SW-MOTECH Center Stand for Suzuki V-Strom 1000 ’14-
This product is no longer available.
Description
Centerstands make chain maintenance oil changes and roadside tire repair much easier. It’s also much more convenient packing and unpacking your luggage when your bike is level. To keep your sporting edge SW-MOTECH centerstands are tested to make sure they do not limit the bike’s maximum lean angle or ground clearance.
read more-
Brand: SW-MOTECHQuestions? Call 1-855-255-5550 or contact our sales team
Best Seller Closeout
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
- Steel construction
- Retension spring
- Powder coated gloss black finish
- Allows maintenance in any location
- Foot lever for deployment leverage
Twisted Throttle Tech Tips: Center Stand Installation Explained
Fitment Notes2014-2016 Suzuki V-Strom 1000
2018-2019 Suzuku V-Strom 1000
2018 Suzuku V-Strom 1000 XT
Part Numbers
Our part number: | HPS.05.440.10000B |
Manufacturer part number: | HPS.05.440.10000/B |
Fitment
Resources
You may also like…
R&G Racing Stainless Steel Radiator Guard for Select Suzuki Motorcycles
Low stock
$118.99 USD Add to cart
-
Related products
SW-MOTECH Center stand BMW F650CS Scarver ’02-’06
Not currently available to order
-
Closeout
SW-MOTECH Centers tand Honda VT125C Shadow ’98-’06
Not currently available to order
-
Closeout
SW-MOTECH Center stand hand lever Honda XL1000V Varadero
Not currently available to order
-
Closeout
14 vstrom –
Install on my 2014 V strom 1000 was easy. Fit and finish is excellent.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Louie –
The stand was a good up grade tom my bike, for a couple reasons. The first and most useful, lubing the chain. It also comes in handy when I, wash the bike and a must for rear tire change.
The stand tucks away nice when not in use. Nothing hanging down , or in the way. Deploying the stand is easy, just stand the bike up straight and step on the pedal. When the stand retracts, it’s nice and smooth and the rubber stop prevents any clanking or banging. Seems well thought out and built. Now with that said, I wan’t to add the skid plate to the bottom of the bike. But, it looks like it mounts to the same spot in the rear, as the center stand. Maybe longer bolts are the answer?
Installing the center stand was easy, in all it took me 45 minutes to an hour. That included time to lay out all the parts, get all the tools required, and read the instructions over a couple of times.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Motosapien –
Installed without trouble. Have some grease on hand for the pivots and thread locker for the bolts as recommended. Attach the small spring first, then the larger. This stand lifts the bike easily.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
fred –
i bought this a month ago i wish i could send back for a 650 v strom fred
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
The Boog –
Very easy install
Just as advertised
Great Product
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Kenny –
Went together flawlessly. Only dissatisfaction was with the foot lever being too close to the factory passenger foot bracket. Makes lifting on center stand unpleasant. Definitely a design flaw.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
mitch –
Great product–Great service —
good people to work with—Thanks!!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Spyder –
Excellent quality and fitament.
A few dollars cheaper than OEM and faster delivery time.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Luckymule –
The center stand is the first accessory purchase for my 2025 V-Strom 1000 and I’m very pleased. The center stand should be included from the factory to facilitate drive chain and tire maintenance.
This product was simple to install with basic hand tools and it works perfectly. As usual, buying from Twisted Throttle was a pleasant experience with fast shipping!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Patsfun62 –
Like previous riders have said the foot pad is small to get your foot on to push the stand down. It’s just very close to the passenger peg. But that helps with cornering clearance while I bust up those curves on my new 2014 Vstrom 1000 Adventure!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Cheapb –
Easy install, great center stand! Works great with my ’14 DL1000!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Nik –
Just installed this on my 14′ VStrom Adventure. Installation was quick and simple. Has a nice wide footprint and keeps the bike perfectly stable. My only gripe (really not that bad) is that the “foot lever” tucks up a little too close to the passenger peg. Good that it conceals itself against the bike (doesn’t leave anything out in the open), but can be a little fidgety when trying to deploy it for those of us that have hefty boots on.
Great material quality and construction, I could see this lasting a really long time!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
MCMANN –
Installed in minutes with easy to follow instructions. I prefer the tucked in location of the foot pad (up location) to allow more lean angle clearance and to prevent your calf from making contact with your feet down etc. Very well designed!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
EGreen –
Overall very nice. Only minor issue is that the foot pad to push down on the stand is very close to the passenger peg which causes foot to slip off first couple of attempts every time. (2014 Vstrom 1000) Also, pay careful attention to the bolt, washer and nut combinations. Easy to mess up.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Phatguy –
I consider a center stand an essential motorcycle option. SW Motech hit a home run with this one. Installation was a 15 min. job after I read the clear directions and assembled the required simple hand tools. I found I didn’t need the spring installation tool. I used a short length of 1/2 inch steel tube for my install tool. My 500 plus lb Vstrom goes up on the stand effortlessly. Bike luggage weight does not seem to make any difference to ease of opperation. I recommend this item to any 2014 Vstrom 1000 owner looking for a reasonably priced quality center stand.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal