Rowe Electronics PDM60-P13 – Power Distribution Module with User Programmable with Cable
This product is no longer available.
Description
Please Note: This product is no longer available for purchase.The future of power management......... is here.
The old methods of power distribution have gone the way of the floppy disk (remember those?).
No more checking or replacing fuses or installing relays for powering high amperage electronics.
The PDM60 Power Distribution Module has 6 power circuits making it easy to handle all your gadgets and farkles.The bright LED indicators keep you inf... read more
-
Brand: Rowe ElectronicsQuestions? Call 1-855-255-5550 or contact our sales team
Closeout
- Description
- Part Numbers
- Resources
- Add a review
Description
The future of power management……… is here.
The old methods of power distribution have gone the way of the floppy disk (remember those?).
No more checking or replacing fuses or installing relays for powering high amperage electronics.
The PDM60 Power Distribution Module has 6 power circuits making it easy to handle all your gadgets and farkles.The bright LED indicators keep you informed of the status of each circuit.
The PDM60:
- Makes adding or removing aftermarket electrical devices / electronics (farkles) to your bike a breeze.
- Is simple to install and simple to use.
- Connects directly to the battery on your bike.
- Has 6 power circuits to handle all your farkle needs.
- Has bright LED indicators to keep you informed of the status of each circuit.
- Eliminates the need to check or replace fuses.
- Eliminates the need to install relays for powering high amperage electronics.
The PDM60 has been built with components selected for superior power management capability and extended service life. It’s designed with one goal in mind: to provide years and years of superior hassle free performance. The PDM60 unit is fully encapsulated to protect against rain dust humidity etc. Whether it’s off-road or cross-country via interstate these units are built to last under the harshest of conditions..
Physical dimensions: 2”H x 3”W x .9”D; about the size of a business card and less than an inch thick
6 indicator lights: The LEDs indicate the condition of the circuit.
- GREEN you’re good.
- ORANGE it’s an inactive or unused circuit or has been interrupted due to an intermittent fault condition.
- RED you have an existing fault on the circuit and the power has been interrupted.
Connecting to the unit: The PDM60 comes with a Posi-Lock connector for each circuit and the ground trigger. There’s also a Posi-Tap for connecting the ignition trigger wire. There’s one lead per circuit two trigger wires and the main power and ground leads. This makes the installation of the PDM60 a breeze and allows for custom fitting the unit to your vehicle. Compact & easy.
A fuse in the power wire is not required and would yield no additional benefit. The PDM60 is essentially a self monitoring digital fuse/breaker itself. The PDM60 has 60 Amps of power handling capability. Load it up.
For items requiring more than 15Amps: A 20A capable circuit (circuit #5) can be used to power intermittent applications like Stebel horns etc. The 20A
circuit is recommended for intermittent use only. If 20A is not enough you can also run parallel circuits. You utilize two (or three) of the circuits (i.e. two 15A circuits=30A) to power your device. You just connect multiple circuit leads to your device power lead ground your device to the frame or other suitable ground point and you’re up and running fully protected. Keep in mind that any load will be split equally among the circuits used so each of the circuits used must be able to its portion of the total load. i.e. two circuits 50% of total load each.
CAN type electrical systems: The unit is completely CAN type system compatible.
Programmable: The PDM60 is fully programmable. The dashboard software (free download) allows you to configure individual circuit behavior with a Windows compatible PC with .NET Framework 4 installed. There are 8 different triggering mode options for each circuit and you can set delay activation / and delay off time periods as well as individual circuit current limits. Configuration changes are a breeze to set up. The dashboard is easy to install and easy to use. You can update/change your settings whenever you want.
Special Note: To program the PDM60 a Windows compabitle PC with .NET Framework 4 installed is required.
Part Numbers
Our part number: | PDM60 |
Resources
Related products
Oxford Underseat Tool Kit
Not currently available to order
-
Closeout Sale
Rechargeable LED Inspection Light
In stock
$139.00 USD Add to cart
-
Klim Arsenal Tool Pak
Not currently available to order
-
Closeout Sale
0 reviews with a 4-star rating
There are no reviews with a 4-star rating yet