These "Cotton Reel" swingarm spools mount to the paddock stand mounting points on the rear swingarm and are suitable on a wide range of Aprilia Ducati Triumph and Yamaha motorcycles. - M6 mounting bolt.
The GIVI BF05 Tanklock motorcycle specific mounting ring allows the Givi Easy Lock tankbags to hover over your tank to protect the finish. To be used on Cagiva MV and Yamaha motorcycles.
If you are tired of looking at your shoulders the R&G Mirror Risers will raise your motorcycle mirrors 45mm and allow you to see what you are leaving behind.
A drop can be either a great story or an expensive experience that could leave you stranded. Keep the odds in favor of great stories with the protection and good looks of the R&G Aero Style Frame Sliders.
Fork damage is not only expensive but can put a quick end to your well planned adventure. Prevent damage to the fork bottoms and brake calipers of your motorcycle with R&G Fork Protectors.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Keep your controls and knuckles protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Designed specifically for the Yamaha XSR900 FJ-09 & FZ-09 the heat treated aluminum backbones with double mounting points on each side of these guards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors available in multiple...
This GIVI 01SKIT makes it possible to secure the Smart Bar or Smart Mount GPS holder on your motorcycle. Bike specific hardware allows fitment on the bikes listed below. This kit makes it possible to fit the Smart Bar...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Rox Handlebar Risers With Extended Stem For 28mm Bars On Yamaha FZ-09 MT-09 & XT1200Z Super Tenere allow you to adjust the position of your handlebars instead of adjusting your posture to them. The extended stem at the bottom of the risers is specifically designed for the angled bar clamps of the FZ-09 and the XT1200Z; The extension ensures that there is enough surface area for a secure mount. These ergonomics enhan...
This Kaoko Throttle Stabilizer Cruise Control was created to maximize the enjoyment of your ride. Designed to reduce fuel consumption and facilitate speed maintenance this accessory is a must have for any rider who is serious about getting the most out of a trip. Which is everyone right? Stop worrying about that speedometer and enjoy a smooth ride with the help of this throttle lock.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This in-line triple motorcycle is your sport touring companion. With a set of tank traction grips installed maneuvering your FZ-09 on the highway or in busy city traffic becomes easier and less tiring. These grippy pads allow you to grip your tank and maintain a steady seat so you can concentrate on the road ahead and improve your steering/braking manipulation.
This soft and durable material sticks to ...
With the Givi CV47G730 replacement lid panel there is no need to purchase an entire new case if your new motorcycle is silver. This cover will blend in with the look of your motorbike nicely. The glossy silver finish is stylish and trendy.
With high tech carbon fiber guards and full wrap heat treated aluminum bars the Barkbusters CARBON handguards provide high strength lightweight and stylish protection for your hands and levers. Designed specifically for your motorcycle these lever protectors use a solid aluminum backbone mounted with a two point mounting system. Ride longer and more stylish with the CARBON handguards by Barkbusters.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G fender extender for Yamaha FJ-09 will keep your motorcycle cleaner while enhancing protection of the radiator exhaust headers and coolant reservoir. Lightweight yet sturdy ABS plastic diverts stones dirt and other debris that is flung from the front tire. Included adhesive tape and pop rivets make installation a breeze. Available in gloss black or "Carbon Look" choices. Protect your rig with this indispensab...
Preserve the finish and prevent paint damage to your swingarm caused by everyday use by adding the R&G boot guard kit. R&G uses a durable low profile synthetic rubber to inhibit wear and scratches while also being safe for your boots. This three piece kit uses an adhesive that stays put without harming your motorcycles finish to ensure maximum protection. Install an R&G boot guard kit and protect your motorcycle for y...
The R&G stainless steel air intake covers for Yamaha FZ-09 / MT-09 provide debris protection while enhancing aesthetics. High quality corrosion resistant alloy is laser cut for a precise fit and finish. These attractive intake covers are easy to install without the need for modifications. Mounting takes only a few minutes. Add some style and protection and bolt on the R&G stainless steel air intake covers on your FZ-0...
The R&G Tail Tidy fender eliminator will clean up the back end of your motorcycle. This handy unit is constructed out of stainless steel and is finished with a black powder coat for added protection and good looks. Replaces the large and cumbersome plate holder on the stock cantilevered mount.
Prevent tipovers by providing a larger surface area for your kickstand with the R&G Side Stand Foot Enlarger for your Yamaha FZ-09 MT-09 & Tracer. Hot asphalt or packed dirt has a nasty habit of giving way under the load of a motorcycle. By increasing the contact area and spreading the weight out the stand is less likely to pierce the surface and dig in. Keep your motorcycle from laying down on the job with a side st...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The MRA Motorcycle Windshield NRM Racing Screen is specially made for your Yamaha FZ-09 / MT-09. This high quality windshield is designed to perform like a sport screen but has the looks of a race screen. The NRM style will enhance the aerodynamics high-speed stability and aesthetics of your motorcycle. The profile has been developed through extensive wind tunnel testing to significantly decrease pressure on the...
The aerodynamically shaped GIVI A2132 windscreen improves riding comfort and increases wind protection on your otherwise naked Yamaha FZ-09 or MT-09 motorcycle. This screens sleek smoke tint looks great on your motorbike and the vibration absorbing Plexiglass acrylic construction resists cracking. To install this replacement screen on your motorcycle GIVI has included a specific fitting kit that ensures a secure
...
Provide added protection and style to your motorcycle with GIVI TN2132 Crash Bars Engine Guards for the Yamaha FZ-09 or MT-09. With clean lines and a great looking powder coated black finish as well as solid mounts and 25mm diameter steel tube construction designed to protect your tank in the event of a tip-over this could be the best-looking insurance you could get for your machine. Bolt on the peace of mind and rug…
Grab the GIVI IN2132KIT turn signal relocation kit when installing a set of the GIVI TST side racks on your Yamaha FZ-09 or MT-09. This system moves your original indicators to not only make room for the pannier holders but to ensure your flashers have the best visibility. Installation is easy; all mounting hardware and easy to follow instructions are included.
The GIVI TST2132 Sport-T saddlebag holders will securely support a set of the Sport-T Multilock panniers on your Yamaha FZ-09. These side racks are easy to install and will blend in with the styling of your motorcycle. Grab the GIVI TST2132 Sport-T saddlebag holders to add 44 liters of carrying capacity to safely bring your rider essentials along on your escapade. To complete that installation of the GIVI T...
The GIVI PR2132 Radiator Guard for Yamaha FJ-09 FZ-09 & MT-09 provides essential protection to the most vulnerable and crucial component of the cooling system. Stainless steel construction is finished in black powder coat for a sleek look that is also easy to clean. This protective guard permits maximum airflow while deflecting bugs stones and other debris which is commonly thrown by other traffic and the motorcycle...
If you're looking for a strong and secure mounting solution for your GIVI Monokey or Monolock top cases on your Yamaha FZ-09 then check out the GIVI 2132FZ top rack. This rear luggage rack uses monorack style arms that securely attach under your motorcycles pillion. GIVI uses sturdy steel to construct the supports and black powder coats them for a durable and great looking finish. Once the rack is installed attach
...
The GIVI HP2115 Hand Protectors for Yamaha FZ-07 MT-07 MT-09 & FZ-09 provide protection from wind weather and debris to enhance safety and comfort on every ride. Durable ABS plastic construction is lightweight and molded to integrate perfectly with OEM components. If you've ever had a stone kick up and hit your knuckles while traveling down the highway you know how painful and dangerous riding without hand guards ...
The R&G aero style frame sliders for the Yamaha FZ-09 & MT-09 provide essential protection during fall or slide by keeping critical components from contacting the ground. High Density Polyethylene (HDPE) bobbins are abrasion resistant and impact absorbing and designed to be the first point of contact with the pavement to prevent road rash and other severe damage. These protective sliders are mounted to the...
Your engine case is vulnerable to impacts incurred in a crash or slide so protect it with the R&G engine case slider. These sliders are crafted using lightweight durable and robust high density polypropylene. This material takes the impact rather than your expensive engine case and saves you an expensive trip to the mechanic. R&G uses innovative technologies to closely examine your bike ensuring an exact fit of
...
Your engine case is vulnerable to impacts incurred in a crash or slide so protect it with the R&G engine case slider. These sliders are crafted using lightweight durable and robust high density polypropylene. This material takes the impact rather than your expensive engine case and saves you an expensive trip to the mechanic. R&G uses innovative technologies to closely examine your bike ensuring an exact fit of thei...
Significantly enhance the appearance of your motorcycle with the R&G Tail Tidy fender eliminator for your beloved Yamaha FZ-09 or MT-09. This powder coated stainless steel assembly replaces the entire stock rear fender and taillight mount offering a much cleaner appearance with the license plate tucked much closer to the Yamaha's graceful tail section. The original turn signals can be retained but upgrading to lower ...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Frame sliders are an essential piece of protective equipment and highly recommended to minimize damage during a fall tip over or slide. R&G frame sliders for your Yamaha are designed to be the first point of contact to prevent the fairing frame engine cases and other critical components from being compromised. Impact absorbing and abrasion resistant HDPE (High Density Polyethylene) bobbins are bolted securely...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G radiator guard for your Yamaha FZ-09 or MT-09 safeguards the most vulnerable component of the cooling system from bugs stones and other debris. Lightweight aluminum mesh is surrounded by a seamless frame and powder coated in black green or titanium colors for enhanced durability and corrosion resistance. This essential radiator guard preserves hundreds of fragile cooling fins so airflow is maximized w...
Add cruise control to your motorcycle with the Kaoko throttle lock. A cinch to install and even easier to use the Kaoko works when you simply twist the knurled lock to hold your throttle steady. Rolling off the throttle loosens the lock and allows for normal throttle action. Reduce fatigue and strain on your wrists with the Kaoko throttle lock cruise control.
The R&G Stainless Steel Radiator Guard is a more robust radiator guard designed to handle some serious riding. Constructed from 1mm stainless steel the radiator guards are incredibly strong and impervious to rust. The laser-cut grill is designed for maximum airflow to the radiator and perfectly compliments the look of your bike! The guard attaches to your bike easily by utilizing existing mounting points. Give your...
The R&G headlight shield for Yamaha FZ-09 & MT-09 safeguards the expensive headlight lens from damage. Strong acrylic construction 2.5mm thick defends against bugs stones and projectile debris to prevent scratches scrapes and surface pitting. This sleek headlight shield does not require mounting brackets or modifications to keep your expensive OEM lens safe as they are neatly secured with transparent Dual Loc...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and controls with the Barkbusters Storm lever and weather protection handguards. The full-wrap heat-treated bars are crafted from solid aluminum with secure two-point mounts on each side for sturdy installation. These handguards provide enough coverage to keep your hands and controls from getting beat up by the elements and can also help to avoid accidental activation of your controls when ridin...
Today's newest motorcycles are more likely to have flat-panel instrument displays than conventional mechanical gauges. And like your cell phone it's worth the effort to protect the often fragile and scratch-prone screen face with the new R&G Second Skin Dashboard Protection kit. Made from high quality anti-scratch material the R&G screen protector kit has been designed to preserve the clarity of your mo...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
These MFW bike-specific mounts allow you to install MFW adjustable footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in black or silver.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
These MFW bike-specific mounts allow you to install MFW adjustable footpegs for the passenger on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in black or silver.
Add a pair of GIVI frame sliders to your Yamaha FZ-09 or MT-09 with the SLD2132KIT fitting kit. What's in the box: Bike-Specific mounting materials for GIVI Frame Sliders Installation instructions
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Characterized by an aerodynamic design and made with high quality materials GIVI'S replacement frame sliders provide protection and offer a high quality fit and finish. The absence of screws not only improves the aesthetic of the sliders but also allows for easy assembly and disassembly.
The SW-MOTECH SLC side carriers form part of a comprehensive soft-luggage set for a wide range of bikes. Use them to mount a set of Legend Gear LC1 (9.8 liter) or LC2 (13.5 liter) side cases the sleek 16.5-liter ABS-shell Urban cases or the SysBag 10 (10 liter) or 15 (15 liter) cases. Simple in concept the SLC carriers are made from sturdy powder-coated steel for enduring strength and good looks. They mount...
Provide light protection for your motorcycle's levers with Barkbusters Aluminum Bar Single Point Bar End Mount Handguard Kit for motorcycles with 6mm & 8mm internally threaded bar ends. Add a set of Barkbusters JET VPS STORM or CARBON guards to provide wind and weather protection or to simply finish the look. Give your motorcycle the insurance it deserves with an aluminum bar single point bar end mount handguard kit...
This Rear Tyre Hugger is suitable for the Yamaha MT-09 '17-'20 & MT-09 SP '18-'20Designed using the latest 3D scanning technologies for an exact fit and easy installation.Made in the U.K.
The smooth style and narrow profile of the E340 topcase features a durable finish making it a great choice for all types of bikes -- whether sport cruiser dual-sport or standard. With a 34 liter luggage capacity this case is an excellent topcase choice as it nicely complements all of the popular GIVI sidecases (E21 E36 and the E360). Note that this topcase features the GIVI Monolock design which means it mus...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The sleek aerodynamic design of the Givi V46 Delux makes it a popular choice for most of today's modern motorcycles. The V46 has a wide perimeter band with an attractive red accent and an easy-to-grip handle. The aerodynamic style deceptively hides a spacious 46 liter carrying capacity. This case is an excellent choice as a topcase especially when complemented with either the E41 or E21 Cruiser sidecases.
The new GIVI Trekker 52 liter top case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening).
The R&G paddock stand for the rear lifts the swing arm with the use of 6mm or 8mm cotton reels or spools to get the tire off of the ground while performing maintenance or during storage. High strength FE360 tubular steel serv...
The sleek aerodynamic design of the Givi V47NT makes it a popular choice for most of today's modern motorcycles featuring an aluminum center panel and smoke lenses. The aerodynamic style deceptively hides a spacious 47 liter carrying capacity. This case is an excellent choice as a topcase especially when complemented with the V35 sidecases.
The sleek aerodynamic design of the Givi V47N makes it a popular choice for most of today's modern motorcycles featuring an aluminum center panel and red lenses. The aerodynamic style deceptively hides a spacious 47 liter carrying capacity. This case is an excellent choice as a topcase especially when complemented with the V35 sidecases.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The sleek aerodynamic design of the Givi E360 Delux makes it a popular choice for most of today's modern motorcycles. The E360 has a wide perimeter band with an attractive red accent and an easy-to-grip handle. The aerodynamic style deceptively hides a spacious 40 liter carrying capacity. This case is an excellent choice for a topcase.
The sleek aerodynamic design of the Givi V47NN makes it a popular choice for most of today's modern motorcycles featuring a faux carbon fiber inlay and red accent lenses. The aerodynamic style deceptively hides a spacious 47 liter carrying capacity. This case is an excellent choice as a topcase especially when complemented with the V35 sidecases.
The sleek aerodynamic design of the Givi V47NNT makes it a popular choice for most of today's modern motorcycles featuring a faux carbon fiber inlay and smoke lenses. The aerodynamic style deceptively hides a spacious 47 liter carrying capacity. This case is an excellent choice as a topcase especially when complemented with the V35 sidecases.
These padded strips have an adhesive backing and offer protection and grip when strapping dry bags or expansion bags to the top of your side cases. The strips are about 1/8" thick and are made from a foam rubber with a grippy texture bonded to the top. Construction is similar to a typical mouse pad. Package includes 3 strips (enough to cover a single case).
The new GIVI Trekker 52 liter top case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market.
The RAM-B-149Z-UN8U consists of a U-bolt base double socket arm and universal X-Grip II for 7" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip II holder expands and contracts allowing for a perfect custom fit of you...
Use these compact LED strips as accent lighting or to increase nighttime visibility. Each 70mm adhesive-backed LED strip contains 15 LEDs and draws only 0.11 Amps.
This DENALI Bar Clamp Light Mount Kit allows fitment of any DENALI LED Lights to the outer fork tube on motorcycles, or any tube 50mm-60mm (2"-2.375") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.
These clamps are intended for motorcycles with exposed inverted forks such as enduro, dual sport, and naked motorcycles. The clamps allow lights to be mounted in front of, or to each side of the fork tubes to ensure clearance with fairings and other accessories. The clamps are also perfectly sized to clamp to the lower legs of conventional forks, typically found on many cruiser and standard motorcycles.
Features
Adjustable Grip Range (50mm-60mm)
60mm Light Shelf length
Rotatable Mounting Shelf allows 4th axis of adjustability
Lights can be mounted to shelf or directly to clamp
Accepts M8 Bolt from Light Pod
Billet Aluminum with Black Anodized Finish
What's In the Box?
(x2) Mounting clamps
(x2) Rotatable mounting shelf’s
(x1) Hardware kit
Instruction Manual
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Givi V56 Maxia 4 56 Liter Monokey Topcase is the fourth generation of the Maxia line with modern angular design and internally strengthened ABS plastic construction. Look no further if you like to bring everything with you this luggage case is able to swallow two full face helmets with room left over for additional gear. The V56 will keep your belongings safe from bad weather and thieves with a full gasket su
...
$205.00Original price was: $205.00.$184.50Current price is: $184.50. USD
Free Delivery
Available to backorder
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Givi V40 Monokey Topcase is an excellent choice for hard luggage on any motorcycle. Available with red or smoked reflective lenses to suit your style and enhance visibility. The case body is finished in matte black and is compatible with the Givi Monokey system that allows the luggage to be opened closed locked and removed from the rack with the same key. When locking the lid the bag itself is also locked to th...
The Givi STTR40 Universal GPS Holder is designed to mount the TOM TOM Rider 40 or 400 to any tube diameter from .31" to 1.3". This navigation mount can be attached to handlebars mirror stalks or crossbars so you can find the perfect spot to keep your information within sight. The STTR40 comes with all the hardware required for mounting.
Givi E96 Top Luggage Rack For E52 Maxia E52 Maxia Tech E55 Maxia and E55 Maxia Tech Topcases Transform your E52 Maxia E52 Maxia Tech E55 Maxia and E55 Maxia Tech Topcase lid into a secure base for attaching those lighter and bulkier items (ground cloth bedroll etc). By using a few mounting straps you can quickly attach these items to this attractive and durable metal rail top luggage rack. Giv...
Givi E159 Top Luggage Rack For Givi V47 & V56 Topcases
If you have any of the Givi V47 or Givi V56 Maxia topcases you can add this well constructed and sturdy top luggage rack. The rail style rack is manufactured using mild steel and coated black for an attractive and durable finish. Simply drill a few holes (according to the included template) and attach the rack with the mounting hardware supplied. Y
...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Givi B360 Monolock Topcase (Ea) - 36 Liters/Case With a carrying capacity for either 1 modular helmet and some other riding essentials or 2 Jet helmets with an extra jacket liner on top the Givi B360 is just the right size for your scooter or smaller commuter motorcycle. The B360 has 36 liters of space and can hold up to 6.5 lbs. Givi designed this case to have a sleek and modern look and atta...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The B47 Blade topcase offers a whopping 47 liters of storage and can fit two open face helmets. This topcase features a new sealing system that increases the water resistance and the distinctive angled reflectors add some modern aesthetic appeal.
This Givi topcase will install easily to a Givi or SW-MOTECH type toprack and includes a Monoloc...
Givi E81B Top Luggage Rack For Givi E360 & E460 Topcases
Increase the carrying capacity of your Givi E360 or E460 topcase with this sturdy rail style top luggage rack. Givi manufactures this toprack out of mild steel and black powdercoats it back for a
...
Personalize your Givi V47 top case by grabbing a Givi CV47N replacement lid panel in a stylish matte black finish. Whether the lid cracked (due to an unfortunate spill) or you’re looking to match your motorcycles paint job this replacement cover will fit the bill. Customize your V47 top case today!
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Increase storage capacity for small items and important documents that are always within reach using the Givi leg wallet. Made of durable 600D polyester PVC and available in grey black or black/grey with red trim . Each color features reflectivity for enhanced visibility. Adjustable straps allow this versatile leg wallet to be worn around the waist or thigh for quick access that doesn't get in the way while on or of...
The Givi E300N2 Tour II monolock top case is the perfect companion for scooters or small displacement motorcycles. This top case is manufactured out of polypropylene so it is lightweight and durable. With details like the matte black finish and red lenses this top box looks great on the back of your motorbike or moped. Inside the E300N2 you can store 30 liters of rider essentials or one full face helmet...
The Givi E300NT2 Tour 11 tech monolock top case comes with a universal base plate that fits onto almost any motorbike or scooter that has a top rack. Inside this lightweight and durable polypropylene constructed top box there is enough room to transport one full face helmet. This top case quickly removes from your motorcycle using the key. This monolock top case is especially suited to the scooter line up or smalle...
The Givi E107B top luggage rack is designed to fit the Givi V46 and Givi V46NT tech top cases. The top rack allows you to quickly and securely add lighter bulky items
...
The Givi E142B motorcycle luggage rack for TRK52N top case is a bike-specific top mounting system to fit the Trekker 52 liter top case. This mount is compatible with most of the Monokey series of luggage systems. The powder-coated mild steel motorcycle luggage rack comes complete with all mounting hardware including 4 screws and 4 wash...
If you have a GIVI V47 or V56 Maxia top case installed on your motorcycle you can get the GIVI CV47R300 replacement lid cover panel. This gloss red interchangeable panel inserts into the lid of the luggage and adds a splash of color or integrates into your red color scheme....
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G lever guard universal fit 13-21 mm ID mounts to the end of a hollow handlebar or clip on to provide protection from accidental brake or clutch lever activation. Sturdy Zytel Nylon construction safeguards against elbow impacts in tight racing scenarios that could cause a loss of drive (clutch) or even worse a violent front flip (front brake). This critical lever guard can also be used on street bikes to preven...
Designed with the adventure motorcyclist in mind the GIVI DLM46A Trekker Dolomiti 46 liter top case was crafted to be rugged and waterproof. GIVI uses die stamped aluminum to fabricate a deep-drawn base and lid while stainless steel rivets hold everything together. The rounded shape is not just a style choice; smoother surfaces and angles can significantly improve the safety of the rider and anybody around them. Th...
The GIVI DLM30A Trekker Dolomiti is a 30L box that can be used as either a top or side case. GIVI fabricates this case using hybrid die stamped aluminum and secures all the pieces using stainless steel rivets. Left with the natural aluminum finish this box is rugged waterproof and perfect for the adventure motorcycle rider. The rounded shape is not just a style choice; smoother surfaces and angles can significantl...
The GIVI E470NTA Tech Monolock top case features a 47-liter volume black embossed lid and wide smoke tinted reflectors. This rear luggage box can be mounted to any motorcycle rear luggage rack with a flat surface with the included GIVI universal adapter plate. This modern looking top case is the perfect choice for small to mid-sized cc motorcycles. GIVI constructs this luggage case using Polypropylene which is a...
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
