Carry more luggage, travel more comfortably, be more visible and protect your Triumph Rocket III Roadster & Rocket III Touring with motorcycle accessories from Twisted Throttle.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your motorcycle from road debris and dirt with the R&G Fender Extender. Crafted from durable ABS plastic this guard is designed to block stones grit mud and water kicked up by the front wheel adding protection to your cooling system engine case exhaust pipes and fairing panels. Simple to install this kit mates directly to your motorcycle's front fender or mud shield using adhesive strips and push riv...
Provide light protection for your motorcycle's levers with Barkbusters Aluminum Bar Single Point Bar End Mount Handguard Kit for motorcycles with 6mm & 8mm internally threaded bar ends. Add a set of Barkbusters JET VPS STORM or CARBON guards to provide wind and weather protection or to simply finish the look. Give your motorcycle the insurance it deserves with an aluminum bar single point bar end mount handguard kit...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
The DENALI DOT approved M5 LED Headlight module is a direct plug and play replacement to your original 5.75 inch sealed beam headlight. It features a super wide low beam piercing high beam and halo day time running light. Drop this headlight module inside your motorcycle's existing headlight housing to throw a blazing beam of light three times further than your stock halogen headlight and twice as far as a stock...
The DENALI DOT approved M7 LED Headlight module is a direct plug and play replacement to the original 7in sealed beam headlight on your motorcycle. It features a super wide low beam piercing high beam and halo day time running light. Drop this headlight module inside your existing headlight housing to throw a blazing beam of light three times further than your stock halogen headlight and twice as far as a stock L...
The R&G Cruiser Style Heated Grips are designed for 1" diameter handlebars found on most Harley Davidson and metric cruisers. The digital thermostat is easy to use and offers 5 levels of heat to find the optimum temperature that will keep your hands comfortable and warm. Chrome end caps provide an elegant appearance to any cruiser while extending your riding season and enhancing riding comfort in colder weather...
Increase your ability to be seen at night with the R&G self adhesive license plate reflector. With a 4cm (1.57in) diameter you can mount this just about anywhere you want to catch the attention of a wandering mind. Keep the odds in your favor by installing a license plate reflector by R&G on your motorcycle before your next night ride.
Provide lightweight and stylish weather protection for your hands with Barkbusters CARBON Single Point Bar End Mount Handguard Kit for motorcycles with 6mm & 8mm internally threaded bar ends. Coated for UV protection the hand laid genuine carbon fiber guards look as well as they perform. Give your motorcycle the high-tech look it deserves with a CARBON single point bar end mount handguard kit by Barkbusters.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Provide lightweight and cost effective protection for your hands with Barkbusters JET Single Point Bar End Mount Handguard Kit for motorcycles with 6mm & 8mm internally threaded bar ends. Impact resistant deflectors provide shelter for your hands from weather wind and light brush and are held securely in place with heat treated aluminum bars. Give your hands a break with a JET single point bar end mount handguard kit...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Provide lightweight and cost effective protection for your hands with Barkbusters VPS Single Point Bar End Mount Handguard Kit for motorcycles with 6mm & 8mm Internal threaded bar ends. High impact resistant deflectors provide shelter for your hands from weather wind and light brush and are held securely in place with heat treated aluminum bars. Protect your hands with a VPS single point bar end mount handguard kit b...
The DENALI E-Mark approved M5E LED Headlight module is a direct plug and play replacement to your original 5.75in sealed beam headlight. It features a super wide low beam piercing high beam and halo day time running light. Drop this headlight module inside your motorcycle's existing headlight housing to throw a blazing beam of light three times further than your stock halogen headlight and twice as far as a stock...
The DENALI E-Mark approved M7E LED Headlight module is a direct plug and play replacement to the original 7in sealed beam headlight on your motorcycle. It features a super wide low beam piercing high beam and halo day time running light. Drop this headlight module inside your existing headlight housing to throw a blazing beam of light three times further than your stock halogen headlight and twice as far as a sto...
Give your hands and levers a break with Barkbusters Storm S7 wind and weather protection handguards for 6mm or 8mm internal threaded handlebars. These guards are designed to provide you comfort when riding in the elements or through narrow trails where brush can scrape up your hands or whack your levers. When you mount these motorcycle handguards for wind protection on your bike you will also enjoy not be...
This DENALI Fork Tube Light Mount Kit allows fitment of any DENALI LED Light Kit to conventional forks or any tube 39-49mm (1.5-1.8in) in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional fully rotatable mounting shelf to create a su...
This DENALI Engine Guard/Frame Light Mount Kit allows fitment of any DENALI LED Light Kit to engine guards frame tubes or any tube 32mm-38mm (1.25"-1.5") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional fully rotatable mounting...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Reduce rider fatigue due to wind pressure and turbulence with the MRA V-Flow X-Creen Sport Screen (style "VFXZ") windshield. The VFXZ is a taller touring sized windscreen with an X-Creen Sport attached to the top. The bottom edge of the VFXZ is designed for motorcycles with angular or dual headlights.
This DENALI Motorcycle Engine Guard/Crash Bar Light Mount Kit allows fitment of any DENALI LED Lights to engine guards crash bars or any tube 21mm-29mm (0.826in-1.125in) in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional fully rotatable mounting shelf to create a super versatile and robust light mount
...
Easy and inexpensive Plug-N-Play wiring kit for DENALI SoundBomb Compact Dual-Tone Air Horn (also works with the Stebel Air Horn) that does not require any cutting soldering slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire one lead to battery ground one lead to battery positive and plug in your horn's relay.
I...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The StreetShield is MRA's smallest screen specially designed to unobtrusively compliment the style of smaller on or off-road naked bikes. It offers good protection for the size. Dimensions: L 14.4" x W 9.3"
Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights these guards offer superb wind protection without limiting access to your grips or controls. Simple to install they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather ...
This DENALI 2.0 Premium wiring harness kit features high-quality waterproof components and is designed to power two DENALI 2.0 LED Light Pods. It features low profile water tight connectors and high quality molded wire to ensure moisture is kept out of the system. The harness includes a completely sealed waterproof switch that was engineered from the ground up to withstand harsh conditions on powe...
The DENALI 2.0 perch switch mount kit is used to fit the DrySeal waterproof switches to your clutch or brake perch. The kit includes everything needed to mount on M5 and M6 hardware in horizontal or vertical orientation.
The DENALI HI-LOW-OFF Switch replaces the standard ON-OFF switch. The switch enables independent dimming of the lights separate from the vehicle's OEM lighting system. This allows you to change from low intensity to full brightness on motorcycles with OEM LED headlights that don't have a clean 12V high beam trigger signal. This switch is also a great option for those who want full independent contr...
This premium DENALI DrySeal™ ON-OFF Waterproof Switch can handle a load up to 15 Amps and is ideal for controlling many different accessories like auxiliary lighting. The kit includes both ⅞” and 1” handlebar switch mounting bands as well as an adhesive pad for surface mounting. In addition to molded silicone gasket seals DENALI uses a unique DrySea...
This DENALI DataDim™ Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle’s original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so an external signal can reliably control the intensity of the LED chip at the source.
This DENALI Y-Splitter Kit powers two sets of DENALI 2.0 LED lights from one harness! The plug-n-play adapter simply plugs into the end of the DENALI 2.0 Premium 3-pin harness allowing control of two sets of lights
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The DENALI D4 2.0 LED light pod with DataDim™ technology was engineered from the ground up to create the brightest most efficient and durable LED lights. Specifically designed for powersports applications to focus on generating the most amount of light with the least amount of power draw from your motorcycle. The D4 is fitted with True-Hybrid™ lenses providing a combination of spot and flood patterns
...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA VarioScreen windscreens are available in clear smoke gray and gloss black. 19.3" (490mm) tall x 17.3" (439mm) middle width x 14" (355mm) top width.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The MRA Roadshield Classic windscreen is available in clear smoke gray gloss black blue red and yellow. It measures 12.5" (317mm) tall x 16" (406mm) at the widest point.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This MRA Vario Screen Type "A" motorcycle windshield has the same overall shape as the original Vario Screen but with a modified lower edge. Available in clear and smoke gray. 19.3" (490mm) tall x 17.3" (439mm) middle width x 14" (355mm) top width.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D106 Modular Packing System consists of the D38 DrySpec Rigid drybag the D28 Dual-End drybag and the D20 saddlebag set. The D38 D28 and D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D56 Modular Packing System consists of two D28 DrySpec dual-opening drybags. The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips but is...
Replace the original horn on your motorcycle with the attention grabbing DENALI SoundBomb Compact Dual-Tone Air Horn Kit. As the name implies the SoundBomb emits a loud blast that is nearly impossible to ignore by even the most distracted motorists and with 120 decibels of sound output measured at 3 feet the SoundBomb is 4 times louder than a standard motorcycle horn. Designed specifically for motorcycles this horn...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. The D20 also features a rigid core construction that allows the bags to retain their shape even when empty and makes packing and unpacking super easy.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA VarioTouringScreen windscreens are available in clear smoke gray and gloss black. 12" (304mm) tall x 16" (406mm) middle width x 14" (355mm) top width.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The MRA SpeedScreen windscreens are available in clear smoke gray and gloss black. 12.2" (309mm) tall x 15.75" (398mm) middle width x 13" (330mm) top width.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
DrySpec D38 Rigid Waterproof Motorcycle Dry Bag
The D38 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. The D38 features a rigid core that enables the bag to be mounted to any bike with or without a top rack even when the bag is completely empty. Try that with a traditional dry bag! The rigid construction and unique 4-point strap m...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Barkbusters STORM Single Point Bar End Mount Handguard Kit for 7/8in or 1in Hollow Handlebars - STM-005 provide wind weather and debris protection for your hands. A tough aluminum backbone bolts to each side of the bar to securely support aerodynamic plastics that create a “protective pocket” for each hand. The plastic deflectors and rigid backbones transform your exposed handlebar into a friendlier cockpit that ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Impress all your friends with the classic design of this stylish 100% cotton heavyweight T-Shirt. Includes Twisted Throttle logo. You too can be trendy and twisted.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
Replace the bars for your motorcycle's Barkbusters EGO Handguards. EGO lever protection by Barkbusters provide a close fit in order to enable tighter trail riding. EGO Handguards are ideal for Enduro, Trail and mini bikes but are not suitable for motorbikes with full length levers due to the narrow clearances provided by the smaller profile.
Includes two 1/2" (12.7mm) tall M5 spacers and two M5x30mm lenshead screws. Used to level out the tank bag on certain Quick-Lock tank bags when used on particular bikes.
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch.
This R&G Reservoir Sock for Clutch & Brake Fluid | Black will act as a sponge if your brake or clutch fluid should overheat and overflow the reservoir keeping this ultra slippery & corrosive fluid off of your tires and away from painted surfaces. It simply fits straight over your clutch or brake reservoir keeping them and you well protected. Made from black elasticated terry cloth fabric with a white sewn R&G ...
Includes 1 pair of interchangeable replacement lid panels for the Givi V35 PLX sidecase. Same as original matte black color panel from V35N; does not include complete replacement lid.
Note: The Givi E68 Backrest for E36 or E45 luggage cases has been discontinued and is no longer able to be ordered.High-density black rubber backrest for the Givi E45 & E36 luggage case. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue. Mounts using included studs and nuts. Requires minor drilling of the topcase using the supplied pa...
The GIVI MM Monolock Plate features a flat design and is made from aluminum with a black finish. This plate works with all Monolock top cases and only GIVI F series top racks.
R&G Micro Indicator turn signals (pair). Includes 10 watt incandescent bulbs; replaces original 10 watt or 21 watt incandescent turn signals. Designed to fit the R&G line of "Tidy Tail" fender eliminators.
R&G exhaust protector (fits round 5.5" - 6.5" diameter ) for the Triumph Tiger 800 / Tiger 800XC. Will fit any round exhaust can in this diameter range.
The GIVI 240A windscreen for naked motorcycles is a stylish well-constructed windshield which improves aerodynamics comfort and protection. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles with round headlamps. Features light smoke tint that helps to reduce glare on the gauges in direct sunlight. Enhance every mile with the 240A windscreen from GIVI!
This GIVI 3-Case Lock Set with 6 Matched Keys includes three lock cylinders to match the keys for three GIVI cases - for example two side cases and a top case.
After replacing your bike's original 21 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required.
Add 180 grams of mass to the end of each of your handlebars to reduce vibration. Barkbuster Bar End Weights are compatible with full-wrap Storm and VPS hand guards. They will not mount to the motorcycle by themselves they work in conjunction with Barkbuster full wrap hand guards.
Bright red brakelight kit (red diodes) for the Givi V46 and V46NT topcases. Significantly increase safety and visibility by raising and brightening your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks.
Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer.
The RAM "Magnetic Power Plate III" is designed to hold various devices including radar detectors and cellphones. The magnetic plate includes two powerful rare earth magnets rubber cradle and two adhesive metal plates. To mount your device to the magnet you will need to attach one of the metal plates to the back of your device. Includes a rectangular 50mm x 38mm x 0.08mm thick metal plate with adhesive back. This kit...
R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans. These oval covers have been designed to look good and protect your expensive end can in most crash situations.
The SHOCK1BK R&G Shocktube rear shock protector safeguards the vulnerable spring and damper from water sand dirt and debris that can cause stone damage grime build up and corrosion. High quality bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon on both sides to completely block out the elements. This handy Shocktube should be the first addition to any new motorcycle to p...
GIVI's Universal E-series adapter plate is designed to add a GIVI Monokey topcase to most existing flat rear luggage racks. The honeycomb matrix permits multiple options for matching the hardware through-bolts to gaps in your bike's stock luggage rack.
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
For use with Pro Taper SE (seven-eighths) alloy handlebars and other aluminum handlebars with a smaller internal diameter than standard steel handlebars.
