R&G "Cotton Reel" swingarm spools is used to help raise the rear tire off of the ground with a rear stand to do routine maintenance operations. Things such as lubing the chain cleaning the rear wheel and swingarm changing tires and brake pads.
The SHOCK2BK R&G Shocktube shock protector preserves the susceptible spring and damper from contaminants that can cause damage debris build up and corrosion. Premium bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon to successfully defend against the elements. This essential Shocktube should be the first addition to any new motorcycle to preserve the rear shock and the per...
Designed to clean up the look of your bike and prevent dust and debris from collecting in the frame voids. Sold as a singles (2 required per bike). Each can be used for either the left hand side or right hand side.
Designed to clean up the look of your bike and prevent dust and debris from collecting in the frame voids. Sold as a singles (2 required per bike). Each can be used for either the left hand side or right hand side.
R&G Radiator Cooler Guards are available in a black finish. They are made from pressed aluminum and feature a neat seamless frame. They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris. No permanent modifications need to be made to the bike. Also available for this bike is an optional Header Pipe Guard (RG.DG0012BK) that can be fitted below this radia...
The R&G front axle sliders fork protectors for Kawasaki Ninja 300 protect critical front end components from damage in the event of a tip over slide or crash. The impact absorbing and abrasion resistant high density polyethylene bobbins act as armor to prevent vulnerable parts from getting ground down into the pavement. These essential front axle sliders bolt through the front wheel for even greater support. I...
Secure your fairing after mirror removal with the R&G mirror blanking plates. Enjoy enhanced aesthetics with precision machined HDPE (High Density Polyethylene) that integrates perfectly with the original bodywork. These handy blanking plates bolt to the mirror mounts without the need for drilling or any other modifications. Highly recommended for use on the track to improve overall aerodynamics while also remo...
This R&G Engine Case Cover is made from vacuum-formed thermoplastic and designed to fit the left hand side (LHS) crank case cover. Crafted from 4mm polypropylene for maximum ground clearance durability and good looks they compliment the R&G Crash Protectors perfectly. Lighter than the heavy protectors of the past R&G Racing Engine Case Covers not only save w...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Same shape as the original manufacturer's windshield. Lower part of screen printed black to hide rear of instrument cluster. Available in clear smoke gray and gloss black.Overall length: 15.7 inches (400 mm).
Picking that perfect spot to park your motorcycle is not always possible. Help to keep your sidestand from sinking and toppling your ride with the R&G Sidestand Foot Enlarger.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Get the TechSpec Gripster Tank Grips for your Kawasaki Ninja 300 and you'll experience solid tank grip without any gear snagging. Maintain proper body position during acceleration cornering and hard braking with reliable anchor points that keep you securely fastened to the motorcycle. Low-profile synthetic rubber grips are precision cut to maximize the contact area while integrating perfectly with the overa...
Shield your rig from unsightly scuffs and scrapes with this R&G Boot Guard Kit. Everyday wear and tear during shifting and braking will be eliminated preserving your frame in its original condition without destroying your gear. A quality adhesive formula ensures these boot guards stay put and protection is never compromised.
This R&G Tank Traction Grip kit is designed for the Kawasaki Ninja 300. Each adhesive pad features a unique texture specially designed for long term durability and comfort. The Traction Grips allow the rider to maintain better bike control while also providing support to achieve the ideal body position when braking and cornering. The grip kit also helps prevent fatigue enabling focus on the road (or track) ins...
This R&G Tank Traction Grip kit is designed for the Kawasaki Ninja 300. Each clear adhesive pad features a unique texture specially designed for long term durability and comfort. The Traction Grips allow the rider to maintain improved bike control while also providing support to achieve the ideal posture when braking and cornering. The grip kit also helps prevent fatigue enabling focus on the road (or track) i...
The R&G Shocktube protects the pair of rear shock absorbers by completely enclosing them in top quality bonded 100% CR Neoprene. Double lined in stretch nylon to prevent damage from road salts stone chips dust and dirt that is kicked up by the rear tire. These Shocktubes will keep your rear suspension looking new and free from outside contaminants therefore extending service life.
With the Givi CV47G730 replacement lid panel there is no need to purchase an entire new case if your new motorcycle is silver. This cover will blend in with the look of your motorbike nicely. The glossy silver finish is stylish and trendy.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The R&G fender extender for Kawasaki Ninja 300 attaches to the original front fender and enhances coverage behind the front tire. Durable ABS plastic is lightweight and easy to install with included adhesive tape and pop rivets. This convenient fender extender protects the vulnerable radiator and exhaust headers from sand stones and other debris launched by the tacky front tire. Water spray in is also signific...
The R&G radiator guard safeguards the vulnerable and expensive to repair cooling system from debris flung by the front tire and other vehicles ahead of you. Bugs stones twigs and other road rubbish glance off the lightweight aluminum mesh screen preserving the fragile cooling fins without restricting airflow. This indispensable radiator guard is an excellent investment for any street bike with sticky tires....
R&G cotton reel swingarm spools provide impact / abrasion protection for the rear-end of your Kawasaki while also serving as a lifting point for general maintenance. HDPE (High Density Polyethylene) construction is the same effective material used in their frame sliders which is now available to defend the rear swingarm rear axle rear sprocket rear brake rotor and caliper from contact with the ground. Also designed...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Constructed of heavy-duty machined steel aluminum and high-density nylon R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks.The protector itself is machined from High Density Polyethylene (HDPE) – chosen because as it wears it actually helps to slow...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This R&G Exhaust Header Pipe Grill is manufactured out of aluminum and is constructed to fit your motorcycle perfectly. By installing this grill you are protecting those vulnerable (and expensive to repair) exhaust headers and integral components below the radiator from damage causing flying debris. This downpipe grille is available in a black green or titanium powder coated finish that further enhances the durabilit...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
These MFW bike-specific mounts allow you to install MFW adjustable footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in black or silver.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
These MFW bike-specific mounts allow you to install MFW adjustable passenger footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in black or silver.
The patented Type 116 PRO Tank Ring is made to suit the tank filler neck of your BMW, Kawasaki or Yamaha motorcycle model. This ensures the best possible positioning onto the tank.
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.Supplied as a pair
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.It has a higher than average 20mu aluminium foil face making it extremely durable and resilient even after repeated manipulationduring fabrication. The adhesive used to laminate the aluminium foil to the glass cloth is a special high temperature silicone adhesive, greatly reducing the chances of the foil cracking or delaminating from the glass cloth. In addition, the base glass cloth fabric is impregnated with a black flame resistant pu coating to prevent fraying during CNC machine slitting and fabrication, ensuring a clean cut and professional finish.The R&G Heat Shield offers a flexible, easy to apply material to help reflect heat away from electrical components and can also be used on the inside of fairings, body panels etc. to protect paint finishes from extreme heat, the bottom of fuel tanks, inside of sumps, bottom of air boxes and to prevent heat transfer to swing arms on close fitting exhausts.Available in cut sheets or slit rolls on request.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
R&G Knee Sliders have been put to the test extensively around the world, from the British Superbike Championship to top race schools, our Knee Sliders are trusted by many riders on many tracks and Roads. R&G Factory GP Knee Sliders are designed with the track enthusiast in mind. Developed in partnership with some of the best British Superbike riders, our Factory GP Knee Sliders feature a new, harder-wearing compound for increased durability and a wide rear profile, to offer amaximum range of positioning on leathers. Double-sided Patch Adapters, with genuine VELCRO® brand fasteners,available separately, allowing R&G Knee Sliders to fit with all types of leathers.VELCRO® is a registered trademark of Velcro Industries B. V.
Double Sided Velcro Patch Adapter for R&G Kneesliders (Kneesliders sold separately) Our Aero Knee Sliders are extensively used all over the world, seen on the best riders, best roads and best tracks. They are used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.Developed with the feedback of racers and road riders alike. we made our latest generation Aero Knee Sliders, from a special blend of composite materials to ensure the riders gets the best overall performance available.Attaching to your suit via Velcro (Hook) Available in Black, White, Fluoro Yellow or Orange.
These covers are breathable, soft and elasticated. They can also be spun dry.Ideal for keeping your pride and joy spotlessly clean over the winter or when put back into indoor after cleaning!Made from a high quality breathable material that allows the air to constantly travel through. Available in Black with Silver logo and piping or Red with White logo/piping.
Our premium Race Grips are available for many sportsbikes, with new applications released regularly. The R&G Race Grip texture features a unique pattern with a sleek and dynamic profile. Specifically designed to allow greater movement on the bike whilst ensuring high levels of grip when needed, while being kind to leathers. At a glance• Our premium traction grips for race / advanced trackday use• Specifically cut to size for a perfect fit to the bike• Made from high quality polyurethane• Designed not to wear hard on leathers • Enables the rider to maintain a “locked on” body position• Designed to assist in better bike control• Created to help relieve rider fatigue
R&G Radiator Guards are available in black, titanium or green powdercoat finishes to fit the Kawasaki Ninja 250 ('08-'17) Ninja 300 ('12-) & Z250 '13-18'Made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris. No permanent modifications need to be made to the bike.Available in Black only.
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.It has a higher than average 20mu aluminium foil face making it extremely durable and resilient even after repeated manipulationduring fabrication. The adhesive used to laminate the aluminium foil to the glass cloth is a special high temperature silicone adhesive, greatly reducing the chances of the foil cracking or delaminating from the glass cloth. In addition, the base glass cloth fabric is impregnated with a black flame resistant pu coating to prevent fraying during CNC machine slitting and fabrication, ensuring a clean cut and professional finish.The R&G Heat Shield offers a flexible, easy to apply material to help reflect heat away from electrical components and can also be used on the inside of fairings, body panels etc. to protect paint finishes from extreme heat, the bottom of fuel tanks, inside of sumps, bottom of air boxes and to prevent heat transfer to swing arms on close fitting exhausts.Available in cut sheets or slit rolls on request.
Using only the highest-quality material available R&G's Rim Tape is designed to give years of service! Available, in a large range of colors and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel with no specialist tools or techniques required.
After replacing your bike's original 21 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required.
This R&G Reservoir Sock for Clutch & Brake Fluid | Black will act as a sponge if your brake or clutch fluid should overheat and overflow the reservoir keeping this ultra slippery & corrosive fluid off of your tires and away from painted surfaces. It simply fits straight over your clutch or brake reservoir keeping them and you well protected. Made from black elasticated terry cloth fabric with a white sewn R&G ...
The smooth style and narrow profile of the E340 topcase features a durable finish making it a great choice for all types of bikes -- whether sport cruiser dual-sport or standard. With a 34 liter luggage capacity this case is an excellent topcase choice as it nicely complements all of the popular GIVI sidecases (E21 E36 and the E360). Note that this topcase features the GIVI Monolock design which means it mus...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The sleek aerodynamic design of the Givi V46 Delux makes it a popular choice for most of today's modern motorcycles. The V46 has a wide perimeter band with an attractive red accent and an easy-to-grip handle. The aerodynamic style deceptively hides a spacious 46 liter carrying capacity. This case is an excellent choice as a topcase especially when complemented with either the E41 or E21 Cruiser sidecases.
The new GIVI Trekker 52 liter top case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening).
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
Your exhaust can is likely to be scraped if you drop or crash you bike. You can greatly reduce the damage to the exhaust when an R&G exhaust protector is correctly placed on the exhaust.
The R&G paddock stand for the front lifts the forks get the tire off of the ground to complete tire changes maintenance or to prevent flat tire spots during storage. Sturdy FE360 tubular steel construction is finished in an attractive black powder coat that also enhances durability. This premium stand uses a unique fastening system which allows disassembly to conserve space when traveling or not in use. Four large wh...
The R&G paddock stand for the rear lifts the swing arm with the use of 6mm or 8mm cotton reels or spools to get the tire off of the ground while performing maintenance or during storage. High strength FE360 tubular steel serv...
The R&G Racing Deluxe Helmet Bag is perfect for transporting or storing your helmet when it is not on your head! Constructed from a heavy-duty nylon outer fabric and lined with fleece to keep your expensive helmet cozy and protected from damage.
The sleek aerodynamic design of the Givi V47NT makes it a popular choice for most of today's modern motorcycles featuring an aluminum center panel and smoke lenses. The aerodynamic style deceptively hides a spacious 47 liter carrying capacity. This case is an excellent choice as a topcase especially when complemented with the V35 sidecases.
The sleek aerodynamic design of the Givi V47N makes it a popular choice for most of today's modern motorcycles featuring an aluminum center panel and red lenses. The aerodynamic style deceptively hides a spacious 47 liter carrying capacity. This case is an excellent choice as a topcase especially when complemented with the V35 sidecases.
R&G Universal License Plate Adapter. Used to help fit some Tidy Tails originally designed for European marker plates with American & Canadian license plates.
This isn't your typical motorcycle cover. The R&G Racing dust cover is ideal for keeping your pride and joy spotlessly clean over the winter or when put back indoors after cleaning.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Get solid tank grip without snagging! TechSpec Gripster General Sheets with the center tank protector allow you to cut to a custom shape for your application. Many pre-cut bike specific shapes are also available. All Techspec options feature a "Releasable Adhesive" allowing you to remove and reuse without leaving icky sticky goo behind.
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The sleek aerodynamic design of the Givi E360 Delux makes it a popular choice for most of today's modern motorcycles. The E360 has a wide perimeter band with an attractive red accent and an easy-to-grip handle. The aerodynamic style deceptively hides a spacious 40 liter carrying capacity. This case is an excellent choice for a topcase.
The Shocktube is a high impact waterproof vented tube made from top quality bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
The sleek aerodynamic design of the Givi V47NN makes it a popular choice for most of today's modern motorcycles featuring a faux carbon fiber inlay and red accent lenses. The aerodynamic style deceptively hides a spacious 47 liter carrying capacity. This case is an excellent choice as a topcase especially when complemented with the V35 sidecases.
The sleek aerodynamic design of the Givi V47NNT makes it a popular choice for most of today's modern motorcycles featuring a faux carbon fiber inlay and smoke lenses. The aerodynamic style deceptively hides a spacious 47 liter carrying capacity. This case is an excellent choice as a topcase especially when complemented with the V35 sidecases.
These padded strips have an adhesive backing and offer protection and grip when strapping dry bags or expansion bags to the top of your side cases. The strips are about 1/8" thick and are made from a foam rubber with a grippy texture bonded to the top. Construction is similar to a typical mouse pad. Package includes 3 strips (enough to cover a single case).
The new GIVI Trekker 52 liter top case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market.
