Denali Auxiliary Light Mounting Bracket for Yamaha XT1200Z Super Tenere ’11-’19
Description
Laser-cut from mild steel and powder coated black this light mounting bracket is both strong and attractive. The kit allows fitment of any Denali LED Lighting Kit. All mounting hardware and instructions are included.
Installation Note: On 2015-on models a small plastic shroud covers the mounting points and must... read more
-Product Documents
Installation Instructions
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
Laser-cut from mild steel and powder coated black this light mounting bracket is both strong and attractive. The kit allows fitment of any Denali LED Lighting Kit. All mounting hardware and instructions are included.
Installation Note: On 2015-on models a small plastic shroud covers the mounting points and must be removed to complete installation.
Fitment Note: The DENALI bracket is not compatible with the Yamaha Genuine Crashbar Kit.
2011-2019 Yamaha XT1200Z Super Tenere
Part Numbers
Our part number: | LAH.06.10000 |
Manufacturer Number: | LAH.06.10000 |
GTIN12 / UPC Barcode: | 810005870757 |
GTIN13 / EAN Barcode: | 0810005870757 |
Fitment
Fitment Associations
Year | Make | Model |
---|---|---|
Year | Make | Model |
2011 - 2019 | Yamaha | XT1200Z Super Tenere |
All Years | Yamaha | XT1200Z Super Tenere |
Resources
Product Documents
Installation Instructions
You may also like…
DENALI DM 2.0 TriOptic LED Light Kit with DataDim Technology
In stock - ships within 24 hours
Lighting $285.00 USD + Add to cart
Best Seller
DENALI D4 2.0 TriOptic LED Light Kit with DataDim Technology
Out of stock - more coming soon
Lighting $399.00 USD + Add to cart
Best Seller
Barkbusters Aluminum Bar Handguard Kit For Yamaha XT1200Z Super Tenere ’14-’19 | BHG-053 No Plastics
7 left in stock - order soon
Protection $104.90 USD + Add to cart
DENALI PowerHub2 fuse block, master ground block and wiring harness for motorcycles
In stock - ships within 24 hours
Electronics $134.99 USD + Add to cart
Best Seller
Related products
DENALI Upper Light Mount for BMW R1200RT ’05-’13
In stock - ships within 24 hours
DENALI Bike-Specific Light Mounts $44.99 USD + Add to cart
DENALI 32mm-38mm Tube Mount Kit For Mounting Auxiliary Lights To Frame, Fork & Crash Bars | Chrome
In stock - ships within 24 hours
Lighting $82.99 USD + Add to cart
SW-MOTECH Auxiliary Lighting Mount Kit for Kawasaki Versys-X 300 ’17-’19
Special order - Order now for fastest delivery
Lighting $23.95 USD + Add to cart
DENALI 21mm-29mm Tube Mount Kit For Mounting Auxiliary Lights To Frame & Crash Bars | Black
In stock - ships within 24 hours
Lighting $74.99 USD + Add to cart
Best Seller
Mellow –
This bar is great. Perfect fit and allows you to mount just about any 2 to 3 inch-ish light on each side. Sturdy and well made!
(0) (0) Watch Unwatch
LumpyOne –
I am pleasantly surprised at how heavy duty this bracket is. I wan’t sure what to expect but I love it.
(0) (0) Watch Unwatch
rdr –
Purchased after asking if this mount would work with the OEM engine guards installed, I was told it would. However, it does not. There’s not enough clearance with the “upper hoop” of the OEM guard and this mount, and the “upper hoop” support interferes with the mount. Too bad, because it is a nice mount and I really wanted it to work. Twisted Throttle was quick to issue an RMA including return shipping. Great customer service. Gave it a good rating because it is a nice mount.
(0) (0) Watch Unwatch
Quagmire –
Mount seems well built. Had to trim factory plastic nose piece to get it to fit back in.
(0) (0) Watch Unwatch
Kell0819 –
Bought this bracket to mount my Denali D2 Auxilary lights I transfered from another bike . The bolt pattern was very clean when mouting on my 2016 Yamaha Super Tenere absolutely no problem, however there is a plastic body piece on the front of the S10 (the valance ) that bolts below the headlight that needs to be trimmed to fit . About 2/3 mm on each side in order for the bolt holes to line up . Overall a very nice looking / functional bracket that looks OEM .
(0) (0) Watch Unwatch
Rick –
I just installed this light bar on my ’17 Super Tenere. This bit of kit could not have been better engineered! Period. I was skeptical prior to buying because it did not look like it would fit because of the bolt pattern under the headlight assembly. Once you remove the factory plastic tang under the headlight, you see all 4 bolt holes then line up perfectly. You will have to cut about a quarter inch off each side of the plastic tang so you can reinstall it while making clearance for the light bar as well. Super simple. I used a chop saw to take that quarter inch off each side.
(0) (0) Watch Unwatch
Bucko –
I purchased this for my 2012 Super Tenere in order to mount some Rigid LED lighting. The mounting bracket arrived in a timely manner even thought the ad said it was out of stock. The customer service person I spoke to said it would take two weeks to ship and it was exactly 2’weeks. The bracket is very well made and fitment is perfect. Only suggestion is the bolts and nuts should be stainless for the price. I was able to not only mount the cube lights but also a small bar light. The set up is incredible. The bracket is strong enough to hold all the lights without any deflection or movement. I couldn’t be more pleased with this product at this point. I will put this product through its paces over the summer with several long and arduous adventures planned
(0) (0) Watch Unwatch