Helmet Guardian for Single Bike | Black
This product is no longer available.
Description
Readily installed on either the upper or lower license plate bolts this is the perfect accessory for securing your helmet to your bike! read more Brand: Helmet GuardianQuestions? Call 1-855-255-5550 or contact our sales team
Closeout Sale
- Description
- Part Numbers
- Resources
- Add a review
Description
The Helmet Guardian consists of two high quality spring loaded helmet locks attached to a steel plate that is predrilled with slots ready to attach to most US and Canadian license plates.
For the keyed alike Helmet Guardian click here.
Comes in powder-coated black.
Overall width: 11″ (279.4mm)
Lock height: 2.5″(63.5mm)
Fits standard North American motorcycle license plate mounts. Not for use with European or United Kingdom motorcycle license plates.
Part Numbers
Our part number: | STA.HG.B |
Resources
You may also like…
R&G Racing Helmet Visor Protection – R&G Visor Pouch
Low stock
$22.99 USD Add to cart
DrySpec Stash Box Lockable License Plate Storage Box
In stock
$36.99 USD Add to cart
Best Seller
Doubletake Enduro Mirror – 1in RAM Compatible Ball (sold individually)
Not currently available to order
Closeout Sale
Related products
GIVI 3-Case Lock Set with 6 Matched Keys | Z228
In stock
$39.60 USD Add to cart
Sale
SW-MOTECH Alu-Rack for Honda 599 and CB600F Hornet
Not currently available to order
Closeout
SW-MOTECH EVO Side Carriers for BMW R1100GS, R1150GS, and R1150GS Adventure
Not currently available to order
Closeout
CWOBOSN4 –
The “K-brand” didn’t fit so I tried this. Love it!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jipper –
No longer have to walk around with your helmets. Great product would definitely recommend.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Red –
The helmet stiorage is limited on the new 2018 gdwing. This product mounts easy and fast and holds two helmets
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
MikeS –
I have 2 bikes and a Helmet Guardian on each. The best way I know to keep a helmet safe when not on my head. It is dirt cheap insurance for the integrity of your helmet when a single fall can ruin that piece of expensive riding gear. If your bike doesn’t have helmet locks, you NEED one of these.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Gadgetman –
Bought my first one for my (then new) ’14 Honda CTX 1300 as its OEM helmet holders SUCK and are inconvenient. The Helmet Guard is quite handy and well engineered. As such, when I picked up a nice used ’07 ST 1300 a few years back I got one for it as well for same reasons. A month ago I took delivery of my ’18 Gold Wing Tour DCT Air Bag. Unlike my previous Wings who’s OEM under trunk Helmet Holders which were perfect, this new ’18’s design are awkward and cumbersome to utilize. So I just bought a 3’rd Helmet Holder and all is well.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Tazbritt –
Had one on my last bike for 10 years. Used it frequently and always worked flawlessly. New bike, so I added another Helmet Guardian.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Bob59 –
I installed it on my bmw r1200rt and it’s perfect for short stop
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Chris –
I have a Helmet Guardian installed on my other Motorcycle and I love it! The Helmet Guardian frees up my Top case space for other things (jacket, gloves, etc…)
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
MaxPete –
Few if any modern bikes have a helmet lock – but the Helmet Guardian solves this problem with a slick little attachment to your licence plate bracket. It provides two secure locks so that you and your passenger can leave your helmet on the bike without too much risk.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mikeyg 1526 –
Goes on easily . A slight bulk but worth it . Works great and is very easy to use & convenient – wonder why I waited so long ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Money Mike –
Essu to install. I have a BMW K1600 and the way my helmets hang on the guardian they touch my hot exhaust pipes. I wish guardian had an accessory to protect helmets from hot pipes. Otherwise it’s a great product.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
NickName –
I’m on my second one because I’ve forgotten the key three times (now I only have one working lock on my bike). Since my wife doesn’t want or need the spare on her key chain, which I grabbed without thinking, I had to use bolt cutters that were thankfully available where I parked my bike. I would like to be able to order a new hook from Helmet Guardian and fix it, but haven’t found a way to contact them to see if the one part can be replaced, or if I have to buy a third one. I’ll be putting the spare key under my locked seat from now on.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Tenere mRide –
This is a great solution for bikes without a helmet lock. Easy install.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Phil –
It is perfect put those motorcycles where there is no place to put your helmet securely. Install in about 10 minutes. Excellent product.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Kevin –
Purchased for a recent road trip with my wife on our BMW K1200GT. Worked great. Very convenient to hold and secure helmets for stops along the way so we didn’t have to lug our helmets with us. When not touring we normally just put our helmets inside our hard cases on the bike, but that wasn’t an option for our trip as they were full with clothes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Richard Redondo –
I installed this feature 2-months ago, and it functions as advertised, which is a great addition to my wheels. It was a tight fit, but do-able with a little fussing. Design looks like it would fit and adjust to any bike because of the large slot-holes on the product.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
donner –
Excellent!!!!
Excellent!!!!
Excellent!!!!
Excellent!!!!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
donner –
Excellent!!!!
Excellent!!!!
Excellent!!!!
Excellent!!!!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
terryhobart –
I’m a long time motorcycle driver. I remember when locks used to come standard on bikes. Not this silly cable you have to pull the seat to attach. This product works perfectly – even better than the old ones I remember.
It is secure and uses security fasteners to prevent removal. Locks both helmets easily.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Honda Lover –
I purchased and installed on my 2016 Yamaha Super Tenere ES. Install was easy. The provided instructions are well written. It did not interfere with my license plate or rear fender at all. It’s discrete. All hardware was of good quality. The locks themselves are adequately secure and have a quality feel when opening or closing. I do use a chrome helmet d loop extender providing additional slack where the D loop hangs from the guardians u Lock. I found this gives just a bit more clearance with this specific bike ensuring the helmet hangs freely/not touching luggage or rear fender. I recommend this if your looking for an easy solution go
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
jeff –
It looked a little flimsy online. However, when I got it and attached it to my bike (VRSCA) it worked fine. Plenty solid enough.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Ducati Bill –
Put this on wife’s Spyder, holds both our helmets. Good quality, Highly recomend
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Brian –
Bought this to mount on the underside of the rear rack on my Concours to hang helmets and jackets from. Works perfectly
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
feema –
I had two of this company’s locks on my last bike, so I didn’t hesitate when I saw this. I love the locking action, and the spring loaded clip so you can leave it open and just snap your helmet in when you stop. However, the plate between the two locks is extremely flimsy and, in fact, mine was bent on arrival. I can’t help thinking it wouldn’t be too difficult to bend this back and forth until it breaks. Now, I need to buy a steel plate to laminate to the back so I can have any trust in it. Disappointing.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal