Kaoko Throttle Stabilizer Cruise Control for Yamaha FZ-09 ’14-’17, MT-09 ’18-’19 & FJ-09 ’15-’17 with Barkbusters, SW-MOTECH or OEM Handguards
Description
This Kaoko Throttle Stabilizer Cruise Control was created to maximize the enjoyment of your ride. Designed to reduce fuel consumption and facilitate speed maintenance this accessory is a must have for any rider who is serious about getting the most out of a trip. Which is everyone right? Stop worrying about that speedometer and enjoy a smooth ride with the help of this throttle lock. read more Brand: KaokoQuestions? Call 1-855-255-5550 or contact our sales team
- Description
- Part Numbers
- Fitment
- Resources
- Videos
- Add a review
Description
Fitment Note: Not compatible with OEM heated grips
Features:
- Elevates rider stamina and lessens strain on wrists and hands
- En-route ability to remove hand from throttle grip with throttle opening remaining set
- Easy to operate even with bulky winter apparel
- High quality compact and durable design super smooth action
- Quick Installation
- Low maintenance
- Decreases wear and tear on throttle cables and linkages
- Can result in improved fuel mileage
- Compatible with Barkbusters OEM or SW-MOTECH handguards
Replacement bar end weight NOT included in kit.
Kaoko Safety Warning: The Kaoko Cruise Control is an aftermarket accessory. Any misunderstood abused or incorrectly installed motorcycle accessory is a safety hazard that could cause injury or death. Its the riders responsibility to understand the operation and purpose for which the Kaoko Cruise Control is designed namely for cruising only when safe to do so. At all other times the control should be disengaged. The Kaoko Cruise Controls are to be used only by experienced and responsible riders.
Fitment Notes2014-2017 Yamaha FZ-09
2018-2019 Yamaha MT-09
2015-2017 Yamaha FJ-09
Part Numbers
Our part number: | KAO.YAM650 |
Manufacturer part number: | YAM650 |
Fitment
Resources
Videos
You may also like…
R&G Racing Chain Guard for Yamaha FZ-09, FJ-09, and XSR900
Special order
$65.99 USD Add to cart
Givi ES2122 Kickstand Footprint Enlarger for Select Yamaha Motorcycles
In stock
$50.40 USD Add to cart
Sale
SW-MOTECH Front Axle Slider Kit | Yamaha FJ-09 ’15-’17, XSR900 ’16-’19
Low stock
$79.95 USD Add to cart
Closeout
SW-MOTECH EVO Side Carriers for Yamaha FJ-09
Not currently available to order
Closeout
R&G Racing Aero Style Front Frame Sliders for Select Yamaha Motorcycles
Low stock
$110.99 USD Add to cart
R&G Racing Right Side Engine Case Cover for Select Yamaha Motorcycles
Low stock
$107.99 USD Add to cart
R&G Racing Yamaha Motorcycle Accessories for FZ-09 MT-09 FJ-09 XSR900 & Tracer 900/GT
Special order
$122.99 USD Add to cart
R&G Racing Right Side Starter Engine Case Cover for Select Yamaha Motorcycles
Special order
$79.99 USD Add to cart
R&G Racing Front Axle Sliders for Yamaha FZ-09, MT-09, FJ-09, XSR900
Low stock
$56.99 USD Add to cart
R&G Racing Bar End Sliders for Yamaha FJ-09
In stock
$47.99 USD Add to cart
Featured Video
Related products
Kaoko Throttle Stabilizer Cruise Control for BMW R1200C & R1200CL | Chrome
Low stock
$159.99 USD Add to cart
Kaoko Throttle Stabilizer Cruise Control for BMW K1300GT, K1200GT, R1200RT ’05-’09, R1150RT, R1150R, R1150GS, R1150GS Adventure, R1100RT, R1100R, R1100GS, R850GS, R850R w/ or w/o Barkbusters or SW-MOTECH Handguards
In stock
$144.99 USD Add to cart
Best Seller
Kaoko Throttle Stabilizer Cruise Control for BMW F800GS ’08-’12, F650GS ’08-’12 & F800R ’09-’14 | Models without handguards or with retro-fitted BMW R1200GS or Touratech handguards
Low stock
$144.99 USD Add to cart
Pete –
Easy install great performance … Highly recommended if you can’t get electronic cruise get this!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Grungy –
This throttle lock was easy to install. Basically, it acts as a nut that puts pressure on the side of the throttle grip keeping the grip in place. I live in the Northeast so I have to make frequent changes to the throttle to adjust for hills. This is easy to accomplish with the throttle lock engaged. The perfect cruise control would be an electronic one, but this is the next best thing.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Grungy –
This throttle lock was easy to install. Basically, it acts as a nut that puts pressure on the side of the throttle grip keeping the grip in place. I live in the Northeast so I have to make frequent changes to the throttle to adjust for hills. This is easy to accomplish with the throttle lock engaged. The perfect cruise control would be an electronic one, but this is the next best thing.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
oldenough –
Just installed and wanted to correct the record. They fit perfectly with the heated grips. Installation took 10 minutes with no mods required. It may be that the 2017 heated grips are different from earlier years or, perhaps, the way that dealers install the grips might differ from one dealer to another. I haven’t had a chance to try them out yet but had them on another bike and loved them. My only question was whether or not they would fit. I only wish it was a little less expensive.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
oldenough –
Just installed and wanted to correct the record. They fit perfectly with the heated grips. Installation took 10 minutes with no mods required. It may be that the 2017 heated grips are different from earlier years or, perhaps, the way that dealers install the grips might differ from one dealer to another. I haven’t had a chance to try them out yet but had them on another bike and loved them. My only question was whether or not they would fit. I only wish it was a little less expensive.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Frankum1998 –
I received it quickly from Twisted Throttle.. Great products !!!! And shipping… Took approx 30 min to install… The throttle side OEM hand guards will stretch enough to install the 8mm end bolt when assembling but needs some patience. The look of the throttle lock is barely noticeable and blends with the bike. Took it for a 30 mile test on the highway and very easy to use. Get the bike up to speed and twist the throttle lock so it puts pressure against the throttle tube to sustain the mph. It’s not as good as a digital or factory cruise control but will most DEFINATELY help on long rides when you need to rest your wrist and hands.. Great purchase and would recommend as long as you understand that you are buying a throttle lock…. Not a cruise control. After the lock is being used you can always make minor adjustments with the throttle to speed up and slow down and you will loose speed on hills.
Great purchase
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Butterfly –
By “Tweakers Delight”, I mean so far I’ve had to do a LOT of micro-adjusting after I set this (you set it by turning the ring once you’ve reached desired speed). I have to turn the ring (the ridged “friction nut”) to snug first, then half-turn tighter at exactly the right moment, and then, in order to counter-act the slow, steady rise or fall of speed, I have to keep tweaking so lightly I’m just firming the throttle grip, not actually turning it. However, It seems like I’ll gradually develop enough feel for it so that eventually the micro-adjusting will be at a minimum. This throttle lock is very safe, since I only have to turn the ring forward again with my pinky to disengage (make sure you do that before you change gears, unless you like hearing your RPMs skyrocket!). It mounts easily, as long as you have a 12mm coupler nut to remove Yamaha’s end piece on the hand grip. I would recommend this only for long-distance travelers and riders who are prone to bad hand cramps.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal