SW-MOTECH Vibration-Damped Quick Release GPS Holder Suzuki V-Strom

  • phpkCKl6m
  • phpkCKl6m

 This product is no longer available.


SW-MOTECH Vibration-Damped Quick Release GPS Holder for Suzuki V-Strom DL650 & V-Strom 650XT

This bike-specific electronics mount is outfitted with quick-disconnect and vibration damped mechanisms. This device mount will hold any RAM-B-238-compatible RAM Mount Garmin Zumo GPS TomTom Rider GPS or an SW-MOTECH GPS or PDA pocket. read more

Product Documents

, ,
1.38891225 lbs
1 × 1 × 1 in
Electronics Accessories Type:




The GPS holder positions the GPS so that it does not obscure your instruments.

Confuzzled on how to separate the two pieces in the kit? Watch the video below!

The mounting patterns in this mount include a universal AMPS hole pattern as well as horizontal vertical and diagonal RAM hole patterns.

The AMPS hole pattern is an industry standard hole configuration. It consists of four (4) holes located in a rectangular pattern spaced at 1.188in by 1.813in (30mm by 38mm). In most cases the AMPS pattern consists of 8 holes. This allows the mount to be fitted in both a horizontal or vertical orientation. Most third party mounting devices and cradles have the AMPS hole pattern.

Garmin supplied cradles for the Garmin zumo 340 345 350 390 590 595 and 660 require the SW-MOTECH GPS Adapter Kit GPS.00.085.100000.B be installed with this mount.

The Below Listed Cases & Cradles Are Compatible With This Mount

RAM Mounts Device Cradle Fit Guide

RAM Mounts Device cradles consist of a high strength composite and have a hole pattern that will allow fitment to all RAM components or mounts that use the universal AMPS hole pattern.

DeviceRAM Mounts Cradle
Click on a selection to view product
Garmin Astro 220RAM-HOL-GA12U
Garmin BMW Navigator II & IIIRAM-HOL-GA9U
Garmin eTrex Legend Summit Venture & VistaRAM-HOL-GA5U
Garmin GPS 60RAM-HOL-GA12U
Garmin GPSMAP 176 176C & 196RAM-HOL-GA7U
Garmin GPSMAP 276C & 296RAM-HOL-GA7U
Garmin GPSMAP 376C 378 & 396RAM-HOL-GA7U
Garmin GPSMAP 478 & 496RAM-HOL-GA7U
Garmin GPSMAP 60 60C 60CS 60CSx & 60CxRAM-HOL-GA12U
Garmin Montana 600 650 650T 680 & 680TRAM-HOL-GA46U
Garmin nuvi 1300 1310T 1350 1350T 1370T. 1390 & 1390TRAM-HOL-GA34U
Garmin nuvi 1440 1450 & 1490TRAM-HOL-GA35U
Garmin nuvi 200 205 250 255 260 265T & 270RAM-HOL-GA24U
Garmin nuvi 200W 205W 250W 255W 260W 265W 265WT & 285WTRAM-HOL-GA25U
Garmin nuvi 220RAM-HOL-GA32U
Garmin nuvi 2450 2450LM 2460LT 2460LMT 2555LT & 2555LMTRAM-HOL-GA52U
Garmin nuvi 2455LMT 2475LT & 2495LMTRAM-HOL-GA25U
Garmin nuvi 2455LT 2455LMT 2475LT & 2495LMTRAM-HOL-GA34U
Garmin nuvi 30RAM-HOL-GA51U
Garmin nuvi 300 310 350 360 & 370RAM-HOL-GA21U
Garmin nuvi 3550LM & 3590LMTRAM-HOL-GA53U
Garmin nuvi 465TRAM-HOL-GA25U
Garmin nuvi 50 & 50LMRAM-HOL-GA50U
Garmin nuvi 500 510 & 550RAM-HOL-GA32U
Garmin nuvi 600-680RAM-HOL-GA23U
Garmin nuvi 710 750 755T 760 765T 770 775T 780 & 785TRAM-HOL-GA26U
Garmin nuvi 800 850 855 860 880 & 885TRAM-HOL-GA30U
Garmin Quest & Quest 2RAM-HOL-GA15U
Garmin StreetPilot  i2 i3 & i5RAM-HOL-GA22U
Garmin StreetPilot 2610 2620 2650 2660 2720 2730 & 2820RAM-HOL-GA9U
Garmin StreetPilot c530 c550 c580 i2 i3 & i5RAM-HOL-GA22U
Garmin zumo 220RAM-HOL-GA32U
SPOT Satellite GPS MessengerRAM-HOL-SPO2U
SPOT Satellite Personal TrackerRAM-HOL-SPO1U
TomTom ONE 125 130 & 130sRAM-HOL-TO7U
TomTom ONE 2nd & 3rd EditionsRAM-HOL-TO4U
TomTom V2 & V3RAM-HOL-TO4U

Part Numbers

Our part number: GPS.05.646.10200.B
Manufacturer part number: GPS.05.646.10200/B


This Product Fits



Reviews (3)

Share your thoughts!

4.67 out of 5 stars

3 reviews

Let us know what you think...

What others are saying

  1. Paul

    Great Usablity ! I like the placement, install is


    I bought this in May, 2016.,. And my first ride was from near Sacramento, CA. to Twin Falls, ID. I missed my first major fork in the road due to the tinted sun, extra visor in my Nolan causes the screen plastic to darken.,. Go figure, I discovered my detour after 17 miles of Feather River Highway cruising. .,. headed to Lassen National Park.
    I do not use the rear perforations for my Garmin 2795, a 5″ GPS screen.
    As has been said I am thrilled by this product. Install is straight forward, windshield R&R for the bracket. Which gives you MORE FINGER Room to clean under the fairing part of my ’13 Strom.! A good thing. On my bike at least the SWMotech cloth label hangs down, right into my line of sight for my dash, and my idiot lights.
    It is staying on my V-Strom though.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. mathmedic



    I bought the Sw-Motech Vibration damped Gps Holder this month and I can say that I am very happy with it! Only suggestion would be to install your gps mount (in my case the Zumo 660) to the bracket BEFORE putting it all together, it will save you a lot of time 🙂 this product places my GPS in my natural line of sight and reduces my need to look away from the road. I Have yet to take it off road, but it feels sturdy enough to do it.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. JAL

    Where you need it.


    This works great for me. It puts the GPS right in front where you can see it. It does not block your path of view, but does place it where you can see it without taking your eyes off the road. It’s adjustable and has rubber vibration isolators. Easy to remove and install when you stop for fuel or food. Ram makes cradles that screw on to the mount. I have one for my Garmin 265.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...




A link to set a new password will be sent to your email address.

Your personal data will be used to support your experience, manage access to your account, and for other purposes in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up