Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The MRA SpeedScreen windscreens are available in clear smoke gray and gloss black. 12.2" (309mm) tall x 15.75" (398mm) middle width x 13" (330mm) top width.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA VarioScreen windscreens are available in clear smoke gray and gloss black. 19.3" (490mm) tall x 17.3" (439mm) middle width x 14" (355mm) top width.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA VarioTouringScreen windscreens are available in clear smoke gray and gloss black. 12" (304mm) tall x 16" (406mm) middle width x 14" (355mm) top width.
MFW's bike specific Replacement Brackets allow direct replacement of your original passenger footpegs with one of MFW's 3 styles of replacement footpegs. Compatible only with MFW footpegs (sold separately). Sold in pairs. Available in silver.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Reduce rider fatigue due to wind pressure and turbulence with the MRA V-Flow X-Creen Sport Screen (style "VFXZ") windshield. The VFXZ is a taller touring sized windscreen with an X-Creen Sport attached to the top. The bottom edge of the VFXZ is designed for motorcycles with angular or dual headlights.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The MRA Roadshield Classic windscreen is available in clear smoke gray gloss black blue red and yellow. It measures 12.5" (317mm) tall x 16" (406mm) at the widest point.
A drop can be either a great story or an expensive experience that could leave you stranded. Keep the odds in favor of great stories with the protection and good looks of the R&G Racing Classic Style Frame Sliders.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The StreetShield is MRA's smallest screen specially designed to unobtrusively compliment the style of smaller on or off-road naked bikes. It offers good protection for the size. Dimensions: L 14.4" x W 9.3"
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your motorcycle from road debris and dirt with the R&G Fender Extender. Crafted from durable ABS plastic this guard is designed to block stones grit mud and water kicked up by the front wheel adding protection to your cooling system engine case exhaust pipes and fairing panels. Simple to install this kit mates directly to your motorcycle's front fender or mud shield using adhesive strips and push riv...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This MRA Vario Screen Type "A" motorcycle windshield has the same overall shape as the original Vario Screen but with a modified lower edge. Available in clear and smoke gray. 19.3" (490mm) tall x 17.3" (439mm) middle width x 14" (355mm) top width.
This Kaoko Throttle Stabilizer Cruise Control is just what you need on your Kawasaki motorcycle to reap the benefits of having the ability to maintain cruising speed and give your throttle hand a break. The device includes a uniquely designed friction nut that works in conjunction with your original handlebar end. This Slim Line design fits between the throttle and the original bar end weight. If you're looking for...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
SW-MOTECH has raised the bars (literally) with these new (7/8 in) 20mm handlebar risers for your motorcycle with 22mm handlebars increasing comfort by providing you with a more upright riding position. This ergonomic enhancing accessory is available in either powder-coated black or bead blasted aluminum for strength and durability. No need to replace your handlebars. Simply remove the original top clamp place th...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
SW-MOTECH has raised the bars (literally) with these new (2 in) 50 mm handlebar risers for your motorcycle with 22mm handlebars increasing comfort by providing you with a more upright riding position. This ergonomic enhancing accessory is available in either powder-coated black or bead blasted aluminum for strength and durability. No need to replace your handlebars. Simply remove the original top clamp place the...
A Kaoko Throttle Stabilizer cruise control enhances operation of the throttle resulting in reduced fatigue improved comfort on extended rides and greater smoothness on bumpy roads or terrain. The KAW221R&G unit is for select Kawasaki motorcycles which are equipped with R&G bar end sliders. Roll the throttle lock back to hold the grip in place on extended highway trips and give your right hand / arm a break no need t...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
These MFW bike-specific mounts allow you to install MFW adjustable footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in black or silver.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
These MFW bike-specific mounts allow you to install MFW adjustable passenger footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in black or silver.
Provide light protection for your motorcycle's levers with Barkbusters Aluminum Bar Single Point Bar End Mount Handguard Kit for motorcycles with 6mm & 8mm internally threaded bar ends. Add a set of Barkbusters JET VPS STORM or CARBON guards to provide wind and weather protection or to simply finish the look. Give your motorcycle the insurance it deserves with an aluminum bar single point bar end mount handguard kit...
The patented Type 140 PRO Tank Ring is made to suit the tank filler neck of your motorcycle model. This ensures the best possible positioning onto the tank.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
Provide lightweight and stylish weather protection for your hands with Barkbusters CARBON Single Point Bar End Mount Handguard Kit for motorcycles with 6mm & 8mm internally threaded bar ends. Coated for UV protection the hand laid genuine carbon fiber guards look as well as they perform. Give your motorcycle the high-tech look it deserves with a CARBON single point bar end mount handguard kit by Barkbusters.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Provide lightweight and cost effective protection for your hands with Barkbusters JET Single Point Bar End Mount Handguard Kit for motorcycles with 6mm & 8mm internally threaded bar ends. Impact resistant deflectors provide shelter for your hands from weather wind and light brush and are held securely in place with heat treated aluminum bars. Give your hands a break with a JET single point bar end mount handguard kit...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Provide lightweight and cost effective protection for your hands with Barkbusters VPS Single Point Bar End Mount Handguard Kit for motorcycles with 6mm & 8mm Internal threaded bar ends. High impact resistant deflectors provide shelter for your hands from weather wind and light brush and are held securely in place with heat treated aluminum bars. Protect your hands with a VPS single point bar end mount handguard kit b...
Give your hands and levers a break with Barkbusters Storm S7 wind and weather protection handguards for 6mm or 8mm internal threaded handlebars. These guards are designed to provide you comfort when riding in the elements or through narrow trails where brush can scrape up your hands or whack your levers. When you mount these motorcycle handguards for wind protection on your bike you will also enjoy not be...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
D28 Dual-End Dry Bag The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips but is the ideal add on bag for a D38 or...
The DENALI D2 2.0 LED TriOptic™ LED light kit with DataDim technology & amber lenses produces a remarkable amount of light in a very compact package that is perfect for riding in low light/severe weather conditions on any type of motorcycle. With a powerful 10-watt Cree LED the DENALI D2 casts a powerful beam 525ft down the road in your choice of clear or amber for serious foul weather performance and co
...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This Daytime Running Light Kit is designed to mount a pair of DENALI DRL pods on the front fender of your bike creating maximum visibility to oncoming traffic. This kit directly replaces the original M5 or M6 fender hardware securing the DRL’s close to the fender for a sleek low-profile installation.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This Daytime Running Light Kit is designed for fitting a pair of DENALI DRL pods to the side of any M6 hardware mounting point on your motorcycle for maximum visibility to oncoming traffic. These are ideal for tucking the DRLs up inside the fairing for an integrated factory look.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This Daytime Running Light kit allows installation of a single DENALI DRL pod with a flush fitment on any flat surface of your motorcycle for maximum visibility towards oncoming traffic. A silicone gasket ensures the unit is watertight and the included hardware allows through-bolting as well as blind self-tapping for installation on plastic.
Purpose built to create the most amount of light from the smallest slimmest housing possible the DENALI B6 dual license plate LEDs are unbelievably bright and compact for an integrated fit on your license plate. Complete with a waterproof micro connector plug-n-play splitter and included posi-taps the B6 will plug-n-play directly to the DENALI CANsmart controller or connect into any vehicle brake light circuit.
...
Purpose built to create the most amount of light from the smallest slimmest housing possible the DENALI B6 is unbelievably bright and extremely compact. Complete with a waterproof micro connector plug-n-play splitter and included posi-taps the B6 will plug-n-play directly to the DENALI CANsmart controller or connect into any vehicle brake light circuit.
The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced the S4 provides more light per dollar than just about anything else on the market. The new S-Series lights were specifically engineered to reduce cost without sacrificing performance quality or durability. In fact the S4 features the same high intensity LEDs as the D-Series lights b...
The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced the S4 provides more light per dollar than just about anything else on the market. The new S-Series was specifically engineered to reduce cost without sacrificing performance quality or durability. In fact the S4 features the same high-intensity LEDs as the D-Series lights but utili...
This mounting kit is specifically designed to mount a pair of DENALI DRL or B6 Visibility Pods 90 degrees to any M6 mounting point on your vehicle. The pair of powder coated steel brackets create the ideal mount for installing DRLs down low on your motorcycles front fender or installing DRLs as backup lights on body panels and ATV cargo racks. This mount can also be used to position B6 brake light pods in the ideal...
This mounting kit is specifically designed to mount a pair of DENALI DRL or B6 Visibility Pods to the side of any M6 mounting point on your vehicle. The pair of powder coated steel brackets create the ideal mount for tucking DRLs up inside a motorcycle fairing or positioning a pair of B6 brake light pods to the side of a license plate.
This mounting kit provides a waterproof gasket and all necessary hardware for installing a DENALI DRL or B6 Visibility Pod to any flat surface. Use this mounting kit to install DRLs to body panels and hand guards or mount B6 brake light pods directly to your rear bumper or on the back of your luggage cases.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Barkbusters STORM Single Point Bar End Mount Handguard Kit for 7/8in or 1in Hollow Handlebars - STM-005 provide wind weather and debris protection for your hands. A tough aluminum backbone bolts to each side of the bar to securely support aerodynamic plastics that create a “protective pocket” for each hand. The plastic deflectors and rigid backbones transform your exposed handlebar into a friendlier cockpit that ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Impress all your friends with the classic design of this stylish 100% cotton heavyweight T-Shirt. Includes Twisted Throttle logo. You too can be trendy and twisted.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
Replace the bars for your motorcycle's Barkbusters EGO Handguards. EGO lever protection by Barkbusters provide a close fit in order to enable tighter trail riding. EGO Handguards are ideal for Enduro, Trail and mini bikes but are not suitable for motorbikes with full length levers due to the narrow clearances provided by the smaller profile.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
R&G Micro Indicator turn signals (pair). Includes 10 watt incandescent bulbs; replaces original 10 watt or 21 watt incandescent turn signals. Designed to fit the R&G line of "Tidy Tail" fender eliminators.
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch. This ...
This stylish well-constructed windscreen features improved height and shape with top-notch quality. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles using a 2-point handlebar mount and front fork mount (up to a 50mm fork tube diameter). Mount included. Shape fits a 7" diameter light bulb (8" diameter can) headlight. Features light smoke tint and precision-cut shape. <...
Adapter kit required for attaching Shad sidecases to SW-MOTECH Quick-Lock EVO carrier. Includes all hardware required to mount one pair of sidecases to your sideracks.
Add 180 grams of mass to the end of each of your handlebars to reduce vibration. Barkbuster Bar End Weights are compatible with full-wrap Storm and VPS hand guards. They will not mount to the motorcycle by themselves they work in conjunction with Barkbuster full wrap hand guards.
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW Ducati and other European motorcycles with a Can-BUS electrical system and a "City Light" 194 marker bulb in the headlight. Please Note: Only compatible with bikes that use a 194 marker bulb and have a "universal" bulb connector; will not fit bikes wi...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Developed with the feedback of racers and road riders alike R&G's latest generation of Aero Knee Sliders are constructed from a special blend of composite materials to ensure the riders get the best overall performance available. The high-density polyurethane material provides the ideal "sliding action" needed for aggressive street riders and trackday enthusiasts alike. The Aero Knee Sliders attach to your leathers w...
Buy 1 set for each Givi Monokey case you will be attaching to your bike. Includes: – 1 pyramid clamp – 2 attachment screws – 2 washers – 4 replacement rubber bumpers
High-density black rubber backrest for the Givi B33 cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
The SHOCK1BK R&G Shocktube rear shock protector safeguards the vulnerable spring and damper from water sand dirt and debris that can cause stone damage grime build up and corrosion. High quality bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon on both sides to completely block out the elements. This handy Shocktube should be the first addition to any new motorcycle to p...
The M5M Monolock Plate is a streamlined adapter with durable nylon construction. This is compatible with all Monolock top cases and GIVI FZ series top racks.
This kit allows Barkbusters VPS or Storm full-wrap backbones to be installed into the ends of handlebars with an 18mm inner diameter opening including Barkbusters VSB bars and the original Motor Guzzi Stelvio handlebars.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this exhaust protector or "Exhaust Slider" to fit most tri-oval exhaust cans. These tri oval covers have been designed to look good and protect your expensive silencer in most crash situations.
The GIVI M3 Monokey Plate features a flat design with strong nylon construction and a matte black finish. This plate works only with GIVI F series top racks and all Monokey top cases.
Bright red brakelight kit (red diodes) for the Givi V46 and V46NT topcases. Significantly increase safety and visibility by raising and brightening your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks.
LED brakelight kit for the new Givi E55 Maxia 3 topcase. Significantly increase safety and visibility by raising and increasing your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks (Wingrack Monorack and E250 mounting plates).
High-density black rubber backrest for the Givi Trekker cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.