This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW Ducati and other European motorcycles with a Can-BUS electrical system and a "City Light" 194 marker bulb in the headlight. Please Note: Only compatible with bikes that use a 194 marker bulb and have a "universal" bulb connector; will not fit bikes wi...
R&G exhaust protector (fits round 5.5" - 6.5" diameter ) for the Triumph Tiger 800 / Tiger 800XC. Will fit any round exhaust can in this diameter range.
After replacing your bike's original 21 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required.
This R&G Reservoir Sock for Clutch & Brake Fluid | Black will act as a sponge if your brake or clutch fluid should overheat and overflow the reservoir keeping this ultra slippery & corrosive fluid off of your tires and away from painted surfaces. It simply fits straight over your clutch or brake reservoir keeping them and you well protected. Made from black elasticated terry cloth fabric with a white sewn R&G ...
The SHOCK1BK R&G Shocktube rear shock protector safeguards the vulnerable spring and damper from water sand dirt and debris that can cause stone damage grime build up and corrosion. High quality bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon on both sides to completely block out the elements. This handy Shocktube should be the first addition to any new motorcycle to p...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans including Akropovic oval exhausts.
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this exhaust protector or "Exhaust Slider" to fit most tri-oval exhaust cans. These tri oval covers have been designed to look good and protect your expensive silencer in most crash situations.
Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer.
R&G Micro Indicator turn signals (pair). Includes 10 watt incandescent bulbs; replaces original 10 watt or 21 watt incandescent turn signals. Designed to fit the R&G line of "Tidy Tail" fender eliminators.
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans. These oval covers have been designed to look good and protect your expensive end can in most crash situations.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Developed with the feedback of racers and road riders alike R&G's latest generation of Aero Knee Sliders are constructed from a special blend of composite materials to ensure the riders get the best overall performance available. The high-density polyurethane material provides the ideal "sliding action" needed for aggressive street riders and trackday enthusiasts alike. The Aero Knee Sliders attach to your leathers w...
Five pin relay for many automotive applications. Rated for 30-amps of 12-volt DC current. Offered as a replacement part for the Denali SoundBomb Compact Dual-Tone Air Horn.
This DrySpec Motorcycle Tool Tube Kit attaches directly to the outside of any flat-sided sidecases and can be used to carry our MSR 30 oz. Fuel Bottle and any other gear that can fit inside of it.
Made from heavy-duty 3mm thick 1-inch (26mm) wide strips of steel. Inner hole diameter is 5/16-inch (8mm). Center-to-center hole distance is 3 inches overall length of bracket is 4 inches. Powder-coated flat black. Sold each.
The DrySpec STASH BOX is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e. low cost concealed mounting location vehicle styling is unaffected and easy accessibility.
This sticker is retro in more ways than one. Besides being RETRO-reflective it is also reminiscent of the cold war era and it's nuclear symbol. Made of vinyl this sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. We have even spotted a few of these as "protectors" for a certain round german motor...
Your exhaust can is likely to be scraped if you drop or crash you bike. You can greatly reduce the damage to the exhaust when an R&G exhaust protector is correctly placed on the exhaust.
After replacing your bike's original 10 watt incandescent turn signals with R&G Micro Indicators incandescent turn signals (RG.RG370) OR after replacing your bike's original 10 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required....
The sew on patch worn by racers sponsored by R&G Racing is now available! Show R&G Racing support on leathers paddock jackets sweatshirts or anywhere you would like.
Made from high quality FE360 tubular steel and powder coated black the R&G Single Sided Paddoc Stand is a must have for single-sided swingarms. Rear-wheel removal and general maintenance become a breeze! The open-sided design provides proper support without the use of a centerstand or jackstands.
Made from high quality FE360 tubular steel and powder coated black the R&G Single Sided Paddock Stand is a must have for single-sided swingarms. Rear-wheel removal and general maintenance becomes a breeze! The open-sided design allows removal of the rear wheel without a center stand.
The R&G paddock stand for the front lifts the forks get the tire off of the ground to complete tire changes maintenance or to prevent flat tire spots during storage. Sturdy FE360 tubular steel construction is finished in an attractive black powder coat that also enhances durability. This premium stand uses a unique fastening system which allows disassembly to conserve space when traveling or not in use. Four large wh...
The R&G paddock stand for the rear lifts the swing arm with the use of 6mm or 8mm cotton reels or spools to get the tire off of the ground while performing maintenance or during storage. High strength FE360 tubular steel serv...
The R&G Racing Deluxe Helmet Bag is perfect for transporting or storing your helmet when it is not on your head! Constructed from a heavy-duty nylon outer fabric and lined with fleece to keep your expensive helmet cozy and protected from damage.
R&G Universal License Plate Adapter. Used to help fit some Tidy Tails originally designed for European marker plates with American & Canadian license plates.
Made in America! The PowerHub2 Power Distribution Module manufactured by DENALI allows you to safely connect up to 6 electronic devices to your motorcycle in a clean professional manner. It is CAN-Bus compatible and includes six 15-amp rated and fused outputs six ground posts and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as...
Easy and inexpensive Plug-N-Play wiring kit for DENALI SoundBomb Compact Dual-Tone Air Horn (also works with the Stebel Air Horn) that does not require any cutting soldering slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire one lead to battery ground one lead to battery positive and plug in your horn's relay.
I...
Package contains four 2amp four 3amp two 5amp two 7.5amp two 10amp and one 15 amp fuses for use in the PowerHub2 Power Distribution Module by Denali. Fuses will work in other products that use mini ATM fuses.
This isn't your typical motorcycle cover. The R&G Racing dust cover is ideal for keeping your pride and joy spotlessly clean over the winter or when put back indoors after cleaning.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The D66 includes one D28 and one D38 dry bag to create 66 liters of 100% waterproof storage. Modular packing has significant advantages over a single bag of the same volume. The two-bag D66 system makes packing and organizing your gear easier allows for quicker access to your gear and enables strategic separation of your gear; keeping your clean clothes separate...
Should you drop or crash your bike your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. The D20 also features a rigid core construction that allows the bags to retain their shape even when empty and makes packing and unpacking super easy.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
D28 Dual-End Dry Bag The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips but is the ideal add on bag for a D38 or...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
DrySpec D38 Rigid Waterproof Motorcycle Dry Bag
The D38 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. The D38 features a rigid core that enables the bag to be mounted to any bike with or without a top rack even when the bag is completely empty. Try that with a traditional dry bag! The rigid construction and unique 4-point strap m...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D106 Modular Packing System consists of the D38 DrySpec Rigid drybag the D28 Dual-End drybag and the D20 saddlebag set. The D38 D28 and D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged.
LOUD! Stylish! Rugged!
Producing an earsplitting 120 decibels of sound the SoundBomb is 4 times louder than a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing the SoundBomb will practically disappear once installed.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D56 Modular Packing System consists of two D28 DrySpec dual-opening drybags. The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips but is...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D78 Modular Packing System consists of the D38 DrySpec Rigid drybag and the D20 saddlebag set. The D38 and D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged.
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
The slip-lock straps were developed by DrySpec to create the strongest lowest profile mounting solution. The tri-glides on the ends of each strap are designed to slip through and lock into the one inch hardware loop on the bag. This strap set is included with the DrySpec D38 and D20. Includes two loop-end slip-lock straps and one double-end slip-lock strap (for the rear mounting point).
Constructed from black anodized billet aluminum for strength and durability the kit allows fitment of any Denali LED Lighting Kit to Ural Motorcycles. All mounting hardware and instructions are included.
Works with similar auxiliary lighting such as the PIAA Line and Hawk lights from SW-MOTECH...
The Shocktube is a high impact waterproof vented tube made from top quality bonded 100% CR Neoprene which is double lined with stretch nylon on both sides.
The Shocktube is a high impact waterproof vented tube made from top quality bonded 100% CR Neoprene which is double lined with stretch nylon on both sides.
The Shocktube is a high impact waterproof vented tube made from top quality bonded 100% CR Neoprene which is double lined with stretch nylon on both sides.
The Shocktube is a high impact waterproof vented tube made from top quality bonded 100% CR Neoprene which is double lined with stretch nylon on both sides.
Made from lightweight aluminium for high strength and durability.Powdercoated in black with crisp white R&G graphics on the peg.Compatible with any/all R&G RearsetsSold individually.
You've got your bike protected, now what about your ears!These DIY moulded ear plugs offer a low cost, re-usable custom moulded earplug in a do it yourself kit.
Use these compact LED strips as accent lighting or to increase nighttime visibility. Each 70mm adhesive-backed LED strip contains 15 LEDs and draws only 0.11 Amps.
The mounting kit includes the proper size drill bit hex head screws sealing washers and large exterior washers as detailed in the Installation Instructions attached below. If you would like to attach the Tool Tube using an alternate method please order the optional Mounting Brackets.
Developed in cooperation with and used by adventure riders and racing teams alike this R&G universal racing foot peg for R&G rearsets is designed to help you reach your full potential on the track. Each unit is uniquely textured to give the rider greater traction and feel on the peg during wicked maneuvers aggressive cornering and quick direction changes.
The DrySpec exhaust heat shield prevents soft luggage and luggage straps from coming in contact with your exhaust. It fits exhausts pipes ranging in size from 4 to 6 inches in diameter and can accommodate non cylindrical exhaust shapes. The heat shield mounts to the exhaust with a stainless steel hose clamp and includes an adhesive ba...
Required for racing and developed for Moto2 the Lever Guard was originally brought to life in order to help avoid the accidental engagement of the front brake lever during close racing; whether from contact with another bike or rider. The protective gear is equally useful for a road rider to prevent lever(s) from sustaining wing mirror strikes which could also engage brake mechanisms.
Installation takes only s
...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Crafted from ultra lightweight aluminum and powder coated for long lasting use this R&G Adjustable Bottle Cage for Motorcycles is the ideal accessory for the rider on-the-go. The cup holder allows the user to have access to a drink canister attached to the motorcycle handlebars crash bars or accessory rails. With an adjustable fastener the R&G bottle cage can be c...
The DENALI SoundBomb split dual-tone air horn produces an earsplitting 120 decibels of sound (four times louder than your typical motorcycle horn!) in a compact two piece design for motorcycles that have a limited amount of space. Ear splitting performance demands attention to make your presence known and keep you safe from traffic that might have failed to notice. A 3 foot length of air line is included to allow t...
This DENALI Bar Clamp Light Mount Kit allows fitment of any DENALI LED Lights to the outer fork tube on motorcycles, or any tube 50mm-60mm (2"-2.375") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.
These clamps are intended for motorcycles with exposed inverted forks such as enduro, dual sport, and naked motorcycles. The clamps allow lights to be mounted in front of, or to each side of the fork tubes to ensure clearance with fairings and other accessories. The clamps are also perfectly sized to clamp to the lower legs of conventional forks, typically found on many cruiser and standard motorcycles.
Features
Adjustable Grip Range (50mm-60mm)
60mm Light Shelf length
Rotatable Mounting Shelf allows 4th axis of adjustability
Lights can be mounted to shelf or directly to clamp
Accepts M8 Bolt from Light Pod
Billet Aluminum with Black Anodized Finish
What's In the Box?
(x2) Mounting clamps
(x2) Rotatable mounting shelf’s
(x1) Hardware kit
Instruction Manual
This DENALI Fork Tube Light Mount Kit allows fitment of any DENALI LED Light Kit to conventional forks or any tube 39mm - 49mm (1.5-1.8in) in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional fully rotatable mounting shelf to create
...
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
