SW-MOTECH Center Stand Suzuki V-Strom 650 & 650XT ’12-’19

SKU:HPS.05.764.10000.B
  • phpWSS4Ki
  • phpWSS4Ki
  • phpUdjXfF
  • phpUdjXfF
  • phpUdjXfF
  • phpYEgsP5
  • phpYEgsP5
  • phpYEgsP5
  • phpoDjAfm
  • phpoDjAfm
  • phpoDjAfm
  • phpWSS4Ki
  • phpWSS4Ki
  • phpWSS4Ki
  • phpUdjXfF
  • phpUdjXfF
  • phpUdjXfF
  • phpYEgsP5
  • phpYEgsP5
  • phpYEgsP5
  • phpoDjAfm
  • phpoDjAfm
  • phpoDjAfm
  • phpWSS4Ki
  • phpWSS4Ki
  • phpUdjXfF
  • phpUdjXfF
  • phpUdjXfF
  • phpYEgsP5
  • phpYEgsP5
  • phpYEgsP5
  • phpoDjAfm
  • phpoDjAfm
  • phpoDjAfm
  • phpWSS4Ki
  • phpWSS4Ki
  • phpWSS4Ki
  • phpUdjXfF
  • phpUdjXfF
  • phpUdjXfF
  • phpYEgsP5
  • phpYEgsP5
  • phpYEgsP5
  • phpoDjAfm
  • phpoDjAfm
  • phpoDjAfm

Description

The must-have accessory for sport-touring! Greatly eases basic chain maintenance tire changes parking and bike cleaning. Super-strong steel construction features typical German design and high engineering standards. Superb integration with the factory exhaust and sidestand components—retain all existing features without sacrificing lean angle or clearances.

read more

Product Documents

SKU:
HPS.05.764.10000.B
Categories:
, ,
Brand:
SW-MOTECH
Weight:
8.15710369 lbs
view all details

Price

$231.95

Quantity

- +

Total

$231.95

Out of stock - more coming soon

- +

Best Seller

Description

All hardware needed to mount the center stand included. Typically installs using basic hand tools. No welding cutting or drilling of existing frame or body parts required. Tough black powder-coated finish with some gray fittings or hardware as applicable. A double-retention spring is included as a safety feature to prevent the centerstand from contacting pavement if one of the two springs should fail during a ride. Designed to work with OEM components — we cannot assure fit with aftermarket exhausts or other accessories.

Special Note: This center stand does not fit the ’04-’10- DL650. For the ’04-’11 V-strom center stand please order HPS.05.257.100.

  • Will fit with Touratech skidplate. 
  • Does not fit with the Hindle Exhaust System part number VS650HSS.
  • Does not fit with the Yoshimura Exhaust System part numbers 1162040220 or 1162040520.

 

Special Note: We do not recommend installing centerstands on bikes with a lowered rear suspension because use on a lowered bike may result in:

  • Ground clearance & cornering clearance problems
  • Difficulty in lifting the lowered bike onto the centerstand

Twisted Throttle Tech Tips: Center Stand Installation Explained

Fitment Notes

2012-2019 Suzuki DL650 V-Strom

2015-2019 Suzuki V-Strom 650XT

Part Numbers

Our part number: HPS.05.764.10000.B
Manufacturer Number: HPS.05.764.10000/B
GTIN13 / EAN Barcode: 4052572006948

Fitment

Fitment Associations

Year Make Model
Year Make Model
2012 - 2016 Suzuki V-Strom DL650
2015 - 2019 Suzuki V-Strom 650XT
2017 - 2019 Suzuki V-Strom 650
All Years Suzuki V-Strom 650
All Years Suzuki V-Strom 650XT
All Years Suzuki V-Strom DL650

Resources

Product Documents

Reviews (52)

Share your thoughts!

4.96 out of 5 stars

52 reviews

Let us know what you think...

What others are saying

  1. Jonathan

    Strong, simple, easy to install

    Jonathan

    Purchased this center stand & was expecting (based on previous experience with other center stands…not by Twisted Throttle) installation to be a real bear. I read the directions several times, did a “dry-fit”, and installed the centerstand in less than 30 minutes! Excellent product!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. oldfatDave

    Smooth installation

    oldfatDave

    I recently purchased an SW Motech centre stand for my new DL650. Delivery from TwistedThrottle was excellent. The stand itself is a very high quality unit. Everything fits smoothly. The instructions were clear and straight forward. If you have a carpenters awl and a long thin screwdriver you can install the spring easily. Best of all the stand lifts the bike with very little effort.
    I highly recommend this product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Loco Gringo

    Great Product Great Investment

    Loco Gringo

    As always SW-Motech products are what you want Great Products, Great Investment, Great Build Quality, and do exactly what their designed for. Always more than satisfied. Makes chain maintiance and tire service so easy. I highly recommend this product. Lay out the parts read the simple instructions watch the video that’s on Utube take your time it goes together smoothly less than 1 hour. Please buy one you will be very happy. I would like to also say as always with all my purchases of accessories over the years for different bikes Twisted Throttle is the best at Customer service and providing quality parts for the motorcycle lifestyle. Thank you.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. bete

    Easy to fit

    bete

    I have been using this for a while now, it’s really stable and bike goes up on it easy.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Brojon

    Slap it on

    Brojon

    No fidgeting. No mods necessary. It just went on exactly the way the instructions said it would. No special tools needed. Lots of folks will tell you you need a special spring tool – nonsense, just use a skinny screwdriver and it pops right on.
    This was literally a 40 minute install taking my sweet time.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. kailashtraveler

    Must have add-on for VSTROM 650

    kailashtraveler

    Very easy to install even w/o spring tool. Works as expected. Love it!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. blafoo

    Excellent Product

    blafoo

    Well engineered with clear instructions that made installation quite straightforward. The stand functions well, although the foot tang is difficult to get at with my size 12s. The only reason it didn’t get 5 stars was that it seems quite expensive for a centre stand (double what it cost to put one on my F6B), but others may have a different opinion on that. I didn’t purchase the special spring tool; it took one attempt and about 10 seconds to hook up the springs with a flat screwdriver.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. Photo shooter

    Work perfect

    Photo shooter

    Perfectly balanced goes on and off stand with ease !

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. mp183

    Easy as pie

    mp183

    Just layout the parts in numerical order like in the instructions. Pay attention to the thickness of the spacers and size of the washers.
    After that it’s a breeze. Have some locktite ready as well as some grease.
    This went on my new 2015, I have one on my 2004 that I installed 13 years ago and no issues.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. Lone Rider

    Great Centerstand

    Lone Rider

    Really love my SW-Motech Centerstand. Soooo easy to put the bike on the centerstand now. Not overly complicated to install either. On top of that, good service from the Twisted Throttle people.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  11. Steve

    Better Than The OE Stand

    Steve

    Just finished installing this stand on my wife’s 2012 V-strom. This is a well built piece of kit, excellent finish, quality hardware and far better than the stand that Suzuki offers for this bike. The instructions are well laid out and easy to follow. My wife’s bike has been lowered by 20 mm but even so it was effortless lifting her bike on the stand. Highly recommend.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  12. Argus16

    Convenient

    Argus16

    Really well made including the springs. Makes parking the bike so much more stable; chain maintenance is now a breeze. I’ve lost almost no clearance under the VStrom and is compatible with most skid plates.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  13. Tguy

    Tguy

    This is not the first product I’ve bought from you, and I’m pleased with the purchase! Thank you .

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  14. Bill

    Efficient solution!

    Bill

    Nicely engineered piece that raises the back tire off the ground with great balance. Makes it so easy to clean and lube the chain, and clean the back wheel without a jack. It would be difficult to jack the V-strom with the exhaust routing.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  15. RubySoho

    Easy to install solid as a rock

    RubySoho

    My SW centre stand was easy to install on my V Strom took me just short of about 45 minutes with a bit of work with regard to some tight to get at fastener spots. I would definitely recommend this product, well engineered, quality material and opens up so many opportunities for me for maintenance and for safety parking my bike.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  16. Dan

    Perfect Fit !

    Dan

    Typical Motech high quality and all necessary hardware for the 2017 model is included.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  17. TomH

    Good product

    TomH

    I like this center stand. It is made well and works with my engine skid. Install was very easy.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  18. MTSPTMAN

    Great Fit & Function

    MTSPTMAN

    Bought this after much inner debating about which way to go and have not been disappointed at all. Super strong, easy to install, and so smooth to use. I read different reviews saying so many different things but for my part on my 13′ Vstrom 650 there was no difficulties installing it. I have only rode dirt roads so far but no issues with it staying put either. Makes parking in the garage, filling gas tank, and loading the bike so much easier.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  19. Markman

    It’s a must have for any Motorcycle

    Markman

    This is a top-quality center stand better than the factory very well-made it’s really nice for maintenance you can pull both of the rims off of the bike just bounces evenly on the center stand another great product by SW

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  20. Dave

    Easy Install on 2012 DL650A

    Dave

    Received the package yesterday 3/10 and was going to wait until I had a couple extra hours to spend installing. Once parts were laid out decided to go for it,took less than an hour. Fortunately had some threadlock in the tool box for the bolt installation. Fits great and works great. OK, I did scratch the stand installing the spring with a screwdriver and found hooking both on the plate end and then one spring at a time on the stand stud worked best.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  21. 1Scorpion

    V-Strom 650 Centerstand

    1Scorpion

    This is the second centerstand I purchased from Twisted Throttle. I had one on my 09 V-Strom 650. So when I got the latest V-Strom 650 , 2015 abs model. I knew what I wanted.
    I found the quality is top shelf. It took less than 20 min. to install and works flawlessly.
    Even though the instructions were in German there are enough pics to make it simple. I used a old tool for doing drum brakes to install the spring.
    I’m very happy with the service I get from Twisted Throttle.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  22. Spinnerbait

    It's worth it.

    Spinnerbait

    Of all the center stands I’ve had on many different bikes the SW is the highest quality and take less effort to use.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  23. 7kita

    The must have tool!

    7kita

    The installation is easy but removing original bolts is challenging. The center stand is necessary tool for many maintenance tasks. Especially on long trips. Very happy with quality.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  24. Dyoung1987

    Great center stand

    Dyoung1987

    This is a sturdy and well built center stand. My 2012 Vstrom sits very solid when up on the stand

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  25. SmilinJoe

    Great Centerstand

    SmilinJoe

    Easy install. Looks great on the bike. Looks like a factory centerstand.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  26. Keith

    Great service

    Keith

    I was very pleased with my experience with Twisted Throttle. The SW-Motech parts are always top notch and the delivery time was very acceptable.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  27. Diane

    Super Centerstand!

    Diane

    Needed it badly—-it was simple to install, and works perfectly. Easier to put the bike up than others I’ve had. I’m a very happy customer!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  28. JJHH

    High quality, good instructions, easy to use!

    JJHH

    I did a lot of internet research on center stands for my 2014 Suzuki Vstrom 650 and settled on the SW-Motech stand. The stand is top quality and the instructions are detailed and clear. You may want to read through them completely a couple of times before starting. It will also make the job easier if you CAREFULLY examine all the pieces and fasteners and sit each piece on its corresponding picture on the parts list. This way, as you go through the installation instructions, you can easily grab the EXACT piece you need, as there are several different fastener and sizes of spacers.Take your time and you will love the result. It is easy to get the bike up on the center stand, even for us older guys!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  29. christopher

    Smooth

    christopher

    Easy install and perfect fit, but one mounting bolt is a bit challenging to get to. Incredibly smooth to put on the stand once installed. By far the best center stand I have used.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  30. RideEveryDay

    Excellent Centerstand

    RideEveryDay

    The installation of the centerstand was straightforward and easy. The installation video shows you how to easily connect the springs without the optional spring installation tool. The quality of the product is excellent. I have used the OEM centerstand as well, and I feel that the SW-MOTECH centerstand is better (easier to put the bike up). The SW-MOTECH centerstand is also less expensive than the OEM centerstand.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  31. LostYooper

    Works great

    LostYooper

    This center stand was easy to install and works great. It is very easy to get my bike up on the stand and it sits on it solidly. When I push my bike off the stand it comes down smoothly. This stand just plain works perfectly.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  32. Stacy

    Great stand

    Stacy

    Easy to install and works great. Fit is excellent. I’m very happy with my purchase.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  33. Studad

    Easy Install, works well

    Studad

    The install wasn’t bad, just go slowly and double check the bolt lengths. There is one that’s in a tight spot, and you won’t want to have to pull it out and redo it.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  34. Les

    Overwhelming at first

    Les

    The package arrived right on time. Upon opening it I was a bit overwhelmed at the number of pieces (22 in all) and the fact that all of the wording that I initially saw was in german. However there were very clear pictures and diagrams that took me thru the assembly step by step and the whole centerstand went together and onto my Strom without a hitch. A perfect fit and of excellent quality materials and design. Worth ever penny.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  35. Bob

    Fit and Finish are SW-Motech quality

    Bob

    There is a reason most people view products from SW-Motech as the best. This centerstand for my 2013 V-Strom 650 bolted on with no issues whatsoever and compliments their engine guards perfectly. With such fast shipping and the advice of the “string” trick, this was the best way to go!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  36. EdW

    Easy Install

    EdW

    Install was easy and took an hour or less. No need for a special spring tool. Use a long heavy flat head screw driver with flat sides for plenty of leverage.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  37. actiongarrett

    Perfect Centerstand for the Glee

    actiongarrett

    I bought this product after oiling my chain once without a stand of any kind. lots of rolling the bike around. I was seriously considering purchasing a track stand, but it seemed like it would take up more room in the garage and be more difficult to use by myself.

    I only had one issue with installation (cross-threaded the forward/bottom bolt on shifter side behind the foot peg) not a lot of clearance for a socket allen. I would suggest starting the bolt with an allen key, and torquing it with the socket once it is fully in. I was able to to fix the issue by driving a shorter bolt from the other side to straighten the threads. This was in no way caused by the stand, but by the location of the predrilled hole on the Strom, and user ignorance.

    The stand works perfectly and feels very secure. I was a bit apprehensive the first time I used it as I had never used a center stand before, but I watched a few videos and discovered that by pressing down on the stand and using the passenger foot peg as a handle to pull straight up on the bike pops up very nicely with little apparent effort.

    Before purchasing this stand I was concerned about cornering clearance. I read somewhere that other stands require lengthening the left side peg feeler. I haven’t scrapped the pegs yet, but I like having that space just in case. There are no such issues with this stand. I don’t ride off road so i am not sure how it would affect ground clearance, but it doesn’t appear that it would cause any issues.

    I am impressed by the quality of SW Motech parts and will certainly be using them to continue improving my Strom

    Garrett

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  38. tomkioti

    just what the bike needed

    tomkioti

    Why the vstrom doesnt come with a center stand is beyond me. This one was easy to install and works great. Twisted throttle was super fast in getting it to me. Next day for free. Really?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  39. wrightpwx

    Installation tips

    wrightpwx

    Purchased stand for a new ’14 V-strom 650. Stand was very well made and comes with clear instructions. A few tips to help out during installation:
    1. Fine threaded bolts can get cross threaded easily- run bolt through hole before installation to clean out the threads.
    2. Right side bracket tolerance for the two mounting holes is very tight, be careful during installation (see number 1 above, you may want to ream the holes out a little if you have problems getting the bolts started)
    3. Upper Allen bolt on right side cannot be tightened using a normal Allen wrench. You will need a long ball head wrench to tighten the bolt. If you have a socket drive Allen bit you may be able to remove the bit and turn it with a regular crescent wrench.
    4. The double spring is very stiff but you can easily install it with brake spring pliers.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  40. Lapompe

    Real good product

    Lapompe

    Real good product .Now i can easy wash my bike and ajust greace my chain and tie my lugage .Every bike need it.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  41. Curt

    Must have for easy chain maintenance

    Curt

    Great add on to my V-Strom. Easy to install if you lay your parts out on the parts list provided. Probably took 30-45 mins. Did not need the spring tool, since a good screwdriver works well. The hardest part was learning how to get the bike up on the centerstand. Once you get the idea that you need to put all of your weight on the stand, the bike goes up on its own. Took a few times to figure it out. It made cleaning and tightening my chain so much easier. This should be stock on V-Stroms-come on Suzuki!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  42. handyman

    SW MOTECH CENTERSTAND SUZUKI 650 V STROM 2013

    handyman

    Stand was on back order for about 2 weeks but I knew that when I ordered it. I bought this brand due to reviews and so glad I waited to get it. Had no problem with install. I did have to clean the threads out on bike due to having 6000 miles on it and they had dirt and chain crud in them. Stand is very well made and fits like a glove. Tucks up high when up. The brackets hang down about 1/4 inch below the skid plate I have. I don’t plan on slamming bike over logs and rocks so its not an issue for me. Stand holds bike very securely. I have clam shell style saddle bags and it is easier to put things in left bag with bike standing up straight. Stand will make chain maintenance much easier on longer trips. I did use a swing arm stand on spools at home but that was in the way a bit. Main stand is the ticket. You wont be disappointed.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  43. SECoda

    SW-Motech Center Stand for 2013 Vstrom DL650A

    SECoda

    High quality among the center stands offered out there. Very well made and operates well. It took about 30 minute to install. Nearly required for proper chain maintenance. I use a wax lube frequently and this makes it very easy.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  44. BusyBob

    Solid!

    BusyBob

    Installed on 2015 650 V-StromXT
    This was not overly difficult to install. If you follow the instructions and have the proper tools, it should take about 20 minutes.
    SW-Motech products are unquestionably expensive, but they are well made, and work as they should. You get what you pay for.
    I would recommend this upgrade.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  45. Paul

    Perfect Fit-Highest Quality-Excellent Instructions

    Paul

    I bought this for my ’13 Suzuki DL 650 V Strom. Quick shipment. Wrapped and boxed to be bomb proof. It was a perfect fit. The instructions were not in english but the pictures provided exactly what you needed when you needed it. I suggest you read over the instructions before you start though. Pieces must fit by the order of the steps listed. Also, long T-handle metric allen’s are a plus. Took me 20 minutes total.
    I searched several sites for a centerstand. I compared costs. This IS the best deal.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  46. Jim

    Great product! So easy to install!

    Jim

    Very well made and a great help for maint. on the bike.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  47. Beemer02

    A great Centerstand!

    Beemer02

    Ordered the SW-Motech stand from Twisted Throttle and it arrived in four days. The stand was packaged in enough bubble wrap to send a dozen eggs on a RTW trip, in other words, it was packaged extremely well. Cutting through all the wrap, and finally arrived at the stand, and what a beautiful site to behold. The stand looks like a work of art, all welds look perfect, very well designed, and the powder coat finish is flawless over every bit of it. It almost seems a shame to mount it under the bike where it will be subjected to all manor of abuse. Arranged all the parts, studied the directions, and got ready for the install. I found it helpful to watch the video on Twisted Throttle’s site a couple of times. The most difficult bolt is the top righthand side, so I started with this. Using a 1/4″ drive allen and extensions, as the video suggested, I had no problems. I got the stand mounted with no problems, and it was time to try it out. I have a V-Strom, and have it lowered 5/8 of an inch (I know, all the stands say not recommended for a lowered bike) but the bike went right up. The stand seems very heavy duty and strong, and I’m sure will last the life of the bike with no problems. And I’m still dragging the foot pegs before the stand hits the ground.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  48. Capt_Yossarian

    Easy upgrade

    Capt_Yossarian

    Very easy to install. Very nice to have a center stand again.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  49. Coronetkid

    Very easy install.

    Coronetkid

    Installation was a snap and the ease of putting the bike on the center stand is incredibly easy. I like this way better than the factory stands offered.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  50. Sluggo

    VStrom Center Stand

    Sluggo

    Installed in about 30 minutes. Instruction provided enough visual cues simplifying installation. Bike lifts easily on to the stand. Product was well made

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  51. Rcoz

    Better than expected!

    Rcoz

    Center stand for my new v-strom so I can do chain maintenance. Putting it on and off the stand is too easy. No regrets about this purchase.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  52. Tooldev

    Works well

    Tooldev

    It installed in under an hour, and is a great addition to the bike. I struggled a bit installing a screw hidden behind the exhaust on the right side of the bike but was able to get it in with a socket extension.
    I always use the center stand to fill up and clean the chain.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up