R&G Rear Axle Sliders / Protectors for MV Agusta Brutale 675 Brutale 750 Brutale 800 Brutale 910 Brutale 910R SE Dragster 800 F3 675 F3 800 F4 F4 RC F4 750 Rivale 800 Stradale 800 and Turismo Veloce 800. This is an axle through-bolt design that pulls double duty as an axle and swing arm protector and a spool stand to pick up the rear end for routine adjustments storage and cleaning.
R&G Front Axle Sliders / Protectors for MV Agusta Brutale 910 SE F4 1000R F4 1098 312R & F4 1098 312RR. These fork protectors were designed to help eliminate damage to the front axle during a drop a skidding stop or a "Low Side".
The SHOCK2BK R&G Shocktube shock protector preserves the susceptible spring and damper from contaminants that can cause damage debris build up and corrosion. Premium bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon to successfully defend against the elements. This essential Shocktube should be the first addition to any new motorcycle to preserve the rear shock and the per...
Lose your mirrors for that rebellious look or simply to stop your fairings flapping during track days or racing! Made from aluminum these neat little blanking plates fit over the mounting point for the mirrors and can be fitted in seconds. Black sold in pairs.
A drop can be either a great story or an expensive experience that could leave you stranded. Keep the odds in favor of great stories with the protection and good looks of the R&G Aero Style Frame Sliders.
Picking that perfect spot to park your motorcycle is not always possible. Help to keep your side stand from sinking and toppling your ride with the R&G Racing Side stand Foot Enlarger without needing to carry a side stand puck ever again!
$53.99Original price was: $53.99.$45.89Current price is: $45.89. USD
Free Delivery on orders over $50
Non-stock Item
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G fender extender for MV Agusta F4 attaches to the front fender to improve coverage and protection that will keep the bike cleaner and deflect damaging debris. Molded ABS plastic mounts to the rear of the factory unit to prevent dirt debris stones and other junk from getting thrown up. This handy little fender enhances protection to vital components like the oil cooler and radiator while also keeping the motor...
By getting a set of the crafty R&G under body frame sliders you’ll get the protection you want without having to cut the fairing on your motorcycle. These frame sliders fit under your fairing and provide protection for the vulnerable and expensive to repair core components of your Superbike the frame and engine. Crafted from lightweight and robust polypropylene this setup offers reliable protection during a drop ...
The R&G aero style “no cut” frame sliders feature a uniquely designed stainless steel bracket with blocks that eliminate the need to modify your fairing. These sliders will save you from having to invest in expensive repairs in the event of a bike drop or accident. Boasting a aerodynamic and tear shaped bobbin these frame sliders look great and will protect your frame fairing motor and radiator fr...
Manufactured using high density polyethylene and installs without having to drill holes in your fairing the R&G aero style "no cut" frame sliders are perfect for your MV Agusta F4RC. Designed with a distinctive “teardrop” shape these sliders have more of streamlined look than your average round ones. A uniquely designed bracket moves the location of the frame slider away from the mounting point to...
Preserve the expensive frontal components on the Agusta F4RC with the R&G fork protectors. These sliders are manufactured using abrasion resistant high density Polyethylene prevent the front forks fork bottoms and brake calipers from coming in contact with the ground in the event of a drop or crash. This material has impact resistant properties that will combat forces that could damage those vital components wh...
Get rid of your large and obvious tag holder and replace it with the sleeker R&G tail tidy. This license place holder tucks your number plate under the rear seat and cleans up the rear of your iconic MV Agusta F4 F4RC and F4RR motorcycle. Manufactured using stainless steel and finished with a black powder coat ensures durability of the holder. This tail tidy comes with a LED license plate light and plug-and-pl...
$126.99Original price was: $126.99.$107.94Current price is: $107.94. USD
Free Delivery
Non-stock Item
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G radiator guard is manufactured out of a lightweight aluminum mesh that will prevent stones tossed up by the front tire from causing punctures and bugs from clogging up cooling fins. Not only will this guard protect your vulnerable and expensive to repair rad the design will not interfere with the cooling efficiency of your motorcycle. Along with the radiator guard you will receive some self adhesive foam pads...
$71.99Original price was: $71.99.$61.19Current price is: $61.19. USD
Free Delivery
Non-stock Item
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Adding the R&G lever guard results in the motorcycles clutch and brake levers and your knuckles being protected in a race track and road riding scenarios. The last thing you want when enjoying a motorcycle ride is to end up doing an unplanned endo thanks to elbows or wing mirrors hitting your brake lever. R&G injection molds lightweight DuPont® Zytel® Nylon to manufacture their lever guards. Th...
Discover how the R&G boot guard kit can protect your motorcycle from wear and tear while also helping keep your boots planted securely on the pegs. These low profile pads are fabricated out of synthetic rubber and will not scuff up expensive foot gear. The paint friendly yet super strong adhesive backing provides a secure bond and makes installation super easy. In this kit there are three pieces that will give you ma...
The R&G Racing Titanium Radiator Guard is designed to be the strongest possible protection against stones and road debris for your radiator. High quality (ASTM B265 Grade 1 Titanium mesh is surrounded by a seamless aluminum frame and anodized for long lasting good looks. This radiator guard has twice the strength of its aluminum counterpart to protect your expensive radiator from stones and road debris that cou...
Clean up the unfinished appearance left behind when removing the passenger peg mounts with the R&G rear foot rest blanking plates for MV Agusta F4 RC. High quality aluminum is precisely CNC machined for a perfect fit and is hard anodized silver to enhance durability and corrosion resistance. These attractive blanking plates mount directly to the sub-frame in place of the OEM passenger peg mounts and cover up exposed b...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G Aero style frame sliders for MV Agusta F4 F4R & F4RR provide protection to the most critical components in the event of a fall or spill. High Density Polyethylene (HDPE) bobbins are aerodynamically shaped and mounted to the frame with a specially designed bracket that eliminates fairing modifications. HDPE is naturally impact absorbing and abrasion resistant to keep the frame engine and plas...
The R&G Aero style frame sliders for MV Agusta F4 | white significantly reduce the risk of damage to critical components in the event of a fall or slide. High Density Polyethylene pucks are naturally impact and abrasion resistant and designed to contact the ground instead of your motorcycle. These essential frame sliders are bolted directly to the frame with de-embrittled hardware which bends at the point...
The R&G Tail Tidy fender eliminator for MV Agusta F4 RC enhances the aesthetics of the rear end by replacing the enormous factory mud guard/license plate holder with a low-profile unit. Stout stainless steel construction is used for improved durability and corrosion resistance. This attractive tail tidy re-positions the license plate and turn signal indicators directly below the tail light so they flow with the...
$83.99Original price was: $83.99.$71.39Current price is: $71.39. USD
Free Delivery
Non-stock Item
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
R&G tie down hooks for MV Agusta F4 models provide a secure strapping point on the tail of the motorcycle after removal of the passenger foot pegs. High quality aluminum construction is lightweight yet strong and finished in a hard anodized black or gold color for improved aesthetics durability and corrosion resistance. These handy hooks are great for securing the tail during transport with the use of ratchet straps ...
The R&G paddock stand for the rear lifts the swing arm with the use of 6mm or 8mm cotton reels or spools to get the tire off of the ground while performing maintenance or during storage. High strength FE360 tubular steel serv...
This isn't your typical motorcycle cover. The R&G Racing dust cover is ideal for keeping your pride and joy spotlessly clean over the winter or when put back indoors after cleaning.
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
Required for racing and developed for Moto2 the Lever Guard was originally brought to life in order to help avoid the accidental engagement of the front brake lever during close racing; whether from contact with another bike or rider. The protective gear is equally useful for a road rider to prevent lever(s) from sustaining wing mirror strikes which could also engage brake mechanisms.
Installation takes only s
...
$71.99Original price was: $71.99.$61.19Current price is: $61.19. USD
Free Delivery
In stock
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G lever guard universal fit 13-21 mm ID mounts to the end of a hollow handlebar or clip on to provide protection from accidental brake or clutch lever activation. Sturdy Zytel Nylon construction safeguards against elbow impacts in tight racing scenarios that could cause a loss of drive (clutch) or even worse a violent front flip (front brake). This critical lever guard can also be used on street bikes to preven...
$17.59Original price was: $17.59.$14.95Current price is: $14.95. USD
Free Delivery on orders over $50
Out of stock
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This R&G motorcycle rim tape is a 16 piece modular system designed for adding a touch of bad ass and visibility to your bike. Available in many colors to suit your aesthetic the wheel stripes are easy to install in whatever configuration works for you. The tire rim tape is designed to fit 17" motorcycle wheels with precision. No special tools or techniques required for installation just place and go!
Easy and inexpensive Plug-N-Play wiring kit for DENALI SoundBomb Compact Dual-Tone Air Horn (also works with the Stebel Air Horn) that does not require any cutting soldering slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire one lead to battery ground one lead to battery positive and plug in your horn's relay.
I...
This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW Ducati and other European motorcycles with a Can-BUS electrical system and a "City Light" 194 marker bulb in the headlight. Please Note: Only compatible with bikes that use a 194 marker bulb and have a "universal" bulb connector; will not fit bikes wi...
The SHOCK1BK R&G Shocktube rear shock protector safeguards the vulnerable spring and damper from water sand dirt and debris that can cause stone damage grime build up and corrosion. High quality bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon on both sides to completely block out the elements. This handy Shocktube should be the first addition to any new motorcycle to p...
R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans. These oval covers have been designed to look good and protect your expensive end can in most crash situations.
Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans including Akropovic oval exhausts.
R&G exhaust protector (fits round 5.5" - 6.5" diameter ) for the Triumph Tiger 800 / Tiger 800XC. Will fit any round exhaust can in this diameter range.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this exhaust protector or "Exhaust Slider" to fit most tri-oval exhaust cans. These tri oval covers have been designed to look good and protect your expensive silencer in most crash situations.
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
R&G Micro Indicator turn signals (pair). Includes 10 watt incandescent bulbs; replaces original 10 watt or 21 watt incandescent turn signals. Designed to fit the R&G line of "Tidy Tail" fender eliminators.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Developed with the feedback of racers and road riders alike R&G's latest generation of Aero Knee Sliders are constructed from a special blend of composite materials to ensure the riders get the best overall performance available. The high-density polyurethane material provides the ideal "sliding action" needed for aggressive street riders and trackday enthusiasts alike. The Aero Knee Sliders attach to your leathers w...
This R&G Reservoir Sock for Clutch & Brake Fluid | Black will act as a sponge if your brake or clutch fluid should overheat and overflow the reservoir keeping this ultra slippery & corrosive fluid off of your tires and away from painted surfaces. It simply fits straight over your clutch or brake reservoir keeping them and you well protected. Made from black elasticated terry cloth fabric with a white sewn R&G ...
After replacing your bike's original 21 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required.
Five pin relay for many automotive applications. Rated for 30-amps of 12-volt DC current. Offered as a replacement part for the Denali SoundBomb Compact Dual-Tone Air Horn.
This DrySpec Motorcycle Tool Tube Kit attaches directly to the outside of any flat-sided sidecases and can be used to carry our MSR 30 oz. Fuel Bottle and any other gear that can fit inside of it.
Made from heavy-duty 3mm thick 1-inch (26mm) wide strips of steel. Inner hole diameter is 5/16-inch (8mm). Center-to-center hole distance is 3 inches overall length of bracket is 4 inches. Powder-coated flat black. Sold each.
The DrySpec STASH BOX is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e. low cost concealed mounting location vehicle styling is unaffected and easy accessibility.
This sticker is retro in more ways than one. Besides being RETRO-reflective it is also reminiscent of the cold war era and it's nuclear symbol. Made of vinyl this sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. We have even spotted a few of these as "protectors" for a certain round german motor...
Your exhaust can is likely to be scraped if you drop or crash you bike. You can greatly reduce the damage to the exhaust when an R&G exhaust protector is correctly placed on the exhaust.
After replacing your bike's original 10 watt incandescent turn signals with R&G Micro Indicators incandescent turn signals (RG.RG370) OR after replacing your bike's original 10 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required....
The sew on patch worn by racers sponsored by R&G Racing is now available! Show R&G Racing support on leathers paddock jackets sweatshirts or anywhere you would like.
Made from high quality FE360 tubular steel and powder coated black the R&G Single Sided Paddoc Stand is a must have for single-sided swingarms. Rear-wheel removal and general maintenance become a breeze! The open-sided design provides proper support without the use of a centerstand or jackstands.
Made from high quality FE360 tubular steel and powder coated black the R&G Single Sided Paddock Stand is a must have for single-sided swingarms. Rear-wheel removal and general maintenance becomes a breeze! The open-sided design allows removal of the rear wheel without a center stand.
The R&G paddock stand for the front lifts the forks get the tire off of the ground to complete tire changes maintenance or to prevent flat tire spots during storage. Sturdy FE360 tubular steel construction is finished in an attractive black powder coat that also enhances durability. This premium stand uses a unique fastening system which allows disassembly to conserve space when traveling or not in use. Four large wh...
The R&G Racing Deluxe Helmet Bag is perfect for transporting or storing your helmet when it is not on your head! Constructed from a heavy-duty nylon outer fabric and lined with fleece to keep your expensive helmet cozy and protected from damage.
R&G Universal License Plate Adapter. Used to help fit some Tidy Tails originally designed for European marker plates with American & Canadian license plates.
Made in America! The PowerHub2 Power Distribution Module manufactured by DENALI allows you to safely connect up to 6 electronic devices to your motorcycle in a clean professional manner. It is CAN-Bus compatible and includes six 15-amp rated and fused outputs six ground posts and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as...
Package contains four 2amp four 3amp two 5amp two 7.5amp two 10amp and one 15 amp fuses for use in the PowerHub2 Power Distribution Module by Denali. Fuses will work in other products that use mini ATM fuses.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
