DENALI DM 2.0 TriOptic LED Light Kit with DataDim Technology

The DENALI DM 2.0 LED TriOptic™ LED light kit with DataDim technology maximizes visibility in an extremely durable efficient compact yet very powerful package. The DM is primarily designed for conspicuity so you’ll stand out from road clutter and be seen by other drivers but it also provides a useful increase in illumination over your motorcycle’s stock headlight. Fitted into rugged aluminum housings only 1.7in in diameter and 2.4in long are powerful 10-watt Cree LEDs providing 395ft of useful confidence inspiring light. The DM’s compact shape allows it to be fitted anywhere your imagination takes it although it’s really optimized for fender mounting.

DENALI 2.0 Installation and Operation

The DENALI DM features a durable black powder-coated finish and special cooling fins to make sure the LED itself runs cool and bright. New for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone and debris impacts. Low profile hinge mounts offer secure mounting and include stainless steel M8 mounting hardware for installation on light bars or model specific light mounts.

The DM 2.0 kit uses a just-developed HotSwap™ modular wiring harness that by default causes these lights to function at full brightness. But if you would like them to operate at both half and full power simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)

Also new with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Each lamp comes with both spot (installed) and flood (supplied) lenses in the box nothing else to buy. The spot lens produces the greatest beam distance while the flood lens produces a broader spread of light closer to the motorcycle filling the road edge and shoulders. To get the best of both worlds use a spot lens on one light and a flood lens on the other light for distance illumination and a useful spread of light at close range. The flood lenses are E-Marked to be road legal in countries where this is a requirement.

With new optics a revised and more powerful LED an entirely new wiring harness and the capability of running in both single- and dual-intensity configurations the hugely popular DENALI DM just got a whole lot better.

Specifications:

• LEDs 10 watt Cree XPL HI (per lamp)
• Power Draw: 1.6 amps (total)
• Beam Distance (spot): 395ft
• Beam Width (spot): 55ft
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim™ Compatible: Yes
• Operating Voltage: 12v
• Pod Size: 1.7in diameter x 2.4in deep

DM Kit Contents:

• (2) LED light pods
• (2) Spot lenses (pre-installed)
• (2) E-Mark approved elliptical flood lenses
• (1) HotSwap™ single intensity wiring harness
• (1) DrySeal™ waterproof illuminated switch
• (1) 7/8in handlebar switch mount
• (1) 1in handlebar switch mount
• (2) Hinge mounts with M8 stainless steel hardware
• (4) Zip ties & (1) adhesive mounting square

DENALI 2.0 LED Auxiliary Lighting Guide
Designed specifically for motorcycles the DENALI 2.0 LED TriOptic auxiliary lights with DataDim technology maximize visibility in an extremely durable efficient compact yet very powerful package. The DENALI 2.0 product line carries a 5-year warranty.
DENALI 2.0 LED TriOptic Auxiliary Light Kits
TriOptic lenses feature spot and either flood or hybrid options to customize your illumination needs while DataDim technology provides dual intensity with the addition of a plug and play module. With black powder coated cooling fins to keep the LEDs cool and operating at full strength an Impact PC corrosion proof bezel protecting the front of the lights from stone chips and DrySeal submersible waterproof construction your way will be clear no matter the conditions.
DENALI D7 2.0 LED TriOptic Light Kit 1500ft maximum range 15330 raw lumens 4.5n round 10 ampstotal draw   DENALI S4 2.0 LED TriOptic Light Kit 540ft maximum range 6132 raw lumens 2.8in square 4.6 amps total draw   DENALI D4 2.0 LED TriOptic Light Kit 800ft maximum range 8760 raw lumens 3.9in square 6.6 amps total draw Includes spot & True-Hybrid lens   DENALI DR1 2.0 LED TriOptic Light Kit 1000ft maximum range 2190 raw lumens 3.7in round 1.6 amps total draw Includes spot & True-Hybrid lens   DENALI D2 2.0 LED TriOptic Light Kit 525ft maximum range 2190 raw lumens 2.2in round 1.6 amps total draw Includes spot & flood lens   DENALI DM 2.0 LED TriOptic Light Kit 395ft maximum range 2190 raw lumens 1.7in round 1.6 amps total draw Includes spot & flood lens
DENALI 2.0 Light Specific TriOptic Amber Lens Kits
DENALI 2.0 TriOptic amber lenses are an optional accessory for added daytime visibility and fog-cutting performance. Each kit includes a set of amber spot lenses as well as a set of amber flood or True-Hybrid lenses allowing you to select one or both options to customize your illumination.
DENALI DM 2.0 Amber Lens Kit Replacement lens kit Includes spot & flood lens	DENALI D2 2.0 Amber Lens Kit Replacement lens kit Includes spot & flood lens	DENALI DR1 2.0 Amber Lens Kit Replacement lens kit Includes spot & True-Hybrid lens	DENALI D4 2.0 Amber Lens Kit Replacement lens kit Includes spot & True-Hybrid lens
DENALI 2.0 TriOptic LED Light Kit Accessories
DENALI 2.0 accessories expand the functionality of your existing DENALI 2.0 TriOptic Light Kit
DENALI 2.0 DataDim Dual Intensity Controller Plug this module into your DENALI 2.0 TriOptic Light Kit to allow switching between full and half intensity with your high beam switch	DENALI 2.0 Hi-Low-Off Waterproof Switch Replace the standard On-Off switch in your DENALI 2.0 TriOptic Light Kit to enable independent control of your DataDim Dual Intensity Controller	DENALI 2.0 Y-Splitter Kit Allows installation of a second pair of DENALI 2.0 TriOptic Light Pods on your existing DENALI 2.0 TriOptic Light Kit	DENALI 2.0 Light Harness Extension Single 24 inch plug and play harness extension allows expansion of your existing DENALI 2.0 TriOptic Light Kit mounting options
DENALI DRL and Brake Light Options
DENALI DRL and brake lights were built to create the most amount of light from the smallest slimmest housing possible
DENALI DRL Daytime Running Lights With Universal Offset Mounting Kit Designed for fitting a pair of DENALI DRL pods to the side of any M6 hardware mounting point on your motorcycle	DENALI DRL Daytime Running Lights With Universal Fender Mounting Kit Designed to mount a pair of DENALI DRL pods on the front fender of your bike	DENALI B6 Flush Mount LED Auxiliary Brake Light Designed to mount a single B6 Pod to any flat surface on your vehicle	DENALI B6 Dual License Plate LED Auxiliary Brake Lights Designed to mount to either side of your license plate

Understanding DENALI 2.0 Wiring