Give your Yamaha XT250 motorcycle lighting, luggage and protection upgrades to increase its versatility. Shop our wide selection of quality products from top brands like SW-MOTECH, Barkbusters, R&G, DENALI, DrySpec, AdMore Lighting & MRA Windshields before your next ride.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Installs in minutes by clamping onto existing 7/8" (22mm) diameter handlebar. Perfect for mounting GPS radar detector coffee mug flux capacitor etc. Available in powdercoated silver (s) or black (b).
Made from heavy-duty 3mm thick 1-inch (26mm) wide strips of steel. Inner hole diameter is 5/16-inch (8mm). Center-to-center hole distance is 3 inches overall length of bracket is 4 inches. Powder-coated flat black. Sold each.
$159.99Original price was: $159.99.$111.99Current price is: $111.99. USD
Free Delivery
Not currently available to order
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Designed specifically for motorcycles with 7/8in handlebars the heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors available in multiple colors provide prote...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Designed for dual sport enduro and trail motorcycles with 7/8in motorcycle handlebars the Barkbusters JET lever and wind protection handguards will keep a crash from ending your ride early. Easy to install heat treated aluminum backbones feature two mounting points to provide the strength needed to prevent lever damage. Impact resistant deflectors available in multiple colors provide protection for your hands fro...
The R&G paddock stand for the front lifts the forks get the tire off of the ground to complete tire changes maintenance or to prevent flat tire spots during storage. Sturdy FE360 tubular steel construction is finished in an attractive black powder coat that also enhances durability. This premium stand uses a unique fastening system which allows disassembly to conserve space when traveling or not in use. Four large wh...
The R&G paddock stand for the rear lifts the swing arm with the use of 6mm or 8mm cotton reels or spools to get the tire off of the ground while performing maintenance or during storage. High strength FE360 tubular steel serv...
R&G Universal License Plate Adapter. Used to help fit some Tidy Tails originally designed for European marker plates with American & Canadian license plates.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Get solid tank grip without snagging! Get a TechSpec Gripster MX GEN Sheet (12" x 13") to cut to a custom shape for your application. Many pre-cut bike specific shapes are also available.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Get solid tank grip without snagging! TechSpec Gripster General Sheets with the center tank protector allow you to cut to a custom shape for your application. Many pre-cut bike specific shapes are also available. All Techspec options feature a "Releasable Adhesive" allowing you to remove and reuse without leaving icky sticky goo behind.
The RAM-B-149Z-UN8U consists of a U-bolt base double socket arm and universal X-Grip II for 7" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip II holder expands and contracts allowing for a perfect custom fit of you...
Provide lever protection for your motorcycle’s front brake and clutch controls with Barkbusters aluminum bar lever protection handguards. Designed for motorcycles with 7/8 inch or 1-1/8 inch diameters the guards feature heat treated full wrap aluminum backbones that are mounted at two points on each side for strength. Prevent ride ending damage to your motorcycle with Barkbusters aluminum bar lever protection handgua...
The DrySpec exhaust heat shield prevents soft luggage and luggage straps from coming in contact with your exhaust. It fits exhausts pipes ranging in size from 4 to 6 inches in diameter and can accommodate non cylindrical exhaust shapes. The heat shield mounts to the exhaust with a stainless steel hose clamp and includes an adhesive ba...
This DENALI Motorcycle Engine Guard/Crash Bar Light Mount Kit allows fitment of any DENALI LED Lights to engine guards crash bars or any tube 21mm-29mm (0.826in-1.125in) in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional fully rotatable mounting shelf to create a super versatile and robust light mount
...
This DENALI SoundBomb Compact horn mount kit allows fitment of the horn to engine guards crash bars or any tube 21mm-29mm in diameter. The clamp has a unique octagonal inner profile that allows the mount to securely grip a wide range of tube diameters and includes a fully rotatable mounting shelf to create a super versatile and robust horn mounting solution.
This elegant horn mount is intended for install...
The R&G Titanium Radiator Guard Universal Mesh will give your radiator or other vulnerable components protection from airborne and damage causing debris.
The Givi S957B Universal Smartphone Holder is a handy and safe way to protect and attach your smartphone to either a scooter or motorcycle. To mount to your bike simply attach with brackets that are designed to fit tubular handlebars or use the Givi S951KIT2 which connects to bikes with handlebar risers installed.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This R&G Universal Tank Traction Grip set contains two sheets of a uniquely designed traction grip textured material that is cut in a staggered ridged pattern.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
R&G Universal Tank Traction Grips When you install this set of traction grips you will be gaining better control of your motorcycle reduce fatigue and allow for correct body positioning. These pieces of a specially designed material make gripping your tank easier generating the ability to concentrate on cornering and braking and not slipping and sliding in your seat. The texture is designed so that...
The Givi STTR40 Universal GPS Holder is designed to mount the TOM TOM Rider 40 or 400 to any tube diameter from .31" to 1.3". This navigation mount can be attached to handlebars mirror stalks or crossbars so you can find the perfect spot to keep your information within sight. The STTR40 comes with all the hardware required for mounting.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
R&G Universal Tank Traction Grips | 2 Piece Kit - 26cm x 11cm This kit contains two pieces of a specially designed material that is durable and provides more grip on your tank. With the tank traction grips your legs will grasp your tank and you will feel more secure during braking and cornering. The grips reduce the slipping and sliding around on your seat during your ride. These grips not only help ma...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This set of R&G universal tank traction grips includes 2 pieces of synthetic rubber that are cut to fit most tanks. The texture on the pads allows you to grip your tank better and therefore gives you the ability to focus on your handlebar manipulation. Maintaining body position now takes less effort and your relationship with your motorcycle is improved. The traction grips adhere to your tank thanks to a paint frie...
Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights these guards offer superb wind protection without limiting access to your grips or controls. Simple to install they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D106 Modular Packing System consists of the D38 DrySpec Rigid drybag the D28 Dual-End drybag and the D20 saddlebag set. The D38 D28 and D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D56 Modular Packing System consists of two D28 DrySpec dual-opening drybags. The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips but is...
Replace the original horn on your motorcycle with the attention grabbing DENALI SoundBomb Compact Dual-Tone Air Horn Kit. As the name implies the SoundBomb emits a loud blast that is nearly impossible to ignore by even the most distracted motorists and with 120 decibels of sound output measured at 3 feet the SoundBomb is 4 times louder than a standard motorcycle horn. Designed specifically for motorcycles this horn...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. The D20 also features a rigid core construction that allows the bags to retain their shape even when empty and makes packing and unpacking super easy.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The MRA SpeedScreen windscreens are available in clear smoke gray and gloss black. 12.2" (309mm) tall x 15.75" (398mm) middle width x 13" (330mm) top width.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Barkbusters STORM Single Point Bar End Mount Handguard Kit for 7/8in or 1in Hollow Handlebars - STM-005 provide wind weather and debris protection for your hands. A tough aluminum backbone bolts to each side of the bar to securely support aerodynamic plastics that create a “protective pocket” for each hand. The plastic deflectors and rigid backbones transform your exposed handlebar into a friendlier cockpit that ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Impress all your friends with the classic design of this stylish 100% cotton heavyweight T-Shirt. Includes Twisted Throttle logo. You too can be trendy and twisted.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
If you're fabricating your own Givi Monokey siderack and need the specialized Givi Monokey mounting hardware pieces this is what you need. Includes 1 pyramid clamp 2 mushroom spacers rubber bumpers and standard attachment hardware.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Developed with the feedback of racers and road riders alike R&G's latest generation of Aero Knee Sliders are constructed from a special blend of composite materials to ensure the riders get the best overall performance available. The high-density polyurethane material provides the ideal "sliding action" needed for aggressive street riders and trackday enthusiasts alike. The Aero Knee Sliders attach to your leathers w...
Adapter kit required for attaching plastic Hepco & Becker sidecases (Journey Junior Gobi Strayker) to SW-MOTECH Quick-Lock sideracks. Includes all hardware required to mount one pair of sidecases to your sideracks.
The GIVI M3 Monokey Plate features a flat design with strong nylon construction and a matte black finish. This plate works only with GIVI F series top racks and all Monokey top cases.
The Givi M5 Monokey Plate features a streamlined design with rugged nylon construction a black matte finish and is compatible with FZ or SR series GIVI top racks and all Monokey top cases.
R&G Micro Indicator turn signals (pair). Includes 10 watt incandescent bulbs; replaces original 10 watt or 21 watt incandescent turn signals. Designed to fit the R&G line of "Tidy Tail" fender eliminators.
For use with Pro Taper SE (seven-eighths) alloy handlebars and other aluminum handlebars with a smaller internal diameter than standard steel handlebars.
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch. This ...
Note: The Givi E68 Backrest for E36 or E45 luggage cases has been discontinued and is no longer able to be ordered.High-density black rubber backrest for the Givi E45 & E36 luggage case. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue. Mounts using included studs and nuts. Requires minor drilling of the topcase using the supplied pa...
Bright red brakelight kit (red diodes) for the Givi V46 and V46NT topcases. Significantly increase safety and visibility by raising and brightening your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks.
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch.
Includes 1 pair of interchangeable replacement lid panels for the Givi V35 PLX sidecase. Same as original matte black color panel from V35N; does not include complete replacement lid.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans including Akropovic oval exhausts.
Includes two 1/2" (12.7mm) tall M5 spacers and two M5x30mm lenshead screws. Used to level out the tank bag on certain Quick-Lock tank bags when used on particular bikes.
High-density black rubber backrest for the Givi Trekker cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
This GIVI 3-Case Lock Set with 6 Matched Keys includes three lock cylinders to match the keys for three GIVI cases - for example two side cases and a top case.
GIVI's Universal E-series adapter plate is designed to add a GIVI Monokey topcase to most existing flat rear luggage racks. The honeycomb matrix permits multiple options for matching the hardware through-bolts to gaps in your bike's stock luggage rack.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Requires Barkbuster Hand Guards specificy bike prior to ordering this product.
This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW Ducati and other European motorcycles with a Can-BUS electrical system and a "City Light" 194 marker bulb in the headlight. Please Note: Only compatible with bikes that use a 194 marker bulb and have a "universal" bulb connector; will not fit bikes wi...
The RAM "Magnetic Power Plate III" is designed to hold various devices including radar detectors and cellphones. The magnetic plate includes two powerful rare earth magnets rubber cradle and two adhesive metal plates. To mount your device to the magnet you will need to attach one of the metal plates to the back of your device. Includes a rectangular 50mm x 38mm x 0.08mm thick metal plate with adhesive back. This kit...
This R&G Reservoir Sock for Clutch & Brake Fluid | Black will act as a sponge if your brake or clutch fluid should overheat and overflow the reservoir keeping this ultra slippery & corrosive fluid off of your tires and away from painted surfaces. It simply fits straight over your clutch or brake reservoir keeping them and you well protected. Made from black elasticated terry cloth fabric with a white sewn R&G ...
Add 180 grams of mass to the end of each of your handlebars to reduce vibration. Barkbuster Bar End Weights are compatible with full-wrap Storm and VPS hand guards. They will not mount to the motorcycle by themselves they work in conjunction with Barkbuster full wrap hand guards.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
