SW-MOTECH Quick Release GPS Holder for Yamaha XT1200Z Super Tenere
This product is no longer available.
Description
This accessory mount uses existing windscreen mounting points to provide a secure flat mounting surface with an adjustable viewing angle and height. Designed to move the GPS unit away from the rider to a more direct line of sight. This unit also has the added functionality of a quick release tab that removes the dampened device holder for a cleaner look. Pre-drilled holes are perfectly positioned to attach any RAM-... read more-
Brand: SW-MOTECHQuestions? Call 1-855-255-5550 or contact our sales team
Closeout
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
This accessory mount uses existing windscreen mounting points to provide a secure flat mounting surface with an adjustable viewing angle and height. Designed to move the GPS unit away from the rider to a more direct line of sight. This unit also has the added functionality of a quick release tab that removes the dampened device holder for a cleaner look. Pre-drilled holes are perfectly positioned to attach any RAM-B-238-compatible RAM mounts (sold separately) OR a TomTom Rider GPS.
The RAM-B-238 should NOT be used to add arms to the mount platform as excessive vibration may occur.
An additional hole is pre-drilled in this mount when used with with the ram holders for the Garmin Etrex Garmin Quest Garmin 60 Series and other RAM GPS mounts that have a 45 degree offset mounting position.
Cannot be installed on a bike fitted with Yamaha OEM Side Wind Deflectors.
Confused on how to separate the two pieces in the kit? Watch the video below!
The mounting patterns in this mount include a universal AMPS hole pattern as well as horizontal vertical and diagonal RAM hole patterns.
The AMPS hole pattern is an industry standard hole configuration. It consists of four (4) holes located in a rectangular pattern spaced at 1.188in by 1.813in (30mm by 38mm). In most cases the AMPS pattern consists of 8 holes. This allows the mount to be fitted in both a horizontal or vertical orientation. Most third party mounting devices and cradles have the AMPS hole pattern.
Garmin supplied cradles for the Garmin zumo 340 345 350 390 590 595 and 660 require the SW-MOTECH GPS Adapter Kit GPS.00.085.100000.B be installed with this mount.
The Below Listed Cases & Cradles Are Compatible With This Mount
RAM Mounts Device Cradle Fit Guide
RAM Mounts Device cradles consist of a high strength composite and have a hole pattern that will allow fitment to all RAM components or mounts that use the universal AMPS hole pattern.
Device | RAM Mounts Cradle |
---|---|
Click on a selection to view product | |
Garmin Astro 220 | RAM-HOL-GA12U |
Garmin BMW Navigator II & III | RAM-HOL-GA9U |
Garmin eTrex Legend Summit Venture & Vista | RAM-HOL-GA5U |
Garmin GPS 60 | RAM-HOL-GA12U |
Garmin GPSMAP 176 176C & 196 | RAM-HOL-GA7U |
Garmin GPSMAP 276C & 296 | RAM-HOL-GA7U |
Garmin GPSMAP 376C 378 & 396 | RAM-HOL-GA7U |
Garmin GPSMAP 478 & 496 | RAM-HOL-GA7U |
Garmin GPSMAP 60 60C 60CS 60CSx & 60Cx | RAM-HOL-GA12U |
Garmin Montana 600 650 650T 680 & 680T | RAM-HOL-GA46U |
Garmin nuvi 1300 1310T 1350 1350T 1370T. 1390 & 1390T | RAM-HOL-GA34U |
Garmin nuvi 1440 1450 & 1490T | RAM-HOL-GA35U |
Garmin nuvi 200 205 250 255 260 265T & 270 | RAM-HOL-GA24U |
Garmin nuvi 200W 205W 250W 255W 260W 265W 265WT & 285WT | RAM-HOL-GA25U |
Garmin nuvi 220 | RAM-HOL-GA32U |
Garmin nuvi 2450 2450LM 2460LT 2460LMT 2555LT & 2555LMT | RAM-HOL-GA52U |
Garmin nuvi 2455LMT 2475LT & 2495LMT | RAM-HOL-GA25U |
Garmin nuvi 2455LT 2455LMT 2475LT & 2495LMT | RAM-HOL-GA34U |
Garmin nuvi 30 | RAM-HOL-GA51U |
Garmin nuvi 300 310 350 360 & 370 | RAM-HOL-GA21U |
Garmin nuvi 3550LM & 3590LMT | RAM-HOL-GA53U |
Garmin nuvi 465T | RAM-HOL-GA25U |
Garmin nuvi 50 & 50LM | RAM-HOL-GA50U |
Garmin nuvi 500 510 & 550 | RAM-HOL-GA32U |
Garmin nuvi 600-680 | RAM-HOL-GA23U |
Garmin nuvi 710 750 755T 760 765T 770 775T 780 & 785T | RAM-HOL-GA26U |
Garmin nuvi 800 850 855 860 880 & 885T | RAM-HOL-GA30U |
Garmin Quest & Quest 2 | RAM-HOL-GA15U |
Garmin StreetPilot i2 i3 & i5 | RAM-HOL-GA22U |
Garmin StreetPilot 2610 2620 2650 2660 2720 2730 & 2820 | RAM-HOL-GA9U |
Garmin StreetPilot c530 c550 c580 i2 i3 & i5 | RAM-HOL-GA22U |
Garmin zumo 220 | RAM-HOL-GA32U |
SPOT Connect | RAM-HOL-SPO3U |
SPOT IS | RAM-HOL-SPO2U |
SPOT Gen3 | RAM-HOL-SPO4U |
SPOT Satellite GPS Messenger | RAM-HOL-SPO2U |
SPOT Satellite Personal Tracker | RAM-HOL-SPO1U |
TomTom ONE 125 130 & 130s | RAM-HOL-TO7U |
TomTom ONE 2nd & 3rd Editions | RAM-HOL-TO4U |
TomTom ONE XL & XLS | RAM-HOL-TO5U |
TomTom V2 & V3 | RAM-HOL-TO4U |
2011-2013 Yamaha XT1200Z Super Tenere
Part Numbers
Our part number: | GPS.06.646.10100.B |
Replaces these SKUs: | GPS.06.151.10000.B |
Manufacturer part number: | GPS.06.646.10100/B |
Fitment
Resources
You may also like…
SW-MOTECH Crash Bars Engine Guards for Yamaha XT1200Z Super Tenere ’10-’19
Not currently available to order
-
Closeout
Kaoko Throttle Stabilizer Cruise Control for Yamaha XT1200Z Super Tenere ’11-’13 with Barkbusters, SW-MOTECH or OEM Handguards
In stock
$144.99 USD Add to cart
-
SW-MOTECH Handlebar Risers for Yamaha XT1200Z Super Tenere ’10-’13
Not currently available to order
-
Closeout
Related products
Round Mounting Base Plate With Standard AMPS Hole Pattern
Low stock
$9.49 USD Add to cart
-
Sale
GIVI Z995M Replacement Brakelight Connector and Wire
In stock
$18.00 USD Add to cart
-
Sale
Denali 194 Marker Bulb Plug-and-Play Trigger Wire Adapter
In stock
$52.50 USD Add to cart
-
Closeout
magic1 –
THIS GPS MOUNT IS VERY WELL MADE, EASY TO INSTALL AND WORKS WELL WITH SMALLER GPS UNITS. I DON’T KNOW HOW IT WOULD WORK ON THE LARGER UNITS.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Juan –
Very good product. The price compared to other brands is very competitive. I have a Garmin Zumo 660 and it was vibrating after installing. I solved the issued putting washers between the GPS and the holder.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Superfunkomatic –
Anyone with some basic tools and basic mechanical skills can mount this bracket. It looks very professional as well
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
John –
PROS: Location, location, location. This is the ideal view-centered perch for a nav unit. Installation on my Tenere was simple and well instructed using the enclosed procedure. Straightforward and concise directions.
For 8k miles it’s been a sound mount and allows for simple, one-handed GPS mounting and dismounting. Wired through ignition and good to go.
CONS: Vibration Damping… Not truly. I have a larger new Garmin model and yet still find it difficult to read text at speed due to a fine-medium resonant vibration. Not a deal breaker, just not quite as put forth. I thought perhaps by loosening or tightening screws running through rubber bumpers might help with finding the sweet spot to cancel the vibes but no luck there.
I come from RAM mounts on handlebars on other bikes and although I much prefer that degree of vibration damping… I much prefer this mount if only for location.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal