R&G Racing Kickstand Shoe | Triumph Tiger 800/XC ’10-’14 & Tiger 800 XR/XC
Description
Designed specifically for the Triumph Tiger 800 series ADV bikes the R&G Racing Sidestand Foot Enlarger significantly spreads the load applied by your motorcycle to help prevent the sidestand from sinking into hot asphalt dirt of any temperature or other soft surfaces. Simple bolt-on installation takes only minutes. Protect your valuable investment and save a little bit of pride the next time you park on dod
... read moreProduct Documents
Installation Instructions & Manuals
Questions? Call 1-855-255-5550 or contact our sales team
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
Designed specifically for the Triumph Tiger 800 series ADV bikes the R&G Racing Sidestand Foot Enlarger significantly spreads the load applied by your motorcycle to help prevent the sidestand from sinking into hot asphalt dirt of any temperature or other soft surfaces. Simple bolt-on installation takes only minutes. Protect your valuable investment and save a little bit of pride the next time you park on dodgy surfaces.
Features:
- Aluminum and stainless steel construction
- Bolt on design installs in minutes
- Does not affect ground clearance
- Will not interfere with drive systems
2010-2014 Triumph Tiger 800
2010-2014 Triumph Tiger 800 XC
2015-2016 Triumph Tiger 800 XR/XRx/XRt
2015-2016 Triumph Tiger 800 XC/
Part Numbers
Our part number: | RG.PKS0060.SI |
Replaces these SKUs: | RG.PKS0043.SI |
Manufacturer part number: | PKS0060SI |
Fitment
Resources
Product Documents
Installation Instructions & Manuals
You may also like…
Barkbusters Aluminum Bar Handguard Kit for Select Triumph Models
In stock
$109.95 USD Add to cart
Related products
SW-MOTECH Sidestand Foot Enlarger for BMW S1000XR ’15-’19
Not currently available to order
Closeout
GIVI ES5119 Kickstand Foot Print For BMW S1000XR ’15-’19
Low stock
$50.40 USD Add to cart
Sale
R&G Racing Kickstand Shoe for BMW S1000RR ’15-’18
Low stock
$59.99 USD Add to cart
asinop –
Bought 2 months ago. Used on an off-pavement, on inclines and declines, and the foot is great! Much more confident. does not interfere with the centerstand or stick out (in fact, my foot is more likely to catch the centerstand than this foot).
Simple install – used a little locktite just to make sure it stays. Perfect fit. Only complaint would be it is pricey – but certainly cheaper than a drop.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
jjbingham –
To be fair, this is the ONLY product I’ve purchased from Twisted Throttle in which I was disappointed. No matter how you mount the shoe it moves from side to side. The bolts were so soft that the heads stripped almost immediately. It’s also so thick that it alters the balance of the bike on the kick stand. I ended up having to drill out the bolts to get the thing off.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Elvis –
This is the third (and final) sidestand foot I’ve tried for my 2016 Tiger 800 XRT with the OEM centerstand. No interference (unlike the others). Better than that, it is simple and great quality. The foot itself is a thick piece of aluminum that is cut perfectly to fit snugly on the sidestand foot. The retaining plate on top fits perfectly, with three screws to hold it all together…a two minute installation. No looseness, no washers, nothing that can bend or come loose, no screws sticking through the bottom plate. The parts, while simple, are flawlessly machined.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Elvis –
This is the third (and final) sidestand foot I’ve tried for my 2016 Tiger 800 XRT with the OEM centerstand. No interference (unlike the others). Better than that, it is simple and great quality. The foot itself is a thick piece of aluminum that is cut perfectly to fit snugly on the sidestand foot. The retaining plate on top fits perfectly, with three screws to hold it all together…a two minute installation. No looseness, no washers, nothing that can bend or come loose, no screws sticking through the bottom plate. The parts, while simple, are flawlessly machined.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
River –
This R&G Kickstand shoe is a perfect fit on my 2015 Triumph Tiger XRx with a center stand. Does NOT interfere with the center stand in any way.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
River –
This R&G Kickstand shoe is a perfect fit on my 2015 Triumph Tiger XRx with a center stand. Does NOT interfere with the center stand in any way.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jack –
I had purchased a kickstand shoe from one of your competitors and couldn’t use it since I installed a centerstand. I cut, grinded and chopped but it still hit . I finally gave in and bought the R&G shoe and finally, Ive got something that fits like its supposed to with good clearance from the factory Triumph center stand. The R&G is made much better then Touratech which is now junk. Thanks Twisted Throttle for your great service and for having all the right stuff !
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal