Shortened 1-In. Sidestand | Kawasaki KLR650 ’08-’11 & KLR650 ’14-’18

STS.08.810.10000.B
  • Shortened 1-In. Sidestand | Kawasaki KLR650 ’08-’11 & KLR650 ’14-’18
  • phpGx3Hg0
  • phpyHiCMr
  • phpPPH52C
  • php0kg6k2
  • Shortened 1-In. Sidestand | Kawasaki KLR650 ’08-’11 & KLR650 ’14-’18
  • phpGx3Hg0
  • phpyHiCMr
  • phpPPH52C
  • php0kg6k2

 This product is no longer available.

Description

Super-strong steel construction features typical German design and high engineering standards. Superb integration with the factory exhaust and sidestand components -- retain all existing features without sacrificing lean angle or clearances. read more

-

Brand:
SKU:
STS.08.810.10000.B
Category:
Brand:
SW-MOTECH
Tag:
Weight:
1.0803 lbs
Dimensions:
1 × 1 × 1 in
view all details
Brand:

Closeout

Description

All hardware needed to mount the sidestand is included. Installs using basic hand tools. No welding cutting or drilling of existing frame or body parts required. Tough powdercoated black finish. Designed to work with OEM components – we cannot assure fit with aftermarket exhausts or other accessories. Sidestand bolt is larger for those model years but can be made to fit with some drilling.

Useful Installation Notes:


These two arrows illustrate the points on the kick stand mounting tab. This is where the two locating prongs on the cover for the kickstand position sensor snap in.

These two prongs snap into the kick stand mounting tab on the KLR. The purpose of this cover is protect the kickstand position sensor. Use a 10 mm socket to remove the retaining bolt from this protective cover. Then pull the cover straight back to remove and the position sensor and the protective cover.

Part Numbers

Our part number: STS.08.810.10000.B
Manufacturer part number: STS.84.810.10000/B

Fitment

This Product Fits

Kawasaki

Resources

Reviews (4)

Share your thoughts!

3.5 out of 5 stars

4 reviews

Customer Questions and Answers

Ask a Question

0

Question: Does Twisted Throttle offer a larger foot pad to go on the shortened side stand? I ahve seem some on the internet for the stock stand but none that would fit the round pad on the TT shortened stand.
Answer this question

Let us know what you think...

2 reviews with a 3-star rating

  1. Andy

    Works...with caveats

    Andy

    I got this to replace my kickstand that bent, not because I needed a shorter one. Quality is on par with the stock one. Seems to be thin walled tubing like the stock so I would not say any sturdier. It is shorter and the bike kicks over more. I have the stock links on mine with an Eibach 550 spring.

    The quality is a little subpage as when the bike is resting on the sidestand the foot on the bottom is not flat on the ground, it’s at an angle minimizing surface contact and providing less support. That coupled with the fact that the foot is considerably smaller than the stock stand increases concern on effectiveness for a bike meant to be ridden off trail. It worked ok on hardpacked sand as you can see in the picture I have it parked in, but if it were even slightly damp or on hot asphalt there would be issues.

    The final issue is the for and ambiguity in title and description. I have a 2013. That’s not listed in the title. The last sentence in the description alludes to being able to make it fit, but is not clear as if being run through a translator.

    Here is my experience, the stand CAN fit, but you will have to remove the inside layer of powdercoat. You can use a drill, but do not have to and I would not recommend it as it may remove more than necessary. I used a Dremel and sanding drum. The drum was too big to fit in the hole, so I pulled the sandpaper to the edge of the drum and compressed it, working it into the hole as it spun. It slid into the hole and just a second or two removed enough to allow clearance for the bolt. Hope this helps.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Einherjar

    Did the trick (sort of).

    Einherjar

    I had my new 2014 KLR650 lowered with Moose Racing dogbones when I picked it up at the dealership. Thing is I cheaped out on having them shorten the stock sidestand an the same time, big mistake. So I went ahead and ordered the Twisted Throttle shortened sidestand to remedy that oversight.

    Some observations. First the hole for the pivot bolt really isn’t too small (at least on the 2014), it just had too much paint/powder coat in the hole. Clean the hole out with some sandpaper, apply some grease and you’re in business.

    Secondly, the foot on this sidestand is way too small for use on a dual sport bike. It’s only 1 3/8″ in diameter. That is something less than 1/3 the surface area of the stock sidestand foot. Without using a foot pad or modifying the foot, this would be for too risky to use on anything but solid pavement.

    If the foot had a larger surface area, this would be the exact solution for KLRs that have been lowered.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A link to set a new password will be sent to your email address.

Your personal data will be used to support your experience, manage access to your account, and for other purposes in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up