SW-MOTECH Center Stand with Foot Lever Arm for Kawasaki KLR650 ’08-’18
This product is no longer available. See currently available similar items:
Description
The SW-MOTECH Center Stand with Foot Lever Arm is a must-have accessory to ease basic chain maintenance tire changes parking and bike cleaning. This center stand includes a foot lever arm to aid in raising the bike off of the ground. read more-
Product Documents
Installation Instructions & Manuals
Questions? Call 1-855-255-5550 or contact our sales team
Closeout
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
- Steel construction
- Double retraction spring
- Powder coated gloss black finish
- Allows maintenance in any location
- Foot lever for deployment leverage
IMPORTANT NOTE!
When using this center stand the sidestand must be in the down (extended) position.
Special Note: We do not recommend installing center stands on bikes with a lowered rear suspension because use on a lowered bike may result in:
- Ground clearance & cornering clearance problems and
- Difficulty in lifting the lowered bike onto the center stand.
Twisted Throttle Tech Tips: Center Stand Installation Explained
Behind the Tech: SW-MOTECH’s Torture Tested KLR Gear
Part Numbers
Our part number: | HPS.08.473.10000 |
Replaces these SKUs: | HPS.08.364.100 |
Replaced by these SKUs: | HPS0847310001B |
Manufacturer part number: | HPS.08.473.10000/B |
Fitment
Resources
Product Documents
Installation Instructions & Manuals
Related products
SW-MOTECH Center stand for Suzuki DL1000 V-Strom & Kawasaki KLV1000
Not currently available to order
-
Closeout
SW-MOTECH Center stand Yamaha TDM850 ’95-’01
Not currently available to order
-
Closeout
SW-MOTECH Center Stand for Yamaha XT600 ’84-’03
Not currently available to order
-
Closeout
Gowelch –
This is a great product and installs in minutes.. it’s great to have the bike on a stand with kids running around in the garage
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
JasonC –
Works awesome to lube the chain on my bike or any other maintenance
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
KLRman –
This KLR stand is fantastic. The installation was very easy as long as you have a second pair of hands to hold the bike upright. The stand is very secure and stable when unfolded and doesn’t rattle around when up. I feel confident in it’s build that I ride right off the stand without putting my feet down. It is also easy to stand the bike up from being on the side stand. Also don’t bother buying the $50 hand grip, the passenger handles work fine
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Eric –
This is the first mod I made to the Klr and the most practical. Went on no problems! Makes it easy to check fluids and change tires. Made it super easy to install saw motech crash bars . While up on the center stand you just shim the back tire and you get no drop when removing sub frame bolts. Very useful addition. I love it. Would definetly recommend.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
KLR center stand –
Purchased for my son’s KLR to help in routine maintenance.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
nosnibor –
Easy to install, lever is a little hard to get to though. Better have good shoes on when using. Should come with handle to assist without having to buy it
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
myklr650 –
I got this installed in under 20 minutes, super easy, works great, just pay attention to bolt length, the long ones go on the right side. And for some reason I got two springs, one big one little, I only used the big one, not sure if I was supposed to use both.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Marc –
Easy install. I’m not sure why I waited this long to buy one! Makes working on my 2010 KLR 650 that much easier.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
DHall –
Does what it says. Easy install, seems solid. Shipping with twisted has been great for everything I’ve ordered so far.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
15cherries –
called and asked a few questions and the employee was very helpful, fast shipping and exactly as advertised!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
MacGyver 81 –
Just installed this, simple and easy installation. You don’t have to buy the expensive spring tool. I used a phillip’s head screw-driver, put the hook of the spring on the shaft, then put the tip on the knob that holds the spring and applied rearward pressure until the spring slid across the shaft onto the spring retention knob. The spring took 5 seconds. I do recommend the lifting handle. As you all know the KLR is a heavy bike. I have to stand with my right foot on the stand, right hand on the lifting handle and left hand on the cross-bar between handle-bars and lift back and rear.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Peck –
Easy install, works great, and you can now center stand your bike! Twisted Throttle rocks!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Will S –
I installed the CenterStand in about 45 minutes, the pictures made it very easy to install. I have been using it and while parking I get attention from other riders.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Bret –
Just what I needed to get this beast’s rear wheel of the ground so I can lube the chain.
Very easy install and pretty much invisible, great product as I think there was definitely some good engineering involved in fitting this to the KLR650 (mine is a 2015)
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
B2RAD –
I found that this product was very easy to install, maybe 20 minutes. I have no issues with cornering at all, the center stand has more clearance on turns than the side stand. I love how easy it is to adjust and lube the chain. I would definitely recommend this product to anyone.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dallas –
Great looking workmanship. Went on easily. Even the spring wasn’t as difficult as I feared.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
KLRLarry –
This is a great product! It is well made, has a great finish and was easy to install. The instructions were easy to follow, and the center stand works extremely well for my 2008 KLR 650.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
boog –
I was impressed with the construction quality, fit and finish of this center stand. The only challenge was attaching the springs without the custom tool for this purpose. I used a screwdriver and after a few attempts, succeeded in my effort. Probably took an extra 5 minutes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
KLR_VT –
Easy to install and rugged without losing much ground clearance. Since I also have old Motech crash bars through the foot peg bolts I bought stainless steel 40mm bolts in place of the supplied bolts.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal