DENALI Auxiliary Light Mounting Bracket | Yamaha XT1200Z Super Tenere
Description
Laser-cut from mild steel and powder coated black this light mounting bracket is both strong and attractive. The kit allows fitment of any Denali LED Lighting Kit. All mounting hardware and instructions are included. Installation Note: On 2015-on models a small plastic shroud covers the mounting points and must... read more-
Product Documents
Installation Instructions & Manuals
Questions? Call 1-855-255-5550 or contact our sales team
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
Laser-cut from mild steel and powder coated black this light mounting bracket is both strong and attractive. The kit allows fitment of any Denali LED Lighting Kit. All mounting hardware and instructions are included.
Installation Note: On 2015-on models a small plastic shroud covers the mounting points and must be removed to complete installation.
Fitment Note: The DENALI bracket is not compatible with the Yamaha Genuine Crashbar Kit.
DENALI 2.0 LED Auxiliary Lighting Guide | |||
---|---|---|---|
Designed specifically for motorcycles the DENALI 2.0 LED TriOptic auxiliary lights with DataDim technology maximize visibility in an extremely durable efficient compact yet very powerful package. The DENALI 2.0 product line carries a 5-year warranty. | |||
DENALI 2.0 LED TriOptic Auxiliary Light Kits | |||
TriOptic lenses feature spot and either flood or hybrid options to customize your illumination needs while DataDim technology provides dual intensity with the addition of a plug and play module. With black powder coated cooling fins to keep the LEDs cool and operating at full strength an Impact PC corrosion proof bezel protecting the front of the lights from stone chips and DrySeal submersible waterproof construction your way will be clear no matter the conditions. | |||
DENALI D7 2.0 LED TriOptic Light Kit 1500ft maximum range 15330 raw lumens 4.5n round 10 ampstotal draw
DENALI S4 2.0 LED TriOptic Light Kit 540ft maximum range 6132 raw lumens 2.8in square 4.6 amps total draw
DENALI D4 2.0 LED TriOptic Light Kit 800ft maximum range 8760 raw lumens 3.9in square 6.6 amps total draw Includes spot & True-Hybrid lens
DENALI DR1 2.0 LED TriOptic Light Kit 1000ft maximum range 2190 raw lumens 3.7in round 1.6 amps total draw Includes spot & True-Hybrid lens
DENALI D2 2.0 LED TriOptic Light Kit 525ft maximum range 2190 raw lumens 2.2in round 1.6 amps total draw Includes spot & flood lens
DENALI DM 2.0 LED TriOptic Light Kit 395ft maximum range 2190 raw lumens 1.7in round 1.6 amps total draw Includes spot & flood lens
|
|||
DENALI 2.0 Light Specific TriOptic Amber Lens Kits | |||
DENALI 2.0 TriOptic amber lenses are an optional accessory for added daytime visibility and fog-cutting performance. Each kit includes a set of amber spot lenses as well as a set of amber flood or True-Hybrid lenses allowing you to select one or both options to customize your illumination. | |||
DENALI DM 2.0 Amber Lens Kit Replacement lens kit Includes spot & flood lens | DENALI D2 2.0 Amber Lens Kit Replacement lens kit Includes spot & flood lens | DENALI DR1 2.0 Amber Lens Kit Replacement lens kit Includes spot & True-Hybrid lens | DENALI D4 2.0 Amber Lens Kit Replacement lens kit Includes spot & True-Hybrid lens |
DENALI 2.0 TriOptic LED Light Kit Accessories | |||
DENALI 2.0 accessories expand the functionality of your existing DENALI 2.0 TriOptic Light Kit | |||
DENALI 2.0 DataDim Dual Intensity Controller Plug this module into your DENALI 2.0 TriOptic Light Kit to allow switching between full and half intensity with your high beam switch | DENALI 2.0 Hi-Low-Off Waterproof Switch Replace the standard On-Off switch in your DENALI 2.0 TriOptic Light Kit to enable independent control of your DataDim Dual Intensity Controller | DENALI 2.0 Y-Splitter Kit Allows installation of a second pair of DENALI 2.0 TriOptic Light Pods on your existing DENALI 2.0 TriOptic Light Kit | DENALI 2.0 Light Harness Extension Single 24 inch plug and play harness extension allows expansion of your existing DENALI 2.0 TriOptic Light Kit mounting options |
DENALI DRL and Brake Light Options | |||
DENALI DRL and brake lights were built to create the most amount of light from the smallest slimmest housing possible | |||
DENALI DRL Daytime Running Lights With Universal Offset Mounting Kit Designed for fitting a pair of DENALI DRL pods to the side of any M6 hardware mounting point on your motorcycle | DENALI DRL Daytime Running Lights With Universal Fender Mounting Kit Designed to mount a pair of DENALI DRL pods on the front fender of your bike | DENALI B6 Flush Mount LED Auxiliary Brake Light Designed to mount a single B6 Pod to any flat surface on your vehicle | DENALI B6 Dual License Plate LED Auxiliary Brake Lights Designed to mount to either side of your license plate |
Understanding DENALI 2.0 Wiring
Fitment Notes
2011-2019 Yamaha XT1200Z Super Tenere
Part Numbers
Our part number: | LAH.06.10000 |
Manufacturer part number: | LAH.06.10000 |
Fitment
Resources
Product Documents
Installation Instructions & Manuals
You may also like…
Barkbusters Aluminum Bar Handguard Kit ForYamaha XT1200Z Super Tenere
Low stock
$129.95 USD Add to cart
-
DENALI PowerHub2 fuse block master ground block and wiring harness.
In stock
$169.99 USD Add to cart
-
Best Seller
Related products
DENALI Light Mount for Triumph Tiger 1050 ’07-’12
Not currently available to order
-
Closeout
DENALI Auxiliary Light Mounting Bracket | BMW F800GS & Adventure
In stock
$61.99 USD Add to cart
-
SW-MOTECH Auxiliary Light Mounts for Honda CB500X ’13-’18
Not currently available to order
-
Closeout
Ask a Question
B. Christenson –
Will these brackets work with Chelhead LED Driving Lights?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Bucko –
I purchased this for my 2012 Super Tenere in order to mount some Rigid LED lighting. The mounting bracket arrived in a timely manner even thought the ad said it was out of stock. The customer service person I spoke to said it would take two weeks to ship and it was exactly 2’weeks. The bracket is very well made and fitment is perfect. Only suggestion is the bolts and nuts should be stainless for the price. I was able to not only mount the cube lights but also a small bar light. The set up is incredible. The bracket is strong enough to hold all the lights without any deflection or movement. I couldn’t be more pleased with this product at this point. I will put this product through its paces over the summer with several long and arduous adventures planned
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Rick –
I just installed this light bar on my ’17 Super Tenere. This bit of kit could not have been better engineered! Period. I was skeptical prior to buying because it did not look like it would fit because of the bolt pattern under the headlight assembly. Once you remove the factory plastic tang under the headlight, you see all 4 bolt holes then line up perfectly. You will have to cut about a quarter inch off each side of the plastic tang so you can reinstall it while making clearance for the light bar as well. Super simple. I used a chop saw to take that quarter inch off each side.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Kell0819 –
Bought this bracket to mount my Denali D2 Auxilary lights I transfered from another bike . The bolt pattern was very clean when mouting on my 2016 Yamaha Super Tenere absolutely no problem, however there is a plastic body piece on the front of the S10 (the valance ) that bolts below the headlight that needs to be trimmed to fit . About 2/3 mm on each side in order for the bolt holes to line up . Overall a very nice looking / functional bracket that looks OEM .
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Quagmire –
Mount seems well built. Had to trim factory plastic nose piece to get it to fit back in.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
rdr –
Purchased after asking if this mount would work with the OEM engine guards installed, I was told it would. However, it does not. There’s not enough clearance with the “upper hoop” of the OEM guard and this mount, and the “upper hoop” support interferes with the mount. Too bad, because it is a nice mount and I really wanted it to work. Twisted Throttle was quick to issue an RMA including return shipping. Great customer service. Gave it a good rating because it is a nice mount.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
LumpyOne –
I am pleasantly surprised at how heavy duty this bracket is. I wan’t sure what to expect but I love it.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mellow –
This bar is great. Perfect fit and allows you to mount just about any 2 to 3 inch-ish light on each side. Sturdy and well made!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal