Laser-cut from mild steel and powder coated black these light mounting brackets are both strong and attractive. The kit allows fitment of any Denali LED Lighting Kit to the Honda Interstate Stateline Sabre Shadow RS Shadow Spirit 750 Shadow Aero and Shadow Phantom. See app chart for specific model years
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Provide protection for your motorcycle from road debris and dirt with the R&G Fender Extender. Constructed from durable ABS plastic this guard is designed to block stones mud grime and water kicked up by the front tire adding protection to your engine cooling system exhaust and fairings. Easy to install this kit fits directly to your motorcycle’s front fender using push rivets and adhesive strips. Availabl...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The D66 includes one D28 and one D38 dry bag to create 66 liters of 100% waterproof storage. Modular packing has significant advantages over a single bag of the same volume. The two-bag D66 system makes packing and organizing your gear easier allows for quicker access to your gear and enables strategic separation of your gear; keeping your clean clothes separate...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D78 Modular Packing System consists of the D38 DrySpec Rigid drybag and the D20 saddlebag set. The D38 and D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged.
This DENALI Bar Clamp Light Mount Kit allows fitment of any DENALI LED Lights to the outer fork tube on motorcycles, or any tube 50mm-60mm (2"-2.375") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.
These clamps are intended for motorcycles with exposed inverted forks such as enduro, dual sport, and naked motorcycles. The clamps allow lights to be mounted in front of, or to each side of the fork tubes to ensure clearance with fairings and other accessories. The clamps are also perfectly sized to clamp to the lower legs of conventional forks, typically found on many cruiser and standard motorcycles.
Features
Adjustable Grip Range (50mm-60mm)
60mm Light Shelf length
Rotatable Mounting Shelf allows 4th axis of adjustability
Lights can be mounted to shelf or directly to clamp
Accepts M8 Bolt from Light Pod
Billet Aluminum with Black Anodized Finish
What's In the Box?
(x2) Mounting clamps
(x2) Rotatable mounting shelf’s
(x1) Hardware kit
Instruction Manual
At 113 decibels the distinct low-tone sound from the DENALI SoundBomb Mini Motorcycle Horn is twice as loud as a typical 100 decibel disc horn. Designed to be a direct Plug & Play upgrade from your factory horn requiring no additional relay or wiring harness as long as the original horn has blade-style electrical connections. When stock isn't quite enough be heard with the SoundBomb Mini.
The R&G Cruiser Style Heated Grips are designed for 1" diameter handlebars found on most Harley Davidson and metric cruisers. The digital thermostat is easy to use and offers 5 levels of heat to find the optimum temperature that will keep your hands comfortable and warm. Chrome end caps provide an elegant appearance to any cruiser while extending your riding season and enhancing riding comfort in colder weather...
Increase your ability to be seen at night with the R&G self adhesive license plate reflector. With a 4cm (1.57in) diameter you can mount this just about anywhere you want to catch the attention of a wandering mind. Keep the odds in your favor by installing a license plate reflector by R&G on your motorcycle before your next night ride.
This DENALI Fork Tube Light Mount Kit allows fitment of any DENALI LED Light Kit to conventional forks or any tube 39-49mm (1.5-1.8in) in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional fully rotatable mounting shelf to create a su...
This DENALI Engine Guard/Frame Light Mount Kit allows fitment of any DENALI LED Light Kit to engine guards frame tubes or any tube 32mm-38mm (1.25"-1.5") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional fully rotatable mounting...
Easy and inexpensive Plug-N-Play wiring kit for DENALI SoundBomb Compact Dual-Tone Air Horn (also works with the Stebel Air Horn) that does not require any cutting soldering slicing or crimping as long as the original horn has blade-style electrical connections. Clip one lead to your original horn trigger wire one lead to battery ground one lead to battery positive and plug in your horn's relay.
I...
This DENALI Motorcycle Engine Guard/Crash Bar Light Mount Kit allows fitment of any DENALI LED Lights to engine guards crash bars or any tube 21mm-29mm (0.826in-1.125in) in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional fully rotatable mounting shelf to create a super versatile and robust light mount
...
This DENALI DataDim™ Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle’s original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so an external signal can reliably control the intensity of the LED chip at the source.
The DENALI 2.0 perch switch mount kit is used to fit the DrySeal waterproof switches to your clutch or brake perch. The kit includes everything needed to mount on M5 and M6 hardware in horizontal or vertical orientation.
This premium DENALI DrySeal™ ON-OFF Waterproof Switch can handle a load up to 15 Amps and is ideal for controlling many different accessories like auxiliary lighting. The kit includes both ⅞” and 1” handlebar switch mounting bands as well as an adhesive pad for surface mounting. In addition to molded silicone gasket seals DENALI uses a unique DrySea...
This DENALI 2.0 Premium wiring harness kit features high-quality waterproof components and is designed to power two DENALI 2.0 LED Light Pods. It features low profile water tight connectors and high quality molded wire to ensure moisture is kept out of the system. The harness includes a completely sealed waterproof switch that was engineered from the ground up to withstand harsh conditions on powe...
This DENALI Y-Splitter Kit powers two sets of DENALI 2.0 LED lights from one harness! The plug-n-play adapter simply plugs into the end of the DENALI 2.0 Premium 3-pin harness allowing control of two sets of lights
The DENALI HI-LOW-OFF Switch replaces the standard ON-OFF switch. The switch enables independent dimming of the lights separate from the vehicle's OEM lighting system. This allows you to change from low intensity to full brightness on motorcycles with OEM LED headlights that don't have a clean 12V high beam trigger signal. This switch is also a great option for those who want full independent contr...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The DENALI D4 2.0 LED light pod with DataDim™ technology was engineered from the ground up to create the brightest most efficient and durable LED lights. Specifically designed for powersports applications to focus on generating the most amount of light with the least amount of power draw from your motorcycle. The D4 is fitted with True-Hybrid™ lenses providing a combination of spot and flood patterns
...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D106 Modular Packing System consists of the D38 DrySpec Rigid drybag the D28 Dual-End drybag and the D20 saddlebag set. The D38 D28 and D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Please Note: This product is no longer available for purchase.The D56 Modular Packing System consists of two D28 DrySpec dual-opening drybags. The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips but is...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The D20 saddlebag set is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. The D20 also features a rigid core construction that allows the bags to retain their shape even when empty and makes packing and unpacking super easy.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
DrySpec D38 Rigid Waterproof Motorcycle Dry Bag
The D38 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. The D38 features a rigid core that enables the bag to be mounted to any bike with or without a top rack even when the bag is completely empty. Try that with a traditional dry bag! The rigid construction and unique 4-point strap m...
This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW Ducati and other European motorcycles with a Can-BUS electrical system and a "City Light" 194 marker bulb in the headlight. Please Note: Only compatible with bikes that use a 194 marker bulb and have a "universal" bulb connector; will not fit bikes wi...
R&G exhaust protector (fits round 5.5" - 6.5" diameter ) for the Triumph Tiger 800 / Tiger 800XC. Will fit any round exhaust can in this diameter range.
After replacing your bike's original 21 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans including Akropovic oval exhausts.
The SHOCK1BK R&G Shocktube rear shock protector safeguards the vulnerable spring and damper from water sand dirt and debris that can cause stone damage grime build up and corrosion. High quality bonded CR Neoprene is waterproof vented impact absorbing and double lined with stretch nylon on both sides to completely block out the elements. This handy Shocktube should be the first addition to any new motorcycle to p...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this exhaust protector or "Exhaust Slider" to fit most tri-oval exhaust cans. These tri oval covers have been designed to look good and protect your expensive silencer in most crash situations.
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer.
R&G Micro Indicator turn signals (pair). Includes 10 watt incandescent bulbs; replaces original 10 watt or 21 watt incandescent turn signals. Designed to fit the R&G line of "Tidy Tail" fender eliminators.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Developed with the feedback of racers and road riders alike R&G's latest generation of Aero Knee Sliders are constructed from a special blend of composite materials to ensure the riders get the best overall performance available. The high-density polyurethane material provides the ideal "sliding action" needed for aggressive street riders and trackday enthusiasts alike. The Aero Knee Sliders attach to your leathers w...
The Denali Interlink Pod Adapter allows you to link up to 4 Denali D1 Pods to each other with the integrated linking channel designed into the Denali D1 housing.
R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans. These oval covers have been designed to look good and protect your expensive end can in most crash situations.
This R&G Reservoir Sock for Clutch & Brake Fluid | Black will act as a sponge if your brake or clutch fluid should overheat and overflow the reservoir keeping this ultra slippery & corrosive fluid off of your tires and away from painted surfaces. It simply fits straight over your clutch or brake reservoir keeping them and you well protected. Made from black elasticated terry cloth fabric with a white sewn R&G ...
Five pin relay for many automotive applications. Rated for 30-amps of 12-volt DC current. Offered as a replacement part for the Denali SoundBomb Compact Dual-Tone Air Horn.
This DrySpec Motorcycle Tool Tube Kit attaches directly to the outside of any flat-sided sidecases and can be used to carry our MSR 30 oz. Fuel Bottle and any other gear that can fit inside of it.
Made from heavy-duty 3mm thick 1-inch (26mm) wide strips of steel. Inner hole diameter is 5/16-inch (8mm). Center-to-center hole distance is 3 inches overall length of bracket is 4 inches. Powder-coated flat black. Sold each.
The DrySpec STASH BOX is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e. low cost concealed mounting location vehicle styling is unaffected and easy accessibility.
This sticker is retro in more ways than one. Besides being RETRO-reflective it is also reminiscent of the cold war era and it's nuclear symbol. Made of vinyl this sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. We have even spotted a few of these as "protectors" for a certain round german motor...
Your exhaust can is likely to be scraped if you drop or crash you bike. You can greatly reduce the damage to the exhaust when an R&G exhaust protector is correctly placed on the exhaust.
After replacing your bike's original 10 watt incandescent turn signals with R&G Micro Indicators incandescent turn signals (RG.RG370) OR after replacing your bike's original 10 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required....
The sew on patch worn by racers sponsored by R&G Racing is now available! Show R&G Racing support on leathers paddock jackets sweatshirts or anywhere you would like.
Made from high quality FE360 tubular steel and powder coated black the R&G Single Sided Paddoc Stand is a must have for single-sided swingarms. Rear-wheel removal and general maintenance become a breeze! The open-sided design provides proper support without the use of a centerstand or jackstands.
Made from high quality FE360 tubular steel and powder coated black the R&G Single Sided Paddock Stand is a must have for single-sided swingarms. Rear-wheel removal and general maintenance becomes a breeze! The open-sided design allows removal of the rear wheel without a center stand.
The R&G paddock stand for the front lifts the forks get the tire off of the ground to complete tire changes maintenance or to prevent flat tire spots during storage. Sturdy FE360 tubular steel construction is finished in an attractive black powder coat that also enhances durability. This premium stand uses a unique fastening system which allows disassembly to conserve space when traveling or not in use. Four large wh...
The R&G paddock stand for the rear lifts the swing arm with the use of 6mm or 8mm cotton reels or spools to get the tire off of the ground while performing maintenance or during storage. High strength FE360 tubular steel serv...
The R&G Racing Deluxe Helmet Bag is perfect for transporting or storing your helmet when it is not on your head! Constructed from a heavy-duty nylon outer fabric and lined with fleece to keep your expensive helmet cozy and protected from damage.
R&G Universal License Plate Adapter. Used to help fit some Tidy Tails originally designed for European marker plates with American & Canadian license plates.
Made in America! The PowerHub2 Power Distribution Module manufactured by DENALI allows you to safely connect up to 6 electronic devices to your motorcycle in a clean professional manner. It is CAN-Bus compatible and includes six 15-amp rated and fused outputs six ground posts and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as...
Package contains four 2amp four 3amp two 5amp two 7.5amp two 10amp and one 15 amp fuses for use in the PowerHub2 Power Distribution Module by Denali. Fuses will work in other products that use mini ATM fuses.
This isn't your typical motorcycle cover. The R&G Racing dust cover is ideal for keeping your pride and joy spotlessly clean over the winter or when put back indoors after cleaning.
Should you drop or crash your bike your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
D28 Dual-End Dry Bag The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips but is the ideal add on bag for a D38 or...
LOUD! Stylish! Rugged!
Producing an earsplitting 120 decibels of sound the SoundBomb is 4 times louder than a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing the SoundBomb will practically disappear once installed.
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of the R&G Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs they come with clear lenses and illuminate on the side for additional visibility.
The slip-lock straps were developed by DrySpec to create the strongest lowest profile mounting solution. The tri-glides on the ends of each strap are designed to slip through and lock into the one inch hardware loop on the bag. This strap set is included with the DrySpec D38 and D20. Includes two loop-end slip-lock straps and one double-end slip-lock strap (for the rear mounting point).
Constructed from black anodized billet aluminum for strength and durability the kit allows fitment of any Denali LED Lighting Kit to Ural Motorcycles. All mounting hardware and instructions are included.
Works with similar auxiliary lighting such as the PIAA Line and Hawk lights from SW-MOTECH...
The Shocktube is a high impact waterproof vented tube made from top quality bonded 100% CR Neoprene which is double lined with stretch nylon on both sides.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
