SW-MOTECH Center Stand Suzuki V-Strom 650 & 650XT ’12-’19

HPS.05.764.10000.B
  • SW-MOTECH Center Stand Suzuki V-Strom 650 & 650XT ’12-’19
  • phpWSS4Ki
  • phpWSS4Ki
  • phpUdjXfF
  • phpUdjXfF
  • phpUdjXfF
  • phpYEgsP5
  • phpYEgsP5
  • phpYEgsP5
  • phpoDjAfm
  • phpoDjAfm
  • phpoDjAfm
  • phpWSS4Ki
  • phpWSS4Ki
  • phpWSS4Ki
  • phpUdjXfF
  • phpUdjXfF
  • phpUdjXfF
  • phpYEgsP5
  • phpYEgsP5
  • phpYEgsP5
  • phpoDjAfm
  • phpoDjAfm
  • phpoDjAfm
  • SW-MOTECH Center Stand Suzuki V-Strom 650 & 650XT ’12-’19
  • phpWSS4Ki
  • phpWSS4Ki
  • phpUdjXfF
  • phpUdjXfF
  • phpUdjXfF
  • phpYEgsP5
  • phpYEgsP5
  • phpYEgsP5
  • phpoDjAfm
  • phpoDjAfm
  • phpoDjAfm
  • phpWSS4Ki
  • phpWSS4Ki
  • phpWSS4Ki
  • phpUdjXfF
  • phpUdjXfF
  • phpUdjXfF
  • phpYEgsP5
  • phpYEgsP5
  • phpYEgsP5
  • phpoDjAfm
  • phpoDjAfm
  • phpoDjAfm

 This product is no longer available.

Description

The must-have accessory for sport-touring! Greatly eases basic chain maintenance tire changes parking and bike cleaning. Super-strong steel construction features typical German design and high engineering standards. Superb integration with the factory exhaust and sidestand components—retain all existing features without sacrificing lean angle or clearances.

read more

-

Brand:
SKU:
HPS.05.764.10000.B
Categories:
, ,
Brand:
SW-MOTECH
Tag:
Weight:
8.1571 lbs
Dimensions:
1 × 1 × 1 in
view all details
Brand:

Best Seller Closeout

Description

All hardware needed to mount the center stand included. Typically installs using basic hand tools. No welding cutting or drilling of existing frame or body parts required. Tough black powder-coated finish with some gray fittings or hardware as applicable. A double-retention spring is included as a safety feature to prevent the centerstand from contacting pavement if one of the two springs should fail during a ride. Designed to work with OEM components — we cannot assure fit with aftermarket exhausts or other accessories.

Special Note: This center stand does not fit the ’04-’10- DL650. For the ’04-’11 V-strom center stand please order HPS.05.257.100.

  • Will fit with Touratech skidplate. 
  • Does not fit with the Hindle Exhaust System part number VS650HSS.
  • Does not fit with the Yoshimura Exhaust System part numbers 1162040220 or 1162040520.

 

Special Note: We do not recommend installing centerstands on bikes with a lowered rear suspension because use on a lowered bike may result in:

  • Ground clearance & cornering clearance problems
  • Difficulty in lifting the lowered bike onto the centerstand

Twisted Throttle Tech Tips: Center Stand Installation Explained

Part Numbers

Our part number: HPS.05.764.10000.B
Manufacturer part number: HPS.05.764.10000/B

Fitment

This Product Fits

Suzuki

Resources

Reviews (52)

Share your thoughts!

4.96 out of 5 stars

52 reviews

Let us know what you think...

What others are saying

  1. Tooldev

    Works well

    Tooldev

    It installed in under an hour, and is a great addition to the bike. I struggled a bit installing a screw hidden behind the exhaust on the right side of the bike but was able to get it in with a socket extension.
    I always use the center stand to fill up and clean the chain.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Dyoung1987

    Great center stand

    Dyoung1987

    This is a sturdy and well built center stand. My 2012 Vstrom sits very solid when up on the stand

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. 7kita

    The must have tool!

    7kita

    The installation is easy but removing original bolts is challenging. The center stand is necessary tool for many maintenance tasks. Especially on long trips. Very happy with quality.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Spinnerbait

    It's worth it.

    Spinnerbait

    Of all the center stands I’ve had on many different bikes the SW is the highest quality and take less effort to use.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. 1Scorpion

    V-Strom 650 Centerstand

    1Scorpion

    This is the second centerstand I purchased from Twisted Throttle. I had one on my 09 V-Strom 650. So when I got the latest V-Strom 650 , 2015 abs model. I knew what I wanted.
    I found the quality is top shelf. It took less than 20 min. to install and works flawlessly.
    Even though the instructions were in German there are enough pics to make it simple. I used a old tool for doing drum brakes to install the spring.
    I’m very happy with the service I get from Twisted Throttle.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Dave

    Easy Install on 2012 DL650A

    Dave

    Received the package yesterday 3/10 and was going to wait until I had a couple extra hours to spend installing. Once parts were laid out decided to go for it,took less than an hour. Fortunately had some threadlock in the tool box for the bolt installation. Fits great and works great. OK, I did scratch the stand installing the spring with a screwdriver and found hooking both on the plate end and then one spring at a time on the stand stud worked best.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. Markman

    It’s a must have for any Motorcycle

    Markman

    This is a top-quality center stand better than the factory very well-made it’s really nice for maintenance you can pull both of the rims off of the bike just bounces evenly on the center stand another great product by SW

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. MTSPTMAN

    Great Fit & Function

    MTSPTMAN

    Bought this after much inner debating about which way to go and have not been disappointed at all. Super strong, easy to install, and so smooth to use. I read different reviews saying so many different things but for my part on my 13′ Vstrom 650 there was no difficulties installing it. I have only rode dirt roads so far but no issues with it staying put either. Makes parking in the garage, filling gas tank, and loading the bike so much easier.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. TomH

    Good product

    TomH

    I like this center stand. It is made well and works with my engine skid. Install was very easy.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. Dan

    Perfect Fit !

    Dan

    Typical Motech high quality and all necessary hardware for the 2017 model is included.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  11. RubySoho

    Easy to install solid as a rock

    RubySoho

    My SW centre stand was easy to install on my V Strom took me just short of about 45 minutes with a bit of work with regard to some tight to get at fastener spots. I would definitely recommend this product, well engineered, quality material and opens up so many opportunities for me for maintenance and for safety parking my bike.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  12. Tguy

    Tguy

    This is not the first product I’ve bought from you, and I’m pleased with the purchase! Thank you .

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A link to set a new password will be sent to your email address.

Your personal data will be used to support your experience, manage access to your account, and for other purposes in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up