SW-MOTECH produces the toughest and most thoughtfully designed luggage, protection, and ergonomic accessories you can buy for your motorcycle. Designed & engineered in Germany for a precision fit that integrates perfectly with all OEM components. Increase your luggage capacity using a SW-MOTECH luggage rack with saddlebags and/or a top case. Safeguard your motorcycle from damage when traveling off-road with a skidplate, or reduce the risk of damage during a fall with a set of crashbars, or frame sliders. No matter what or where you ride, enhance the experience with high quality gear from SW-MOTECH Germany!
The patented Type 160 PRO Tank Ring is made to suit the tank filler neck of your motorcycle model. This ensures the best possible positioning onto the tank.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The SW-MOTECH aluminum skid plate engine guard for Kawasaki KLR650 protects the undercarriage and vulnerable lower engine cases from damaging stones and other trail obstacles. Hearty 4 mm thick alloy plate is welded into a single structural unit for exceptional strength to ensure . This indispensable engine guard is mounted with recessed hardware to prevent damaged bolt heads and rubber grommets to isolate vibratio
...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This SW-MOTECH sidestand features super-strong steel construction with typical German design and high engineering standards. Superb integration with the factory exhaust and side stand components -- retain all existing features without sacrificing lean angle or clearances.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The SW-MOTECH upper crash bar for OEM bars on KTM 1090 Adventure R & 1290 Super Adventure R enhances the protection of the factory equipment by safeguarding the upper fairing and fuel tank. High strength tubular steel features a 21.3 mm diameter with a wall thickness of 2.5mm and CNC machined steel clamps and attachment points for a precision fit. These German engineered upper crash bars help defend your invest...
Enhance your on and off road riding with the SW-MOTECH EVO Foot Peg Kit designed specifically for select Honda and Suzuki models. These foot pegs have a unique design with an offset cam located by a sturdy splined shaft that allows selection of 12 positions. At the highest position the EVO Foot Peg Kit is level with the stock location. At the lowest the pegs drop the foot position by 0.6in (15mm). The cam design...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Installs in minutes by clamping onto existing 7/8" (22mm) diameter handlebar. Perfect for mounting GPS radar detector coffee mug flux capacitor etc. Available in powdercoated silver (s) or black (b).
The SW-MOTECH Rear Brake Master Cylinder Guard is designed to fit the Yamaha Tenere 700. This guard protects the rear master cylinder from impact and prevents the foot from contact. A laser-cut and precision bent aluminum strengthening process makes the construction tough and durable and capable of withstanding heavier blows.
Enjoy maximum protection and durability with an SW-MOTECH skid plate. Fully welded aluminum construction is engineered in Germany to provide proper protection from impacts abrasions and projectile debris. Multiple ventilation slots on the front sides and bottom of the skid plate permit maximum air-flow to keep your motor cool. Drilling cutting welding or any other permanent modifications are not required.
Get ready for your next motorcycle adventure with luggage mounted on the Off Road Edition of SW-MOTECH's PRO Side Carriers. With available adapters that allow lockable mounting and removal of a wide range of side cases as well as soft saddlebag luggage you can tailor this rack to meet a variety of challenges. This off road version includes added retention hardware to provide added mount security in rough terrain. Car...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The SW-MOTECH upper crash bars for BMW R1200GS & R1250GS safeguard the upper fairing and radiators during a fall slide or when mis-judging a line while off-road. Robust 22-millimeter tubular steel safeguards the upper fairing and both radiators from expensive impact and abrasion damage. These high quality crash bars are designed and engineered in Germany to integrate perfectly with OEM BMW lower crash bars or...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Adjust your handlebars for more comfort during longer trips and more control during technical riding. Especially good for off-road riding where you'll want to stand up for better balance and control. If you have long legs and short arms here's the mod for you—short of corrective surgery your HMO probably doesn't cover anyway.
The bike-specific PRO side carrier made of 2.5 mm-thick steel is extremely durable. The PRO side carrier offers side cases from SW-MOTECH Givi/Kappa Hepco & Becker Krauser and Shad as well as the Sysbag 15 and Sysbag 30 a secure fit - the matching adapter kits are sold separately. The PRO side carrier's numerous functional drill holes enable the mounting of RotopaX canisters and other accessories. Adapter kits for attaching cases from Givi/Kappa Krauser Hepco & Becker and Shad are also available.
The PRO tank ring perfectly combines the innovative strength of two German companies: The QUICK-LOCK locking mechanism of the SW-MOTECH tank rings, which has been tried and tested for years, is now even easier to operate thanks to the magnetic guide aid of the Fidlock technology. We have significantly improved the positioning of the top […]
The patented Type 140 PRO Tank Ring is made to suit the tank filler neck of your motorcycle model. This ensures the best possible positioning onto the tank.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The SW-MOTECH 20mm bar risers for 28mm handlebars mount to the factory bar clamp offering a more relaxed seating position and improved comfort. High quality CNC machined aluminum is powder coated in your choice of black or silver for an attractive appearance that also improves durability and corrosion resistance. These handy bar risers move the handlebar higher up in the factory bar clamp to position the rider at a mo...
The SW-MOTECH GPS mount makes it possible to fit an electronic navigation device to the cockpit above the dashboard of your Versys 1000 with optimum grip and clever positioning. Keep a navigation unit (and clearly thanks to the vibration damped mounts) in your field of vision without blocking the OEM gauges. The QUICK-LOCK design makes it easy to bring your expensive electronics with you when parked and reinstalle...
The SW-MOTECH center stand for your KTM 790 Adventure increases the versatility of your machine for more secure parking on various terrain while enhancing ease of maintenance. Robust steel construction provides sturdy support for the motorcycle and is powder coated black for enhanced durability and corrosion resistance. This high quality center stand is designed and engineered in Germany for seamless integration wi...
This robust skid plate engine guard provides additional protection for the engine and plastic tank of the KTM 790 Adventure / R & KTM 890 Adventure / R. The 4 mm thick aluminium sheet of high-quality aluminium alloy protects the engine from stone chipping and ground contact, thus offering you more safety and a customized look.
The patented Type 125 PRO Tank Ring is made to suit the tank filler neck of your Suzuki motorcycle model. This ensures the best possible positioning onto the tank.
Keep your investment safe during a fall or slide with the SW-MOTECH crash bars engine guards for your Honda. Robust tubular steel construction and powder coated black for an attractive factory original aesthetic that also improves durability and corrosion resistance. These essential crash bars are engineered in Germany to safeguard the most vulnerable and critical components including the engine cases exhaust head...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect the most essential components of your KTM during a fall or slide with SW-MOTECH crash bars. Hearty tubular steel construction is mounted securely to the main frame and prevents the frame engine cases and radiator from contacting the ground during a mishap. A high quality powder coated finish improves durability while preventing corrosion and making these premium crash bars easy to keep clean. Installation...
Cover your SLC side carrier when no luggage is mounted with SW-MOTECH's left side number plate.The quick-release fastener is mounted on the back of the plate and can be locked with just one click to the SLC side carrier.
Improve versatility and cargo capacity with the SW-MOTECH top rack for Honda CRF250L & CRF250L Rally. Sturdy tubular steel construction is powder coated black for an attractive finish that is also durable and corrosion resistant. This valuable top rack creates a secure foundation for the addition of your favorite soft luggage or anything else you might want to strap to your motorcycle. Convenient tie down loops make s...
The SW-MOTECH Upper Crash Bars for Suzuki V-Strom 1050 are made of robust tubular steel with weather- and corrosion-resistant powder coating in black. The elements developed exclusively for this motorcycle seamlessly fit the look of the vehicle and guarantee easy mounting. The upper crash bars mainly protect the fairing of the motorcycle and give the motorcycle an individual look.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Constructed of heavy-duty mild steel SW-MOTECH Crash Bars are designed to provide maximum protection optical integration and high-quality fit and finish.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
SW-MOTECH has raised the bars (literally) with these new (2 in) 50 mm handlebar risers for your motorcycle with 22mm handlebars increasing comfort by providing you with a more upright riding position. This ergonomic enhancing accessory is available in either powder-coated black or bead blasted aluminum for strength and durability. No need to replace your handlebars. Simply remove the original top clamp place the...
The patented Type 303 PRO Tank Ring is made to suit the tank filler neck of your BMW motorcycle model. This ensures the best possible positioning onto the tank.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
SW-MOTECH has raised the bars (literally) with these new 40mm handlebar risers for the BMW R1200GS LC / Adventure and R1250GS increasing comfort by providing a more upright riding position. Available in either powder-coated black or bead blasted aluminum for strength and durability.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This TRAX ADVENTURE topcase kit is an aluminum luggage system designed for adventure touring and trail riding. Robust 1.5mm aluminum is embossed for structural rigidity robot welded for strength and punch riveted for resistance to water penetration. The case is available in anodized silver or powder coated black inside and out for corrosion resistance and easy cleaning. 38 liters of storage will easily house your fu...
The SW-MOTECH GPS mount makes it possible to fit an electronic navigation device to the cockpit above the dashboard of your 790 Adventure with optimum grip and clever positioning. Keep a navigation unit or smartphone device conveniently (and clearly thanks to the vibration damped mounts) in your field of vision without blocking the OEM gauges. The QUICK-LOCK design makes it easy to bring your expensive electronics...
Upgrade your key chain with an SW-MOTECH Key Chain Multi-tool. Features five sizes of hex keys a Quick Lock EVO carrier fastener key and the ever important bottle opener.
BLAZE offers an innovative way to mount soft saddlebags on sportive motorcycles. The system features mounting arms that quickly attach to the motorcycle and then slip into channels placed on the backside of each bag. These support arms prevent side-to-side movement stabilize the bags and prevent potential contact with the rear tire or exhaust. The mounting arms detach quickly to retain the look of the motorcycle w
...
Includes two 1/2" (12.7mm) tall M5 spacers and two M5x30mm lenshead screws. Used to level out the tank bag on certain Quick-Lock tank bags when used on particular bikes.
Additional protection against rocks and contact with the ground for the engine: the high-quality, aluminium alloy engine guard shows what it's capable of off the street, but provides extra safety and an individualized look on the streets, too. State-of-the-art production gives these bike-specific protectors a secure fit without affecting ground clearance. The installation on frame mounting points lends additional stability and allows for easy installation.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The SW-MOTECH Crash Bars Lower Engine Guards For BMW R1200GS LC are constructed of heavy-duty mild steel and provide maximum protection while maintaining optical integration and high-quality fit and finish.
The patented Type 213 PRO Tank Ring ensures the best possible positioning onto the tank of your Yamaha Tenere 700 with the included bike-specific mounting piece.
SW-MOTECH has manufactured this bike-specific Crash Bar Engine Guard for Suzuki V-Strom 1050 from black powder-coated steel. Crash bars by SW-MOTECH provide the necessary extra safety for tank, fairing and components. Designed specifically for these types of bikes, these accessories fit seamlessly with the lines of the vehicle and offer optimal cornering clearance.
This SW-MOTECH Brake Reservoir Guard is designed to protect the original fluid receptacle on your bike. Each black anodized master cylinder protector prevents the unintentional removal of the lid and looks really cool too!
Crash bars from SW-MOTECH provide the necessary extra safety for the tank, cladding and components. The elements manufactured specifically for the motorcycle type fit seamlessly into the look of the vehicle and at the same time offer optimum freedom from leaning. Tailor-made add-on elements enable resilient and easy installation on original attachment points – changes […]
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The SW-MOTECH front fender kit for Yamaha XSR900 is a direct replacement upgrade over the factory unit offering improved aesthetics and precision construction. Crafted from aluminum which is lightweight yet sturdy for deflection of dirt mud splatter water spray and other road debris while providing a significant aesthetic upgrade over the original unit. This handsome front fender was designed and engineered in Germa...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Improve safety and protection on the Honda Africa Twin with the SW-MOTECH chain guard extension. Robust 2.5 mm thick aluminum covers the exposed section of chain to protect the rider from accidental contact while also deflecting stones and other debris from accessing the drivetrain. This protective chain guard helps to contain excess grease from flying so your motorcycle and expensive riding gear stay cleaner durin...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The SW-MOTECH aluminum engine guard skid plate for BMW R1200GS LC & R1200GS LC Adventure in Silver or Black provides superior protection for the undercarriage and vulnerable lower section of the motor. Heavy duty 4 mm thick alloy plate is fully welded into a single structural piece for exceptional strength. This essential skid plate features recessed lower hardware to increase protection and an oil drain access port t...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
If you're looking for some strong and stylish protection then the SW-MOTECH Aluminum Engine Guard Skid Plate is for you. This engine guard is constructed of a piece of 4mm-thick aluminum that is bent and welded to cover your vulnerable engine for heavy-duty light-weight protection. The bottom of the guard includes side protectors that wrap around the engine block to provide both bottom and side protection. Availabl...
This 1" ball system is a high performing rugged and versatile motorcycle mounting solutions for virtually any device. The ball and socket system offers vibration dampening and modularity unparalleled by any other mounting solution available. For use in mounting mobile phones and GPS to motorcycles.
Replaces the original cast left-side aluminum mirror mount (which has a tendency to snap off) with a billet aluminum mirror mount for increased strength. Also relocates the choke switch from the original turn signal switch housing onto the mirror mount allowing installation of an aftermarket turn signal switch with a modern turn signal cancellation control (sold separately). Can be used in conjunction with the SW...
Once a set of Pro Side Carriers are on your bike, an adapter kit is all that’s needed to support a luggage system from SW-MOTECH, Givi, Shad, RotopaX and DrySpec. These hydro-formed steel frames are stronger and lower-profile than the previous generation of Quick-Lock EVO Side Case Racks. The welds between support arms and these […]
Constructed of high-performance Moplen polypropylene with powder coated black aluminum backbone the plastics are available in menacing black. Moplen polypropylene plastic deflectors Available in black Impact resistant For 6mm or 8mm threaded handlebars Bar end mounted Black powder coated aluminum frame Sold as pair All mounting hardware & plastics included Simple installation Coordinates with Barkbusters […]
This durable foot extension has a large contact surface for enhanced stability, even on uneven ground and soft soil. When developing new products, our priorities are a precision fit and easy use during everyday riding. The profiled top of the foot extension makes it easy to fold out the stand – even with heavy boots. […]
The patented Type 123 PRO Tank Ring replaces your BMW motorcycle's tank filler and replaces it with a tank ring adapter. The PRO tank ring is attached to the tank ring adapter.
This robust skid plate engine guard provides additional protection for the engine and plastic tank of the KTM 790 Adventure / R. The 4 mm thick aluminium sheet of high-quality aluminium alloy protects the engine from stone chipping and ground contact, thus offering you more safety and a customized look.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Super-strong steel construction features typical German design and high engineering standards. Superb integration with the factory exhaust and sidestand components -- retain all existing features without sacrificing lean angle or clearances.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Enjoy maximum protection and durability with an SW-MOTECH skid plate. Fully welded aluminum construction is engineered in Germany to provide proper protection from impacts abrasions and projectile debris. Multiple ventilation slots on the front sides and bottom of the skid plate permit maximum air-flow to keep your motor cool. Reinforced brackets utilize rubber isolators at mounting points to help dampen engine v...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
SW-MOTECH has raised the bars (literally) with these new (7/8 in) 20mm handlebar risers for your motorcycle with 22mm handlebars increasing comfort by providing you with a more upright riding position. This ergonomic enhancing accessory is available in either powder-coated black or bead blasted aluminum for strength and durability. No need to replace your handlebars. Simply remove the original top clamp place th...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The SW-MOTECH front fender kit for Yamaha XSR700 is a direct replacement upgrade over the factory unit offering improved aesthetics and precision construction. Crafted from aluminum which is lightweight yet sturdy for deflection of dirt mud splatter water spray and other road debris while providing a significant aesthetic upgrade over the original unit. This handsome front fender was designed and engineered in Germa...
The SW-MOTECH SLC side carriers form part of a comprehensive soft-luggage set for a wide range of bikes. Use them to mount a set of Legend Gear LC1 (9.8 liter) or LC2 (13.5 liter) side cases the sleek 16.5-liter ABS-shell Urban cases or the SysBag 10 (10 liter) or 15 (15 liter) cases. Simple in concept the SLC carriers are made from sturdy powder-coated steel for enduring strength and good looks. They mount
...
The SW-MOTECH radiator guards for BMW R1200GS LC provide protection for the most vulnerable components of the cooling system. Crafted from aluminum for excellent strength without unnecessary weight which is then powder coated black for enhanced durability and corrosion resistance. These German engineered radiator guards allow maximum cooling while deflecting bugs stones and other dangerous debris. Fragile cooling...
The large contact surface of the sturdy foot extension provides secure support, even on uneven or soft ground. Product developed with particular attention paid to fair and easy handling on a daily basis. The superior machining of the foot extension makes it easier to deploy even if you are wearing boots. Optimal fit and secure […]
The patented Type 115 PRO Tank Ring is made to suit the tank filler neck of your Suzuki or Yamaha motorcycle model. This ensures the best possible positioning onto the tank.
SW-MOTECH has manufactured this bike-specific Crash Bar Engine Guard for KTM 390 Adventure from black powder-coated steel. Crash bars by SW-MOTECH provide the necessary extra safety for tank, fairing and components. Designed specifically for these types of bikes, these accessories fit seamlessly with the lines of the vehicle and offer optimal cornering clearance.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Enhance the appearance of your Suzuki SV650 with the SW-MOTECH front fender kit. Lightweight aluminum construction offers greater strength improved coverage and a more upscale feel compared to the OEM plastic unit. Available in a durable corrosion resistant powder coated black or anodized brushed aluminum silver finish. Installation is simple using included mounting brackets which utilize existing factory fork moun...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The SW-MOTECH TRAX ADVENTURE Sidecase Kit for QUICK-LOCK Sidecarriers is an all-weather hard luggage system boasting 82 Liters of interior space; so you can tote around all your essentials with ease! The rugged and feature packed cases come in two durable finishes: Anodized silver or powder coated black to suit the color scheme of your bike...
The SW-MOTECH SLC side carriers form part of a comprehensive soft-luggage set for a wide range of bikes. Use them to mount a set of Legend Gear LC1 (9.8 liter) or LC2 (13.5 liter) side cases the sleek 16.5-liter ABS-shell Urban cases or the SysBag 10 (10 liter) or 15 (15 liter) cases. Simple in concept the SLC carriers are made from sturdy powder-coated steel for enduring strength and good looks. They mount
...
Be prepared for any adventure with the SW-MOTECH TRAX ION 37-Liter side case - left | aluminum silver to keep your gear secure dry and clean no matter where you ride your motorcycle. Sturdy alloy construction utilizes a wall thickness of at least 1.5 mm with precision robot welded seams and punch riveted trim for serious durability that is completely dust/waterproof. All the corners on this German engineered side...
Crash bars from SW-MOTECH provide the necessary extra safety for the tank, cladding and components. The elements manufactured specifically for the motorcycle type fit seamlessly into the look of the vehicle and at the same time offer optimum freedom from leaning. Tailor-made add-on elements enable resilient and easy installation on original attachment points – changes […]
The SW-MOTECH front spoiler, which is tailored to the design of the bike, offers reliable protection against stone chips and unintentional contact with the ground. The powder coating on the surface is extremely durable and permanently protects against corrosion. Extremely Sturdy underbody protection can be easily attached to original attachment points using the custom steel […]
PRO side carrier The carrier body is designed with a thickness of 2.5 mm to make it as close as possible to the motorcycle’s body. This carrier is light, durable and has a large lineup of adventure motorcycle. Various SW-MOTECH series can be installed via the adapter kit (sold separately). *Adapter kit sold separately.
The SW-MOTECH center stand for your KTM 790 Adventure R increases the versatility of your machine for more secure parking on various terrain while enhancing ease of maintenance. Robust steel construction provides sturdy support for the motorcycle and is powder coated black for enhanced durability and corrosion resistance. This high quality center stand is designed […]
The patented Type 308 PRO Tank Ring is made to suit the tank filler neck of your Yamaha Tracer 900 / GT motorcycle model. This ensures the best possible positioning onto the tank.
Additional protection against rocks and contact with the ground for the engine: the high-quality, aluminium alloy engine guard shows what it's capable of off the street, but provides extra safety and an individualized look on the streets, too. State-of-the-art production gives these bike-specific protectors a secure fit without affecting ground clearance. The installation on frame mounting points lends additional stability and allows for easy installation.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This SW-MOTECH TRAX ADVENTURE 3-case Kit for ALU-RACK & QUICK-LOCK Sidecarriers is a complete hard luggage system designed for adventure touring and trail riding. Embossed aluminum boxes feature robot welded seams and punch rivets to keep your possessions dry and secure. Available in either anodized aluminum silver or powder coated black this kit is bundled with everything needed to install and use the most ve
...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This SW-MOTECH TRAX ADVENTURE 3-case Kit for ALU-RACK & QUICK-LOCK Sidecarriers is the most versatile hard luggage system designed for adventure touring and back country exploring. Anodized aluminum or powder coated black aluminum with a case thickness of 1.5 mm is embossed for superior strength while remaining lightweight. The 3 cases use some of the most advanced technology available to robot weld seams and p
...
The SW-MOTECH Front Axle Sliders Fork Protectors for Ducati Monster Hypermotard Hyperstrada & Multistrada safeguard vulnerable front-end components in the event of a fall or slide. Abrasion resistant PA6 Nylon is designed to contact the pavement before expensive hard parts to prevent damage that could end your ride and cost you some serious cash. These essential front axle sliders are highly recommended for use on t...
The SW-MOTECH Quick Release Adapter For GPS Mounts allows you to quickly switch out different navigation systems or GPS/PDA bags on motorcycle specific GPS holders. No more installing your Navi bag directly to the GPS mount. Simply attach the lower part of the adapter to your SW-MOTECH Vibration-Damped Quick Release GPS Holder and the upper part to the bag and connect the pieces together. Grab one of these essentia...
Confidently and conveniently mount a smartphone or GPS navigation device to your motorcycle with the SW-MOTECH Navi Case Pro S. Water resistant zippers seal out moisture to protect expensive electronics while a touch sensitive screen cover makes it easy to access your information as its protected from the elements. This handy Navi case features internal Velcro straps to secure the device in the padded interior. The du...
This SW-MOTECH Brake Reservoir Guard is designed to protect the original part on your bike. Besides looking pretty cool this unit also prevents the accidental removal of the canister lid.
The EVO foot pegs are mounted on the original foot peg mount using a model-specific joint adapter. The footrests are not included with this product. Features: Model-specific joint adapters for separately available EVO footrests Easy installation on the original footrest mount Material: aluminum Surface: anodized Color: silver Included: 2 x joint adapters for EVO footrests […]
The engine protection extension is mounted on the SW-MOTECH main stand of the Honda Africa Twin and protects the suspension strut deflection while driving. Easy installation on the main stand from SW-MOTECH with two screws at existing points and two rubber-coated clampsExtension of the underbody protection against falling rocks and collisions Features: Material: aluminum Material […]
Once a set of Pro Side Carriers are on your bike, an adapter kit is all that’s needed to support a luggage system from SW-MOTECH, Givi, Shad, RotopaX and DrySpec. These hydro-formed steel frames are stronger and lower-profile than the previous generation of Quick-Lock EVO Side Case Racks. The welds between support arms and these […]
The SW-MOTECH SLC side carriers form part of a comprehensive soft-luggage set for a wide range of bikes. Use them to mount a set of Legend Gear LC1 (9.8 liter) or LC2 (13.5 liter) side cases the sleek 16.5-liter ABS-shell Urban cases or the SysBag 10 (10 liter) or 15 (15 liter) cases. Simple in […]
BLAZE offers an innovative way to mount soft saddlebags on sportive motorcycles. The system features mounting arms that quickly attach to the motorcycle and then slip into channels placed on the backside of each bag. These support arms prevent side-to-side movement stabilize the bags and prevent potential contact with the rear tire or exhaust. The […]
Additional protection in the event of a fall provides shock protection to the frame. The shape, surface and material ensure excellent sliding properties and reduce damage to the motorcycle. The sturdy aluminum frame is easy to install, and the friction-resistant, CNC-machined polyamide skid shoes can be replaced quickly, if needed. Frame, engine and fairings protectionStylish […]
This durable foot extension has a large contact surface for enhanced stability, even on uneven ground and soft soil. When developing new products, our priorities are a precision fit and easy use during everyday riding. The profiled top of the foot extension makes it easy to fold out the stand – even with heavy boots. […]
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
SW-MOTECH produces the toughest and most thoughtfully designed luggage, protection, and ergonomic accessories you can buy for your motorcycle. Designed & engineered in Germany for a precision fit that integrates perfectly with all OEM components. Increase your luggage capacity using a SW-MOTECH luggage rack with saddlebags and/or a top case. Safeguard your motorcycle from damage when traveling off-road with a skidplate, or reduce the risk of damage during a fall with a set of crashbars, or frame sliders. No matter what or where you ride, enhance the experience with high quality gear from SW-MOTECH Germany!
