The Mounting Block offers an easy solution to installing the xSystem to any surface or frame tube. It can either be cable tied or fastened using bolts.
The Scottoiler Lube Tube Adapter replaces the Filler Plug on your xSystem and will connect to the Lube Tube flexible touring reservoir to extend the range of your xSystem.
Fit a Scottoiler to your KTM 1290 Super Duke and GT with a SA-0622BL Dispenser Adapter Kit. Allows mounting of standard dispenser to the threaded paddock bobbin mounts integrated in your motorcycle's swingarm.
Fit a Scottoiler to your BMW F800R with a SA-0615BL Dispenser Adapter Kit. Allows mounting of standard dispenser to the M6 threaded chain guard mount on your motorcycle's swingarm.
Fit a Scottoiler to your BMW S1000R or S1000RR with a SA-0625BL Dispenser Adapter Kit. Allows mounting of standard dispenser to the M8 threaded paddock bobbin mounts integrated in your motorcycle's swingarm.
The replacement Scottoiler vacuum damper assembly is made for the vSystem. This elbow shaped piece connects your Scottoiler vacuum tubing to the engine vacuum and includes a filter that stabilizes the vacuum while keeping the system clean. By damping the vacuum pulses the Scottoiler systems will not be affected by subtle pressure fluctuations. This Scottoiler vacuum damper assembly can be combined with a vacuum take-o...
This Scottoiler M5 brass screw-in spigot provides an auxiliary vacuum outlet to connect and operate the vSystem automatic chain oiler. To install this component use a small amount of sealant to achieve an airtight seal. This spigot taps into your motorcycle's engine vacuum where an M5 threaded hole exists. Are you transferring your Scottoiler vSystem from one motorcycle to another? If you are it is recommended tha...
The Scottoiler stainless steel dispenser plate clip is a replacement part manufactured to keep your vSystem in tip top shape. This corrosion resistant and sturdy piece is a very important component of the automatic chain oiler system. The clip is designed to hold the injector nib securely to the dispenser plate so it makes contact with the face of the sprocket ensuring proper lubrication. When the dispenser plate cl...
The Scottoiler eSystem REP is one of the most important components of the electronic chain oiler. The Reservoir Electronic Pump provides the pumping action that forces the oil from the reservoir. The REP works in conjunction with the display unit which provides the sensing and control of the eSystem. This unit is a direct replacement for the pump that came with your Scottoiler Electronic Automatic Chain Oiler.
The Scottoiler breather assembly with male luer attaches to the oil reservoir. This piece is crafted using a clear PVC tube with a black plastic luer (spigot) on one end and a breather filter on the other. The breather assembly has a male luer which connects into the filler plug allowing the system to breathe. As the oil in the reservoir level goes down air is drawn in to replace it. Scottoiler includes a...
The Scottoiler European Adapter Kit is required to complete the installation of the vSystem automatic chain oiler on European versions of the BMW F650GS & F800GS Twin & F700GS. The airbox connections are slightly different than those of motorcycles built for the U.S and this component ensures proper fit...
This Scottoiler tee connector is manufactured to re-connect the vacuum piping (6mm inner diameter) during the installation of your Scottoiler vSystem. The smaller end then connects to the vacuum damper that is attached to the vacuum tube from the reservoir. Grab one to keep in your toolbox as a spare.
The Scottoiler vacuum damper assembly is a genuine replacement part for your vSystem. This elbow shaped piece connects your Scottoiler vacuum tubing to the engine vacuum and comes with a filter that stabilizes the vacuum and keeps the system clean. By damping the vacuum pulses the Scottoiler systems will not be affected by subtle pressure fluctuations. This Scottoiler vacuum damper assembly can be combined with a v...
The Scottoiler universal spigot assembly is an auxiliary vacuum port for installation on motorcycles without an original vacuum connection which makes use of the vSystem automatic chain oiler possible. Without a factory vacuum connection the only other option would be to install the eSystem electronic chain oiler...
The Scottoiler dispenser adapter kit will provide you with a neat and tidy setup for your Scottoiler unit on your Kawasaki motorcycle. Included in this kit are all the pieces necessary to install the dispenser. This is a replacement kit and contains the same pieces that came with your Scottoiler vSystem.
Use the Scottoiler RMV bolt-on clamp set assembly to attach your Scottoiler reservoir on your motorcycle where a 6mm diameter hole is available. This durable clamp uses two slightly different sized mounting rings that securely hold your Reservoir Metering Valve in one direction only. Add a Scottoiler vSystem or eSystem to your motorcycle for the best automatic chain oiling on the market.
The Scottoiler Tee connector with Viton is used for Triumph motorcycle models that have corrugated vacuum pipes. Scottoiler uses Viton in the construction of the T-piece because it will resist heat up to 400° F and wards against oxidation ozone UV exposure weather fungus and mold ensuring a secure seal. Installation is super simple. Just cut the vacuum pipe and slide the T-piece over the outer of ...
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
