The DENALI horn mount for the Yamaha Bolt Bolt R-Spec Bolt C-Spec & SCR950 Scrambler is a bike-specific mount kit for installing Denali SoundBomb Compact Dual-Tone Air Horn. All mounting hardware and instructions included. For easy wiring check out the Plug-n-Play wiring kit. Use this slick horn mount for the c...
LOUD! Stylish! Rugged!
Producing an earsplitting 120 decibels of sound the SoundBomb is 4 times louder than a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing the SoundBomb will practically disappear once installed.
The Givi STTR40 Universal GPS Holder is designed to mount the TOM TOM Rider 40 or 400 to any tube diameter from .31" to 1.3". This navigation mount can be attached to handlebars mirror stalks or crossbars so you can find the perfect spot to keep your information within sight. The STTR40 comes with all the hardware required for mounting.
$71.99Original price was: $71.99.$25.20Current price is: $25.20. USD
Free Delivery on orders over $50
In stock
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G lever guard universal fit 13-21 mm ID mounts to the end of a hollow handlebar or clip on to provide protection from accidental brake or clutch lever activation. Sturdy Zytel Nylon construction safeguards against elbow impacts in tight racing scenarios that could cause a loss of drive (clutch) or even worse a violent front flip (front brake). This critical lever guard can also be used on street bikes to preven...
$22.99Original price was: $22.99.$8.05Current price is: $8.05. USD
Free Delivery on orders over $50
In stock
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Impress all your friends with the classic design of this stylish 100% cotton heavyweight T-Shirt. Includes Twisted Throttle logo. You too can be trendy and twisted.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans including Akropovic oval exhausts.
The GIVI 240A windscreen for naked motorcycles is a stylish well-constructed windshield which improves aerodynamics comfort and protection. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles with round headlamps. Features light smoke tint that helps to reduce glare on the gauges in direct sunlight. Enhance every mile with the 240A windscreen from GIVI!
Buy 1 set for each Givi Monokey case you will be attaching to your bike. Includes: – 1 pyramid clamp – 2 attachment screws – 2 washers – 4 replacement rubber bumpers
Adapter kit required for attaching plastic Hepco & Becker sidecases (Journey Junior Gobi Strayker) to SW-MOTECH Quick-Lock sideracks. Includes all hardware required to mount one pair of sidecases to your sideracks.
Includes two 1/2" (12.7mm) tall M5 spacers and two M5x30mm lenshead screws. Used to level out the tank bag on certain Quick-Lock tank bags when used on particular bikes.
The Givi M5 Monokey Plate features a streamlined design with rugged nylon construction a black matte finish and is compatible with FZ or SR series GIVI top racks and all Monokey top cases.
$35.99Original price was: $35.99.$12.60Current price is: $12.60. USD
Free Delivery on orders over $50
In stock
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
You have the best gear that the Twisted Team has scoured from every corner of the globe. Take the next logical step and customize your bike further with this collection of light-safe weather-proof vinyl decals.
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch. This ...
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch.
The GIVI MM Monolock Plate features a flat design and is made from aluminum with a black finish. This plate works with all Monolock top cases and only GIVI F series top racks.
Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
Includes 1 pair of interchangeable replacement lid panels for the Givi V35 PLX sidecase. Same as original matte black color panel from V35N; does not include complete replacement lid.
High-density black rubber backrest for the Givi Trekker cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
The M5M Monolock Plate is a streamlined adapter with durable nylon construction. This is compatible with all Monolock top cases and GIVI FZ series top racks.
GIVI's Universal E-series adapter plate is designed to add a GIVI Monokey topcase to most existing flat rear luggage racks. The honeycomb matrix permits multiple options for matching the hardware through-bolts to gaps in your bike's stock luggage rack.
If you're fabricating your own Givi Monokey siderack and need the specialized Givi Monokey mounting hardware pieces this is what you need. Includes 1 pyramid clamp 2 mushroom spacers rubber bumpers and standard attachment hardware.
Replace the bars for your motorcycle's Barkbusters EGO Handguards. EGO lever protection by Barkbusters provide a close fit in order to enable tighter trail riding. EGO Handguards are ideal for Enduro, Trail and mini bikes but are not suitable for motorbikes with full length levers due to the narrow clearances provided by the smaller profile.
The GIVI M3 Monokey Plate features a flat design with strong nylon construction and a matte black finish. This plate works only with GIVI F series top racks and all Monokey top cases.
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
Note: The Givi E68 Backrest for E36 or E45 luggage cases has been discontinued and is no longer able to be ordered.High-density black rubber backrest for the Givi E45 & E36 luggage case. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue. Mounts using included studs and nuts. Requires minor drilling of the topcase using the supplied pa...
LED brakelight kit for the new Givi E55 Maxia 3 topcase. Significantly increase safety and visibility by raising and increasing your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks (Wingrack Monorack and E250 mounting plates).
This GIVI 3-Case Lock Set with 6 Matched Keys includes three lock cylinders to match the keys for three GIVI cases - for example two side cases and a top case.
Adapter kit required for attaching Shad sidecases to SW-MOTECH Quick-Lock EVO carrier. Includes all hardware required to mount one pair of sidecases to your sideracks.
Givi's first PLX-style sidecase! For use only with Givi PLX sidecarriers or SW-MOTECH Contour sidecarriers; not for use with Givi Monokey standard SW-MOTECH sidecarriers or Five-Stars sidecarriers. Clear lens.
Bright red brakelight kit (red diodes) for the Givi V46 and V46NT topcases. Significantly increase safety and visibility by raising and brightening your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks.
This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW Ducati and other European motorcycles with a Can-BUS electrical system and a "City Light" 194 marker bulb in the headlight. Please Note: Only compatible with bikes that use a 194 marker bulb and have a "universal" bulb connector; will not fit bikes wi...
This stylish well-constructed windscreen features improved height and shape with top-notch quality. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles using a 2-point handlebar mount and front fork mount (up to a 50mm fork tube diameter). Mount included. Shape fits a 7" diameter light bulb (8" diameter can) headlight. Features light smoke tint and precision-cut shape. <...
High-density black rubber backrest for the Givi B33 cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
The new GIVI Trekker 46 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch. This kit is a...
Includes bottom brakelight connector that attaches to a standard Givi Monokey or Monolock top plate as well as a wire to attach the connector to your motorcycle's wire harness.
Includes top brakelight connector that installs within the bottom shell of your luggage case as well as a wire to attach the connector to your Givi brakelight.
Designed for use with complete kits for fitment to Aprilia Pegaso. KTM models with (1) Magura or Renthal handlebars AND (2) Brembo clutch activators. Optional part for KTM models with Brembo clutch master cylinder. Increases clearance around the clutch or brake hose area. Can also be used to increase clearances where brake and clutch lines are in the way.
Bright incandescent brakelight kit for the Givi E30 topcase. Significantly increase safety and visibility by raising and brightening your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks.
High-density black rubber backrest for the Givi E370 luggage cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
High-density black rubber backrest for the Givi E470 luggage cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
High-density black rubber backrest for the Givi E460 Delux luggage case. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
High-density black rubber backrest for the Givi E450 or E35 luggage case. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
Bright incandescent brakelight kit for the Givi E460 Delux topcase. Significantly increase safety and visibility by raising and increasing your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post '00) Givi-manufactured topracks (Wingrack Monorack and E250 mounting plates).
Soft gel backrest for the Givi E52 and new V46 topcases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue. Black.
Bright incandescent brakelight kit for the Givi E370 topcase. Significantly increase safety and visibility by raising and brightening your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post '00) Givi-manufactured topracks.
Fits only Givi V46 and E52 topcases; not for other luggage case models. Keys can only be ordered as blanks and cannot be pre-cut by Givi to specific key numbers.
This black elastic bungee net is perfect for securing a helmet or other items to the top of your topcase rear luggage rack or passenger seat. Steel bungee hooks are coated in rubber to protect your motorcycle.
High-density black rubber backrest for the Givi E350 Flow E30 and E300N2 luggage cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
The smooth style and narrow profile of the E340 topcase features a durable finish making it a great choice for all types of bikes -- whether sport cruiser dual-sport or standard. With a 34 liter luggage capacity this case is an excellent topcase choice as it nicely complements all of the popular GIVI sidecases (E21 E36 and the E360). Note that this topcase features the GIVI Monolock design which means it mus...
Five pin relay for many automotive applications. Rated for 30-amps of 12-volt DC current. Offered as a replacement part for the Denali SoundBomb Compact Dual-Tone Air Horn.
This DrySpec Motorcycle Tool Tube Kit attaches directly to the outside of any flat-sided sidecases and can be used to carry our MSR 30 oz. Fuel Bottle and any other gear that can fit inside of it.
Made from heavy-duty 3mm thick 1-inch (26mm) wide strips of steel. Inner hole diameter is 5/16-inch (8mm). Center-to-center hole distance is 3 inches overall length of bracket is 4 inches. Powder-coated flat black. Sold each.
The DrySpec STASH BOX is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e. low cost concealed mounting location vehicle styling is unaffected and easy accessibility.
This sticker is retro in more ways than one. Besides being RETRO-reflective it is also reminiscent of the cold war era and it's nuclear symbol. Made of vinyl this sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. We have even spotted a few of these as "protectors" for a certain round german motor...
Makes changing accessories a snap! Mount the device to the Quick Change plate and then slide it onto any ROUND TechMount top plate and it locks into place with a spring loaded locating pin. Simply press the pin to release the adapter and slide off to remove.
$22.99Original price was: $22.99.$8.05Current price is: $8.05. USD
Free Delivery on orders over $50
In stock
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Clear Shot is an all-in-one compact anti-fogging/lens cleaning kit that is perfect for safely cleaning all types of lenses including goggles and helmet visors.
The Interphone SSC GPS43 water-resistant GPS universal holder is for motorcycles with non-tubular handlebars found on scooters and motorcycles. This case fits devices up to 4.3 and offers secure mounting by using a sturdy rubber strap and an adjustable belt. The angle is adjustable using the snap-on bayonet clip. The SSC43 system is easily removable for use on other motorcycles and is also equipped with a quick-release lever for rapid removal.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
