R&G Racing Tail Tidy Fender Eliminator for BMW G310GS ’18-’19
This product is no longer available.
Description
Significantly enhance the appearance of your motorcycle with the R&G Tail Tidy fender eliminator for BMW G310GS. Injection molded construction is combined with a powder coated stainless steel plate holder for a better than factory original appearance that integrates perfectly with the OEM equipment. This sharp looking fender eliminator directly replaces the over-sized BMW plate holder/rear fender and repositions the t... read more-
Brand: R&GQuestions? Call 1-855-255-5550 or contact our sales team
Closeout
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
Significantly enhance the appearance of your motorcycle with the R&G Tail Tidy fender eliminator for BMW G310GS. Injection molded construction is combined with a powder coated stainless steel plate holder for a better than factory original appearance that integrates perfectly with the OEM equipment. This sharp looking fender eliminator directly replaces the over-sized BMW plate holder/rear fender and repositions the tag closer to the bodywork for a dramatic improvement in aesthetics. The original turn signals can be retained but upgrading to lower profile R&G LED indicators (sold separately) provides an even greater visual enhancement. Installation is straightforward as no permanent modifications are necessary. Shape up the rear-end on your BMW G310GS with a Tail Tidy from R&G!
How To Install an R&G Tail Tidy
Features:
- Directly replaces the over-sized factory license plate holder/rear fender
- Dramatically enhances overall aesthetics of the rear-end
- Re-positions the license plate closer to the bodywork
- Low-profile clear lens LED tail light with an LED plate light integrates perfectly
- Injection molded undertray with a powder coated black stainless-steel plate holder
- Compatible with OEM turn signals or upgraded R&G LED indicators – sold separately
- Straightforward installation with no permanent modifications necessary
What’s in the box:
- Stainless Steel LICENCE PLATE BRACKET (x1)
- LICENCE PLATE UNDERTRAY (x1)
- MINI INDICATOR ADAPTORS (x2)
- TOP HAT SPACERS (S1056 – 4.50mm LONG) (x1)
- TAIL LIGHT & SHROUD (x1)
- SELF-ADHESIVE CABLE CLIPS (x2)
- 150mm LENGTH OF HEATSHRINK (x3)
- REFLECTOR (x1)
- BULLET CONNECTORS (x4)
- COVER PLATE RIGHT (x1)
- COVER PLATE LEFT (x1)
- 16mm LONG BUTTON HEAD BOLTS (x2)
- M5 WASHERS (x4)
- M5 NYLOC NUTS (x2)
- LENGTHS OF SELF-ADHESIVE FOAM (x2)
- Install Instructions
2018-2019 BMW G310GS
Part Numbers
Our part number: | RG.LP0239BK |
Manufacturer part number: | LP0239BK |
Fitment
Resources
You may also like…
R&G Racing Micro LED Turn Signal Resistors (Pair, 21.5 Ohm Each)
In stock
$6.99 USD Add to cart
-
SW-MOTECH Crash Bars Engine Guards for Select BMW Motorcycles
Not currently available to order
-
Best Seller Closeout
R&G Racing Tail Tidy Replacement License Plate Light | DOT Approved
In stock
$22.99 USD Add to cart
-
Kaoko Throttle Stabilizer Cruise Control for BMW G310R ’17-’19 & G310GS ’18-’19 without Original Handguards
In stock
$144.99 USD Add to cart
-
R&G Racing Offset Cotton Reel Swingarm Spools for Select BMW Motorcycles
Low stock
$94.99 USD Add to cart
-
SW-MOTECH Front Axle Slider Kit For BMW G310R ’17-’19 & G310GS ’18-’19
Not currently available to order
-
Closeout
Related products
R&G Racing Tail Tidy Fender Eliminator for Kawasaki Versys-X 300 ’17-’19
Low stock
$124.99 USD Add to cart
-
R&G Racing Tail Tidy Fender Eliminator for Ducati Hypermotard 939 ’16-’18 & Hypermotard 821 ’13-’15
Special order
$127.99 USD Add to cart
-
R&G Racing Tail Tidy fender eliminator kit for select Triumph motorcycles
In stock
$141.99 USD Add to cart
-
Best Seller
ThatGuyInTenn –
The 310GS was trying to look like the bigger brothers, but just wasn’t hacking it. The 310GS fender mod makes the bike look much better. I removed the luggage rack also. The installation instructions are “pretty” good, but there were a few times the grainy photos didn’t really help. That said, the installation was done with simple tools that I had on hand and everything is working and looking nice.
Now…how about a kit to replace the duck-bill front fairing…!!!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
ThatGuyInTenn –
The 310GS was trying to look like the bigger brothers, but just wasn’t hacking it. The 310GS fender mod makes the bike look much better. I removed the luggage rack also. The installation instructions are “pretty” good, but there were a few times the grainy photos didn’t really help. That said, the installation was done with simple tools that I had on hand and everything is working and looking nice.
Now…how about a kit to replace the duck-bill front fairing…!!!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal