Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
SW-MOTECH Sub-Frame Support Arms for Honda XR650L
FRM.01.824.10000
This product is no longer available.
View All SW-MOTECHView All LuggageView All Luggage Rack AccessoriesView All Luggage Racks & Accessories
Description
These support arms are constructed of 1/4" steel flat stock to offer additional support for the notoriously soft XR650L sub-frame. Bolt-on strength. No cutting drilling or welding required to install these arms. These support arms are designed to work with the STOCK OEM HONDA EXHAUST ONLY. There are no guaranties that these arms will work with an after market exhaust. read more
-
Brand: SW-MOTECHQuestions? Call 1-855-255-5550 or contact our sales team
Closeout
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
Designed to increase the strength of the rear sub-frame of the Honda XR650L for use with side cases and top cases.
Part Numbers
| Our part number: | FRM.01.824.10000 |
| Manufacturer part number: | FRM.84.824.10000/S |
Fitment
Resources
You may also like…
Mefo MX Master Dual-Sport Front 21 inch Size 90/90-21 or 3.00-21 10% Street / 90% Dirt 54S Tube Type Bias Ply Tire
Not currently available to order
-
Closeout Sale
Related products
GIVI PL188 Tubular Sidecase Racks for Select BMW Motorcycles
In stock
$174.60 USD Add to cart
-
Sale
SW-MOTECH Top Rack Yamaha XT600E
Not currently available to order
-
Closeout
SW-MOTECH ALU-RACK Adapter to Fit Monokey Top Cases
Not currently available to order
-
Closeout
abowie3110 –
Installed these on my new 2017 Honda XR650L. This is the second time I’ve purchased these support arms. The previous set was installed on my 2012 XR650L. I sold my 2012 but missed it so much I bought another XR650L. This is a very easy install and a MUST have if you plan on adding luggage / gear onto your XR650L. I highly recommend this product and Twisted Throttle is the BEST !!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
The yyyn –
I did have to grind down the edges to fit my bike but my bike was used so that may be why. It was a simple fix. It looks good and I like the extra strength.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
TinyL –
Just purchased a new XR650L and was really wanting to strengthen my rear subframe. I read all about how these were for the stock exhaust only, but I ordered a set to see if I could make it work. My friend with a well equipped shop mocked it up in wood, then made a real simple bracket from some forged 1/8 in aluminum plate and the rear end is strong as an OX now! You could as easily use plate steel. At first I just made one for the exhaust side, but the decided to make it a matched pair. There are no issues with clearance anywhere now. I am sure any local machine shop could make a pair of these in under an hour.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Davexr650l –
When I purchased these, I knew they only were made for stock exhaust on the xr650l. I have the DG type O exhaust, and weigh 343lbs before gear so I needed support, it was not hard to figure out and to mod the one exhaust side support, I used a 4″ grinder and just ground out a upside down “U” to fit around the pipe, this was the only thing needed to fit with an aftermarket exhaust. It is still very strong, did not lose strength by me notching it out, I tried bending it in all ways, but it is still a very solid piece of steel. I highly recommend them, not the little gusset supports because the gussets just crack right passed the welds, the heat from welds weakin the frame
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Joyfylspirit –
So happy I bought these support arms! Perfect fit and finish!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dude –
Excellent quality item, fast delivery. One satisfied dude here from Canada and will always look to Twisted throttle for future upgrades for my XR650L.
Thank you
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal