Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
SW-MOTECH Quick-Release Soft Luggage Carrier for Alu-Rack Toprack
This product is no longer available.
Description
Removable quick-release adapter plate for mounting soft luggage or enlarging the surface area of the SW-MOTECH Alu-Rack. read more
-
Brand: SW-MOTECHQuestions? Call 1-855-255-5550 or contact our sales team
Best Seller Closeout
- Description
- Part Numbers
- Resources
- Videos
- Add a review
Description
The suggested accessory is the RackPackII which was designed for use with this item. The top plate can be removed from the Alu-Rack by turning each of three quarter-turn Quick-Lock fasteners 90 degrees providing a cleaner look to the motorcycle when the topcase and topplate are not in use.
SW-MOTECH QUICK-LOCK Luggage Rack Extension
- To attach soft luggage to a SW-MOTECH ALU-RACK
- Mounting or removal within seconds due to quick fasteners
- Excellent stability with the 3-point Quick lock system
Dimensions:
- Depth: 10″
- Front (closest to rider): 15 1/2″ flat surface area / 17″ overall width
- Rear: (back of motorcycle) 13″ flat surface area / 15″ overall width
Included:
- Luggage rack extension
- Mounting hardware
- Mounting instructions
Characteristics:
- Lots of possibilities to fix lashing straps to different points on the rack
- Excellent function especially with BAGS-CONNECTION RackPack II
SW-MOTECH Alu-Rack with BAGS-CONNECTION RackPack II:
Equivalent to part GPT.00.152.43000/B & GPT.00.152.43001/B
Part Numbers
| Our part number: | GPT.00.152.430 |
| Manufacturer part number: | GPT.00.152.43001/B |
Resources
Videos
You may also like…
GIVI EX1SRA Expandable Soft Luggage Carrier for Select Products
Available to backorder
$169.20 USD Add to cart
-
Sale
Featured Video
Related products
SW-MOTECH Quick-Lock EVO Side Carriers for Suzuki DL1000 V-Strom
Not currently available to order
-
Closeout
GIVI PL257 Tubular Sidecase Racks for Honda VFR800 Interceptor ’98-’01
Low stock
$154.80 USD Add to cart
-
Sale
SW-MOTECH Alu-Rack for Honda 599 and CB600F Hornet
Not currently available to order
-
Closeout
Coyote Chris –
I have used this for three years on my NT700v and while there is no alu-rack for my new FJR, with the hardware supplied, I adapted it to a Givi rack. This is the best rack for those of us that like to use duffle type bags on the luggage rack. Pleanty of places to attach hi-tech bungies, etc. And the rack comes off and on easily. I would like it a little thicker material but I have never bent it.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
DougSA –
I installed the Quick Release Carrier on the SW Motech Alu Rack on my 2014 Ninja 650. The Alu Rack has 3 holes which match up with the 3 holes on the carrier for easy attachment. However, I discarded the quick release hardware because the self-tapping screws for the anchor brackets were far too small (about 2mm!?)for this application and furthermore some of them failed to self tap. The quick-release hardware is basically junk. In place of this, I just attached the carrier to the rack with three bolts and nuts. I had to enlarge the 3 holes on the carrier for the larger bolts that I used. I would have given it a 5 if it were not for the poor quick-release attachment hardware. This is a nice carrier which will accommodate my Cortech 2.0 24 liter bag as well as other duffle and roll type bags.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Paladin –
While installing this rack I found that the holes in the quick release brackets did not line up with the pre-drilled holes in the original alu-rack. The hole spacing was about 1.5 mm too wide requiring filing the bracket holes to fit. Then, one of the the fine thread 3mm screws supplied broke off in the blind hole on the alu-rack. I ended up drilling all four holes out to 3/32″ and tapped them with a 6-32 tap and installed 1/4″ long 6-32 screws to attach the brackets to the alu-rack. Once completed the supplied hardware holds the quick release carrier securely to the alu-rack. The luggage carrier is made from thin aluminum material so be careful not to overload it with luggage to prevent it from bending.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal