SW-MOTECH Handlebar Riser Set For Selet Triumph Models | 20mm Rise
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
Includes two M10x1.25x110mm bolts.
Fits:
- 2012-2015 Triumph Explorer 1200
- 2012-2015 Triumph Explorer 1200 XC
- 2016-2018 Triumph Tiger Explorer XCx
- 2016-2018 Triumph Tiger Explorer XCa
- 2016-2018 Triumph Tiger Explorer XR
- 2016-2018 Triumph Tiger Explorer XRx
- 2016-2018 Triumph Tiger Explorer XRt
- 2011-2014 Triumph Tiger 800
- 2011-2018 Triumph Tiger 800 XC
- 2015-2018 Triumph Tiger 800 XCx
- 2015-2018 Triumph Tiger 800 XCa
- 2015-2018 Triumph Tiger 800 XR
- 2015-2018 Triumph Tiger 800 XRx
- 2016-2018 Triumph Tiger 800 XRt
2012-2015 Triumph Explorer 1200
2012-2015 Triumph Explorer 1200 XC
2016-2018 Triumph Tiger Explorer XCx
2016-2018 Triumph Tiger Explorer XCa
2016-2018 Triumph Tiger Explorer XR
2016-2018 Triumph Tiger Explorer XRx
2016-2018 Triumph Tiger Explorer XRt
2011-2014 Triumph Tiger 800
2011-2018 Triumph Tiger 800 XC
2015-2018 Triumph Tiger 800 XCx
2015-2018 Triumph Tiger 800 XCa
2015-2018 Triumph Tiger 800 XR
2015-2018 Triumph Tiger 800 XRx
2016-2018 Triumph Tiger 800 XRt
Part Numbers
Our part number: | LEH.11.039.10000.S |
Manufacturer part number: | LEH.11.039.10000/S |
Fitment
This Product Fits
Triumph
- Triumph Tiger 1200 XCx / XCa 2018, 2019, 2020
- Triumph Tiger 1200 XR / XRx / XRt 2018, 2019, 2020
- Triumph Tiger 800 / XC 2010, 2011, 2012, 2013, 2014
- Triumph Tiger 800 XC / XCx / XCa 2015, 2016, 2017
- Triumph Tiger 800 XCx / XCa 2018, 2019
- Triumph Tiger 800 XR / XRx / XRt 2015, 2016, 2017, 2018, 2019
- Triumph Tiger 900 2020
- Triumph Tiger 900 GT 2020, 2021
- Triumph Tiger 900 GT Low 2020
- Triumph Tiger 900 GT LRH 2021
- Triumph Tiger 900 GT Pro 2020, 2021
- Triumph Tiger 900 Rally 2020, 2021
- Triumph Tiger 900 Rally Pro 2020, 2021
- Triumph Tiger Explorer 1200 / XC 2012, 2013, 2014, 2015
- Triumph Tiger Explorer XCx / XCa 2016, 2017
- Triumph Tiger Explorer XR / XRx / XRt 2016, 2017
Resources
You may also like…
Kaoko Throttle Stabilizer Cruise Control for Triumph Street Triple ’11-’17, Tiger 800 ’11-’14, Tiger 800 XC ’11-’14, XCx ’15-’17 & Explorer 1200 ’12-’15 with or without Barkbusters or SW-MOTECH Handguards
Low stock
$139.99 USD Add to cart
-
Left & Right Side M10 Threaded Mirror Extenders For Select BMW, Ducati, Honda, Kawasaki, KTM, Suzuki, & Triumph Models
Not currently available to order
-
Best Seller Closeout
SW-MOTECH KOBRA Handguard Kit For Triumph Tiger 800 & Explorer 1200
Not currently available to order
-
Closeout
SW-MOTECH Quick Release Headlight Guard for Select Triumph Motorcycles
Not currently available to order
-
Closeout
Related products
SW-MOTECH Handlebar Riser Kit For BMW R1200RT ’05-’13
Not currently available to order
-
Closeout
SW-MOTECH Handlebar Riser Kit to fit 22mm Handlebars for Select Bikes
Not currently available to order
-
Closeout
SW-MOTECH Handlebar Riser Set For Triumph Street Triple 675 ’12-’17
Not currently available to order
-
Closeout
Ask a Question
James Mann –
You make risers for Suzuki GSXR 1000 2001
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
doncj22 –
Had these risers now for a month or a little longer. Works great. Easy install, just needs have a little persuasion to get the factory handlebar posts out and get the risers installed. As usual, everything from Twisted Throttle is easy to order, very quick shipping (got these sooner than I thought) and the products they offer are top notch.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
foulal –
Nice addition to my tiger, makes the long drones more comfortable, very easy to install with hardware included.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Ray –
I should have bought these risers when I purchased my 2017 Explorer XRx. My hands are in perfect alignment with the handlebars and I’m not hunched over reaching for the controls making my hands numb while riding. Awesome investment for a better ride.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Donthaveone –
Purchased about 45 days ago and am so glad I did. 10 min install. All cables and hoses had plenty of length. No more wrist or forearm pain. Highly recommend.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
mat4cool –
Finaly received exactly what I needed
Qqqqqqqqqqqq
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mortarman123 –
The handlebar risers arrived on time and were very easy to install.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Zip –
Installed easy took maybe 5 minutes Raised the handelbar just perfect.
Makes the ride better
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Rayleigh –
The only question I ask myself is why didn’t I fit these sooner . Easiest of installations and what a different it’s made to riding comfort
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mike8867 –
Works great. Reduces the reach for me. The motorcycle still handles great.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Heliman –
It did exactly as I hoped. Reduce the lean on the grips. I tried it out on a 2500 mile ride to Crater Lake, OR.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
jim –
It makes it a little more comfortable as others said .It’s worth it .
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Superfunkomatic –
The only reason it is not 5 stars is I struggled with the price. In saying that, the part is very well made, fits well, and was very easy to install. It is a far superior design to the other versions I considered as they were mounted between the stock riser and bars and were too noticeable. These mount below the stock risers and are very subtle. A much cleaner look for the same end result.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
ls6777 –
Easy to Install, brought up the handlebars to a better position for me. Completely satisfied, although it seems like a lot of money for 2 pieces of metal and 2 bolts.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Tiger –
After first ride with the risers installed, very clear difference. Arms are in a more relaxed position. Installation was only 10 minutes. Great product for the price.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
CC12 –
I bought these looking for some fatigue relief on day rides. I can say after two trips that there has been an improvement, not as tired or sore at the end of the day. Still need to invest in new seat to complement the more up right seating position.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dave –
I had problems with cramps and numbness in my hands on my ’14 tiger explorer. Problem solved with these risers. Clear instructions and easy to install. Although the rest of the cables were plenty long, the stock clutch cable was just long enough, so at least for my bike, anything longer would require changing the clutch cable.
The finish is very close the stock finish on my bike. I think it looks fine, and probably nobody would notice the difference unless you pointed it out, but then I’m not a fanatic about how the bike looks.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jack –
The risers add just enough elevation to the bars for a much more comfortable posture when standing on the pegs. A must for offroad excursions !
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Advguy –
These are SW-Motech brand. Nothing special, just a couple of metal blocks to rise the handlebar. I wish I had bought Rox risers, which can be rotated towards the rider. I still feel like I’m leaning forward with these. Better than stock I guess. Also, I needed a rubber mallet to install the risers.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
fenceman –
Stock bars were a little too low for all day comfort on my 800 Tiger.
These risers did the trick, adding just enough height to make the ride that much more comfortable. It took all of 20 min. to install.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Purple6 –
They bring the bars back just the right amount for me. Quality part.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
borisdoc –
Quick delivery, very good product, good quality and easy installation.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Raja –
It was surprisingly easy to install these. I was able to install the risers and reposition the bar to my liking in 20 minutes, and go for a ride!
I was worried about the mismatch of colors/metallic finish, but its barely noticeable unless you’re really trying to pay attention.
I’m 6 ft and my riding position is a lot more comfortable thanks to these risers.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
ToeKnee –
I tried to order these risers on a Tuesday and they were showing as back ordered so I called to be sure. The young man that I spoke with encouraged me to order them even though they were back ordered because he showed that they would be in stock and shipped “by the end of the week”. I blindly trusted the Kid and came to the website to order them. Well wasn’t I surprised to get an email 3 days later (Friday) that the risers were IN STOCK and already SHIPPED to me. (Just as the “Kid” said the would) I was fully expecting that the risers would get to me the following week but they actually arrived in LESS THEN 24 HOURS!!!!! Needless to say, I’m very please with my first purchase from Twisted Throttle.
I’ve already installed the risers which took 30 mins INCLUDING set up and clean up. Yes they are a buffed finish while the rest of the risers are grayed out but I think they do that so that they will stand out. I like that look. Also, they are now engraved with the “SW-MOTECH” logo which gives it an added bling factor. I have not ridden the bike yet but I am very happy with the slight up and back position that these provide. Do I recommend? YES!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dirteagle –
Easy install, great fit! Did not need to fiddle with cables at all. These were installed on a 2014 Triumph Tiger Explorer XC.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
alvarorlvb –
I bought this risers a few weeks ago I just installed yesterday and i am very happy with the comfort
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Ryan –
Dont buy a generic version if you can get these for your Tiger.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
David –
Installed these handlebar risers on my Tiger 800. My observations are similar to others – the risers do a good job of getting some of the weight shifted off of your wrists, making you slightly more upright, and improve how it feels to stand-up on the bike (I am 5′ 10″ tall). I noticed less fatigue for both long distance freeway miles and aggressive back-road riding. I am very happy with the risers and would recommend them to anyone with similar goals in mind.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Brandon –
Put these on my 800xc, they are just perfect for standing up and they help me sit up a little straighter while sitting. Solid build quality easy as pie to install only took about five minutes. For reference I am 6’3″ with a 30″ inseam, and I’m super comfortable.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Anonymous –
Nicely crafted product! Easy installation. Looks great, too. The increase in height of the handlebar has significantly improved the comfort quotient on my Tiger 800! Now….about that seat.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Lloyd –
I installed this on a ’12 TEX. Previously I had my seat custom shaped for comfort. The handlebars were a bit too low. This solved the problem. Just unscrew two bolts and pull out the factory riser which is held in place by tension. This fit me perfectly.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Anonymous –
These are very well made , but they do not color match. Perhaps the next batch will color match the bike. If not, take them to a local machine shop with a commercial sand blaster and have them sand blasted. Then spray a clear coat on them and they will look very close to the oem.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Daniel –
Super easy to install. The instructions call for using threadlock. I agree that it should be used on the big bolts for safety but I wouldnt thread lock the small oem tension bolts if you plan on installing anything else or ajdusting the bar position after the install. There is still plenty of brake and clutch cable. The height increase is noticable and is awesome! Price is good but the standard shipping cost is really lame! I checked with the post office and it would have cost about half what was charged for shipping here.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal