Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Similar in shape to the original windscreen the MRA TouringScreen includes a raised extension approximately 2-3 inches (5-7 cm) taller than the original windscreen. Available in clear smoke gray and gloss black.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
SW-MOTECH has raised the bars (literally) with these new (7/8 in) 20mm handlebar risers for your motorcycle with 22mm handlebars increasing comfort by providing you with a more upright riding position. This ergonomic enhancing accessory is available in either powder-coated black or bead blasted aluminum for strength and durability. No need to replace your handlebars. Simply remove the original top clamp place th...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
SW-MOTECH has raised the bars (literally) with these new (2 in) 50 mm handlebar risers for your motorcycle with 22mm handlebars increasing comfort by providing you with a more upright riding position. This ergonomic enhancing accessory is available in either powder-coated black or bead blasted aluminum for strength and durability. No need to replace your handlebars. Simply remove the original top clamp place the...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Installs in minutes by clamping onto existing 7/8" (22mm) diameter handlebar. Perfect for mounting GPS radar detector coffee mug flux capacitor etc. Available in powdercoated silver (s) or black (b).
Made from heavy-duty 3mm thick 1-inch (26mm) wide strips of steel. Inner hole diameter is 5/16-inch (8mm). Center-to-center hole distance is 3 inches overall length of bracket is 4 inches. Powder-coated flat black. Sold each.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This Givi 1000F Universal Monorack is a Top rack designed to fit most makes and model motorcycles. If your bike doesn't have a specific luggage platform to carry hard luggage this kit can be mounted to your rig using multiple mounting options allowing you to carry a topcase. Givi Monolock or Monokey topcases can be mounted atop this Universal Monorack using either a Monokey or Monolock Adapter Plate (Select using drop-down menu).
Universal monorack for Givi Monolock or Monokey topcases (specify case type when ordering).
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
The R&G paddock stand for the front lifts the forks get the tire off of the ground to complete tire changes maintenance or to prevent flat tire spots during storage. Sturdy FE360 tubular steel construction is finished in an attractive black powder coat that also enhances durability. This premium stand uses a unique fastening system which allows disassembly to conserve space when traveling or not in use. Four large wh...
The R&G paddock stand for the rear lifts the swing arm with the use of 6mm or 8mm cotton reels or spools to get the tire off of the ground while performing maintenance or during storage. High strength FE360 tubular steel serv...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
R&G Universal License Plate Adapter. Used to help fit some Tidy Tails originally designed for European marker plates with American & Canadian license plates.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. The D20 also features a rigid core construction that allows the bags to retain their shape even when empty and makes packing and unpacking super easy.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
D28 Dual-End Dry Bag The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips but is the ideal add on bag for a D38 or...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
DrySpec D38 Rigid Waterproof Motorcycle Dry Bag
The D38 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. The D38 features a rigid core that enables the bag to be mounted to any bike with or without a top rack even when the bag is completely empty. Try that with a traditional dry bag! The rigid construction and unique 4-point strap m...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D106 Modular Packing System consists of the D38 DrySpec Rigid drybag the D28 Dual-End drybag and the D20 saddlebag set. The D38 D28 and D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Get solid tank grip without snagging! Get a TechSpec Gripster MX GEN Sheet (12" x 13") to cut to a custom shape for your application. Many pre-cut bike specific shapes are also available.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Get solid tank grip without snagging! TechSpec Gripster General Sheets with the center tank protector allow you to cut to a custom shape for your application. Many pre-cut bike specific shapes are also available. All Techspec options feature a "Releasable Adhesive" allowing you to remove and reuse without leaving icky sticky goo behind.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D56 Modular Packing System consists of two D28 DrySpec dual-opening drybags. The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips but is...
The RAM-B-149Z-UN8U consists of a U-bolt base double socket arm and universal X-Grip II for 7" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip II holder expands and contracts allowing for a perfect custom fit of you...
The DrySpec exhaust heat shield prevents soft luggage and luggage straps from coming in contact with your exhaust. It fits exhausts pipes ranging in size from 4 to 6 inches in diameter and can accommodate non cylindrical exhaust shapes. The heat shield mounts to the exhaust with a stainless steel hose clamp and includes an adhesive ba...
This DENALI Motorcycle Engine Guard/Crash Bar Light Mount Kit allows fitment of any DENALI LED Lights to engine guards crash bars or any tube 21mm-29mm (0.826in-1.125in) in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional fully rotatable mounting shelf to create a super versatile and robust light mount
...
This DENALI Engine Guard/Frame Light Mount Kit allows fitment of any DENALI LED Light Kit to engine guards frame tubes or any tube 32mm-38mm (1.25"-1.5") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional fully rotatable mounting...
This DENALI SoundBomb Compact horn mount kit allows fitment of the horn to engine guards crash bars or any tube 21mm-29mm in diameter. The clamp has a unique octagonal inner profile that allows the mount to securely grip a wide range of tube diameters and includes a fully rotatable mounting shelf to create a super versatile and robust horn mounting solution.
This elegant horn mount is intended for install...
The R&G Titanium Radiator Guard Universal Mesh will give your radiator or other vulnerable components protection from airborne and damage causing debris.
The Givi S957B Universal Smartphone Holder is a handy and safe way to protect and attach your smartphone to either a scooter or motorcycle. To mount to your bike simply attach with brackets that are designed to fit tubular handlebars or use the Givi S951KIT2 which connects to bikes with handlebar risers installed.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This R&G Universal Tank Traction Grip set contains two sheets of a uniquely designed traction grip textured material that is cut in a staggered ridged pattern.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
R&G Universal Tank Traction Grips When you install this set of traction grips you will be gaining better control of your motorcycle reduce fatigue and allow for correct body positioning. These pieces of a specially designed material make gripping your tank easier generating the ability to concentrate on cornering and braking and not slipping and sliding in your seat. The texture is designed so that...
The Givi STTR40 Universal GPS Holder is designed to mount the TOM TOM Rider 40 or 400 to any tube diameter from .31" to 1.3". This navigation mount can be attached to handlebars mirror stalks or crossbars so you can find the perfect spot to keep your information within sight. The STTR40 comes with all the hardware required for mounting.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
R&G Universal Tank Traction Grips | 2 Piece Kit - 26cm x 11cm This kit contains two pieces of a specially designed material that is durable and provides more grip on your tank. With the tank traction grips your legs will grasp your tank and you will feel more secure during braking and cornering. The grips reduce the slipping and sliding around on your seat during your ride. These grips not only help ma...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This set of R&G universal tank traction grips includes 2 pieces of synthetic rubber that are cut to fit most tanks. The texture on the pads allows you to grip your tank better and therefore gives you the ability to focus on your handlebar manipulation. Maintaining body position now takes less effort and your relationship with your motorcycle is improved. The traction grips adhere to your tank thanks to a paint frie...
Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights these guards offer superb wind protection without limiting access to your grips or controls. Simple to install they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather ...
Replace the original horn on your motorcycle with the attention grabbing DENALI SoundBomb Compact Dual-Tone Air Horn Kit. As the name implies the SoundBomb emits a loud blast that is nearly impossible to ignore by even the most distracted motorists and with 120 decibels of sound output measured at 3 feet the SoundBomb is 4 times louder than a standard motorcycle horn. Designed specifically for motorcycles this horn...
The DENALI universal pivot light mount allows fitment of auxiliary lights to any M5 M6 & M8 hardware location for optimum placement and lighting performance. High strength aluminum is CNC machined for a precision fit and hard anodized black for enhanced durability and corrosion resistance. This versatile light mount increases possible installation points including bodywork fasteners (as long as they are capable of su...
The GIVI TM421 Universal Hand Protectors will keep you riding on those chilly nights and when the leaves start to turn. These motorcycle muffs install over your handguards to give your hands that extra layer of protection from the elements and UFOs. Easily install the GIVI TM421 to just about any motorbike with a set of handguards and discover just how having proper hand protection can increase the comfort and safe...
This premium DENALI DrySeal™ ON-OFF Waterproof Switch can handle a load up to 15 Amps and is ideal for controlling many different accessories like auxiliary lighting. The kit includes both ⅞” and 1” handlebar switch mounting bands as well as an adhesive pad for surface mounting. In addition to molded silicone gasket seals DENALI uses a unique DrySea...
This DENALI DataDim™ Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle’s original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so an external signal can reliably control the intensity of the LED chip at the source.
This DENALI Y-Splitter Kit powers two sets of DENALI 2.0 LED lights from one harness! The plug-n-play adapter simply plugs into the end of the DENALI 2.0 Premium 3-pin harness allowing control of two sets of lights
This DENALI 2.0 Premium wiring harness kit features high-quality waterproof components and is designed to power two DENALI 2.0 LED Light Pods. It features low profile water tight connectors and high quality molded wire to ensure moisture is kept out of the system. The harness includes a completely sealed waterproof switch that was engineered from the ground up to withstand harsh conditions on powe...
The DENALI 2.0 perch switch mount kit is used to fit the DrySeal waterproof switches to your clutch or brake perch. The kit includes everything needed to mount on M5 and M6 hardware in horizontal or vertical orientation.
The DENALI HI-LOW-OFF Switch replaces the standard ON-OFF switch. The switch enables independent dimming of the lights separate from the vehicle's OEM lighting system. This allows you to change from low intensity to full brightness on motorcycles with OEM LED headlights that don't have a clean 12V high beam trigger signal. This switch is also a great option for those who want full independent contr...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The DENALI D4 2.0 LED light pod with DataDim™ technology was engineered from the ground up to create the brightest most efficient and durable LED lights. Specifically designed for powersports applications to focus on generating the most amount of light with the least amount of power draw from your motorcycle. The D4 is fitted with True-Hybrid™ lenses providing a combination of spot and flood patterns
...
Designed to fit larger adventure and dual-sport bikes with or without sidecases and topcases. Waterproof outdoor protection with anti-theft features and paint protection built in.
The DENALI D2 2.0 LED TriOptic™ LED light kit with DataDim technology & amber lenses produces a remarkable amount of light in a very compact package that is perfect for riding in low light/severe weather conditions on any type of motorcycle. With a powerful 10-watt Cree LED the DENALI D2 casts a powerful beam 525ft down the road in your choice of clear or amber for serious foul weather performance and co
...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This Daytime Running Light kit allows installation of a single DENALI DRL pod with a flush fitment on any flat surface of your motorcycle for maximum visibility towards oncoming traffic. A silicone gasket ensures the unit is watertight and the included hardware allows through-bolting as well as blind self-tapping for installation on plastic.
Purpose built to create the most amount of light from the smallest slimmest housing possible the DENALI B6 dual license plate LEDs are unbelievably bright and compact for an integrated fit on your license plate. Complete with a waterproof micro connector plug-n-play splitter and included posi-taps the B6 will plug-n-play directly to the DENALI CANsmart controller or connect into any vehicle brake light circuit.
...
Purpose built to create the most amount of light from the smallest slimmest housing possible the DENALI B6 is unbelievably bright and extremely compact. Complete with a waterproof micro connector plug-n-play splitter and included posi-taps the B6 will plug-n-play directly to the DENALI CANsmart controller or connect into any vehicle brake light circuit.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This Daytime Running Light Kit is designed to mount a pair of DENALI DRL pods on the front fender of your bike creating maximum visibility to oncoming traffic. This kit directly replaces the original M5 or M6 fender hardware securing the DRL’s close to the fender for a sleek low-profile installation.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This Daytime Running Light Kit is designed for fitting a pair of DENALI DRL pods to the side of any M6 hardware mounting point on your motorcycle for maximum visibility to oncoming traffic. These are ideal for tucking the DRLs up inside the fairing for an integrated factory look.
The R&G Cruiser Outdoor Cover fits on the largest cruisers and touring bikes on the market today. Waterproof outdoor protection with anti-theft features and paint protection built in.
The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced the S4 provides more light per dollar than just about anything else on the market. The new S-Series lights were specifically engineered to reduce cost without sacrificing performance quality or durability. In fact the S4 features the same high intensity LEDs as the D-Series lights b...
The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced the S4 provides more light per dollar than just about anything else on the market. The new S-Series was specifically engineered to reduce cost without sacrificing performance quality or durability. In fact the S4 features the same high-intensity LEDs as the D-Series lights but utili...
This relay is designed to replace your OEM flasher relay following the installation of aftermarket LED turn signals. This particular model features an OEM style connection commonly found on various Honda Kawasaki and Yamaha Motorcycles.
This mounting kit is specifically designed to mount a pair of DENALI DRL or B6 Visibility Pods 90 degrees to any M6 mounting point on your vehicle. The pair of powder coated steel brackets create the ideal mount for installing DRLs down low on your motorcycles front fender or installing DRLs as backup lights on body panels and ATV cargo racks. This mount can also be used to position B6 brake light pods in the ideal...
This mounting kit is specifically designed to mount a pair of DENALI DRL or B6 Visibility Pods to the side of any M6 mounting point on your vehicle. The pair of powder coated steel brackets create the ideal mount for tucking DRLs up inside a motorcycle fairing or positioning a pair of B6 brake light pods to the side of a license plate.
This mounting kit provides a waterproof gasket and all necessary hardware for installing a DENALI DRL or B6 Visibility Pod to any flat surface. Use this mounting kit to install DRLs to body panels and hand guards or mount B6 brake light pods directly to your rear bumper or on the back of your luggage cases.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Impress all your friends with the classic design of this stylish 100% cotton heavyweight T-Shirt. Includes Twisted Throttle logo. You too can be trendy and twisted.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Barkbusters STORM Single Point Bar End Mount Handguard Kit for 7/8in or 1in Hollow Handlebars - STM-005 provide wind weather and debris protection for your hands. A tough aluminum backbone bolts to each side of the bar to securely support aerodynamic plastics that create a “protective pocket” for each hand. The plastic deflectors and rigid backbones transform your exposed handlebar into a friendlier cockpit that ...
R&G Micro Indicator turn signals (pair). Includes 10 watt incandescent bulbs; replaces original 10 watt or 21 watt incandescent turn signals. Designed to fit the R&G line of "Tidy Tail" fender eliminators.
This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW Ducati and other European motorcycles with a Can-BUS electrical system and a "City Light" 194 marker bulb in the headlight. Please Note: Only compatible with bikes that use a 194 marker bulb and have a "universal" bulb connector; will not fit bikes wi...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Developed with the feedback of racers and road riders alike R&G's latest generation of Aero Knee Sliders are constructed from a special blend of composite materials to ensure the riders get the best overall performance available. The high-density polyurethane material provides the ideal "sliding action" needed for aggressive street riders and trackday enthusiasts alike. The Aero Knee Sliders attach to your leathers w...
Buy 1 set for each Givi Monokey case you will be attaching to your bike. Includes: – 1 pyramid clamp – 2 attachment screws – 2 washers – 4 replacement rubber bumpers
Adapter kit required for attaching plastic Hepco & Becker sidecases (Journey Junior Gobi Strayker) to SW-MOTECH Quick-Lock sideracks. Includes all hardware required to mount one pair of sidecases to your sideracks.
Replace the bars for your motorcycle's Barkbusters EGO Handguards. EGO lever protection by Barkbusters provide a close fit in order to enable tighter trail riding. EGO Handguards are ideal for Enduro, Trail and mini bikes but are not suitable for motorbikes with full length levers due to the narrow clearances provided by the smaller profile.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
This kit allows Barkbusters VPS or Storm full-wrap backbones to be installed into the ends of handlebars with an 18mm inner diameter opening including Barkbusters VSB bars and the original Motor Guzzi Stelvio handlebars.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this exhaust protector or "Exhaust Slider" to fit most tri-oval exhaust cans. These tri oval covers have been designed to look good and protect your expensive silencer in most crash situations.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
