SW-MOTECH Center Stand Suzuki V-Strom 650 & 650XT ’12-’19
This product is no longer available.
Description
The must-have accessory for sport-touring! Greatly eases basic chain maintenance tire changes parking and bike cleaning. Super-strong steel construction features typical German design and high engineering standards. Superb integration with the factory exhaust and sidestand components—retain all existing features without sacrificing lean angle or clearances.
read more-
Brand: SW-MOTECHQuestions? Call 1-855-255-5550 or contact our sales team
Best Seller Closeout
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
All hardware needed to mount the center stand included. Typically installs using basic hand tools. No welding cutting or drilling of existing frame or body parts required. Tough black powder-coated finish with some gray fittings or hardware as applicable. A double-retention spring is included as a safety feature to prevent the centerstand from contacting pavement if one of the two springs should fail during a ride. Designed to work with OEM components — we cannot assure fit with aftermarket exhausts or other accessories.
Special Note: This center stand does not fit the ’04-’10- DL650. For the ’04-’11 V-strom center stand please order HPS.05.257.100.
- Will fit with Touratech skidplate.
- Does not fit with the Hindle Exhaust System part number VS650HSS.
- Does not fit with the Yoshimura Exhaust System part numbers 1162040220 or 1162040520.
Special Note: We do not recommend installing centerstands on bikes with a lowered rear suspension because use on a lowered bike may result in:
- Ground clearance & cornering clearance problems
- Difficulty in lifting the lowered bike onto the centerstand
Twisted Throttle Tech Tips: Center Stand Installation Explained
Part Numbers
Our part number: | HPS.05.764.10000.B |
Manufacturer part number: | HPS.05.764.10000/B |
Fitment
Resources
You may also like…
SW-MOTECH Crash Bars Engine Guards for Suzuki DL650 V-Strom ’12-’19 & V-Strom 650XT ’15-’19
Not currently available to order
-
Best Seller Closeout
SW-Motech Aluminum Engine Guard Skid | Suzuki DL650 V-Strom and V-Strom 650XT
Not currently available to order
-
Best Seller Closeout
SW-MOTECH Light Mount Kit| Suzuki V-Strom DL650 ’12-’16, 650XT ’15-’16
Not currently available to order
-
Closeout
Kaoko Throttle Stabilizer Cruise Control to fit Select Honda & Suzuki Motorcycles with Barkbusters or SW-MOTECH Handguards
In stock
$144.99 USD Add to cart
-
SW-MOTECH Chain Guard for Suzuki V-Strom 1000 / 1000XT / 650 / 650XT
Not currently available to order
-
Closeout
R&G Racing Radiator Guard for Suzuki V-Strom DL650/XT
In stock
$84.99 USD Add to cart
-
Related products
SW-MOTECH Center stand Yamaha TDM850 ’95-’01
Not currently available to order
-
Closeout
SW-MOTECH Center stand Honda 919 / CB900 Hornet ’01-’05
Not currently available to order
-
Closeout
SW-MOTECH Center stand Honda XL1000V Varadero, ’01-’11
Not currently available to order
-
Closeout
Tooldev –
It installed in under an hour, and is a great addition to the bike. I struggled a bit installing a screw hidden behind the exhaust on the right side of the bike but was able to get it in with a socket extension.
I always use the center stand to fill up and clean the chain.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dyoung1987 –
This is a sturdy and well built center stand. My 2012 Vstrom sits very solid when up on the stand
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
7kita –
The installation is easy but removing original bolts is challenging. The center stand is necessary tool for many maintenance tasks. Especially on long trips. Very happy with quality.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Spinnerbait –
Of all the center stands I’ve had on many different bikes the SW is the highest quality and take less effort to use.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
1Scorpion –
This is the second centerstand I purchased from Twisted Throttle. I had one on my 09 V-Strom 650. So when I got the latest V-Strom 650 , 2015 abs model. I knew what I wanted.
I found the quality is top shelf. It took less than 20 min. to install and works flawlessly.
Even though the instructions were in German there are enough pics to make it simple. I used a old tool for doing drum brakes to install the spring.
I’m very happy with the service I get from Twisted Throttle.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dave –
Received the package yesterday 3/10 and was going to wait until I had a couple extra hours to spend installing. Once parts were laid out decided to go for it,took less than an hour. Fortunately had some threadlock in the tool box for the bolt installation. Fits great and works great. OK, I did scratch the stand installing the spring with a screwdriver and found hooking both on the plate end and then one spring at a time on the stand stud worked best.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Markman –
This is a top-quality center stand better than the factory very well-made it’s really nice for maintenance you can pull both of the rims off of the bike just bounces evenly on the center stand another great product by SW
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
MTSPTMAN –
Bought this after much inner debating about which way to go and have not been disappointed at all. Super strong, easy to install, and so smooth to use. I read different reviews saying so many different things but for my part on my 13′ Vstrom 650 there was no difficulties installing it. I have only rode dirt roads so far but no issues with it staying put either. Makes parking in the garage, filling gas tank, and loading the bike so much easier.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
TomH –
I like this center stand. It is made well and works with my engine skid. Install was very easy.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dan –
Typical Motech high quality and all necessary hardware for the 2017 model is included.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
RubySoho –
My SW centre stand was easy to install on my V Strom took me just short of about 45 minutes with a bit of work with regard to some tight to get at fastener spots. I would definitely recommend this product, well engineered, quality material and opens up so many opportunities for me for maintenance and for safety parking my bike.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Tguy –
This is not the first product I’ve bought from you, and I’m pleased with the purchase! Thank you .
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal