVO Side Carrier for Honda NC700X / S and NC750X / S
This product is no longer available.
Description
The Quick-Lock EVO carrier is next generation of luggage carrier by SW-MOTECH. Same great Quick-Lock design with a more robust tubular steel rack that has an even more narrow profile than the original sidecarrier! The racks can be removed from the bike in less than 30 seconds without special tools by opening 3-4 quick-release fasteners on each side.
read more Brand: SW-MOTECHQuestions? Call 1-855-255-5550 or contact our sales team
Closeout
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
The black powder-coated tubular steel racks are compatible with luggage cases from GIVI (Monokey system) TraX ALU-BOX Pelican Micatech Kappa Shad Hepco-Becker Krauser and more. Luggage-specific adapter kits are sold separately.
When the racks are removed only 3-4 small mounting tabs remain visible on either side of the bike. These mounting tabs are almost invisible preserving the original visual appearance and size of your motorcycle. Required luggage-specific adapter kits are sold separately. In addition optional key locks are available to lock the racks to the bike with the key unlocking a pair of special quick-release fasteners which secure the racks on each side.
- Removable side carrier to use with almost every established motorcycle case
- To mount and demount within seconds at barely visible fixing lugs due to quick fasteners
- Adaptable to TraX Givi/Kappa Krauser Hepco & Becker and Shad cases by seperately available SW-MOTECH Side Carrier Adapter Kits
- Made of oval tube carefully constructed position close to the motorcycle
- Highly functional and firm
- Black powder-coated surface
Included:
- QUICK-LOCK EVO Side Carrier
- Mounting material
- Mounting instructions
Features:
- We advise the anti-theft protection optional key locks
Fits:
- Honda NC700X/S ’11-’15
- Honda NC750X/S ’14-’15
Note: For bikes with original Honda luggage & luggage specific grab rails 4 M8x35mm bolts and 4 5mm spacers will be required raise the grab rails to provide necessary clearance.
Part Numbers
Our part number: | KFT.01.129.20000.B |
Manufacturer part number: | KFT.01.129.20000/B |
Fitment
Resources
You may also like…
DrySpec Universal Small Case Bolt-on Kit for Select Sidecarriers
In stock
$58.99 USD Add to cart
Closeout
GIVI Trekker Monokey Luggage Case | Silver/Black (ea) | 33 Liters/Case
In stock
$360.00 USD Add to cart
Sale
Related products
SW-MOTECH Top Rack Yamaha XT600E
Not currently available to order
Closeout
GIVI PL257 Tubular Sidecase Racks for Honda VFR800 Interceptor ’98-’01
Available to backorder
$154.80 USD Add to cart
Sale
GIVI PL528 Tubular Sidecase Racks for Suzuki DL1000 V-Strom ’02-’12
In stock
$213.30 USD Add to cart
Sale
Grampyto3 –
Very impressed with the design and finish of these sidecarriers. I used them to ad some pelican hard cases to my bike. The only issue I had was the rear cross girder seemed to be a little short, because it had to fit over the existing metal license plate bracket. So it needed some tweeking to get it to align stress free. I do have the sw-motech steel rear rack attached and used the upper mounting points from this rack. (so maybe that had something to do with it). I have installed other sw-motech products and have never been disappointed. A bit on the pricey side for the nc700x for some reason, but would still recommend. Hope this helps and see you on the trail.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Hummus –
Easy install solid rack looks good , still waiting for my kappa garda cases
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
CommuterDan –
This went on the bike very easy (20 minutes) they are very sturdy and fit with the SW-MOTECH rear rack GIVI TREKKER cases snap on and fit great
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal