Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The MRA SpoilerScreen is a flat sport-styled windshield with a deep recess in the center and a small spoiler in the center. Available in clear smoke gray and gloss black.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Similar in shape to the original windscreen the MRA TouringScreen includes a raised extension approximately 2-3 inches (5-7 cm) taller than the original windscreen. Available in clear smoke gray and gloss black.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA VarioTouringScreen windscreens are available in clear smoke gray and gloss black. 12" (304mm) tall x 16" (406mm) middle width x 14" (355mm) top width.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
MRA VarioScreen windscreens are available in clear smoke gray and gloss black. 19.3" (490mm) tall x 17.3" (439mm) middle width x 14" (355mm) top width.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This MRA Vario Screen Type "A" motorcycle windshield has the same overall shape as the original Vario Screen but with a modified lower edge. Available in clear and smoke gray. 19.3" (490mm) tall x 17.3" (439mm) middle width x 14" (355mm) top width.
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
SW-MOTECH has raised the bars (literally) with these new (7/8 in) 20mm handlebar risers for your motorcycle with 22mm handlebars increasing comfort by providing you with a more upright riding position. This ergonomic enhancing accessory is available in either powder-coated black or bead blasted aluminum for strength and durability. No need to replace your handlebars. Simply remove the original top clamp place th...
Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
These MFW bike-specific mounts allow you to install MFW adjustable footpegs on your motorcycle. Bike-specific mounts are compatible only with MFW footpegs. Mounts are sold in pairs and are available in black or silver.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Housed in a sturdy, weatherproof, black polycarbonate case with included black powder-coated, universal bracket for easy, quick and secure mounting just about anywhere on your bike! This Admore Light Bar comes complete with everything you need for a professional installation including unique wire tap connectors and installation instructions.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Correct your position and ride in comfort with the Rox Block Offset Risers for 22mm or 28mm handlebars on select BMW Honda KTM & Kawasaki motorcycles. These ergonomically friendly risers can be oriented in either direction allowing you to move your handlebars up and either forward or back approximately 1.25 inches relieving the pressure that can build up on your wrists forearms and neck. These han...
The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in.
The R&G Waterproof Motorcycle Cover for Supersport and Naked Bikes fits most of these motorcycles without hard side cases or top cases. Grab the best waterproof outdoor protection with anti-theft features and paint protection built in. The silver version reflects sunlight to reduce summertime temperatures plus it makes your bike look like a space man.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
D28 Dual-End Dry Bag The D28 is constructed of RF welded 22oz. vinyl that guarantees 100% waterproof performance even when submerged. Unlike other dry bags the D28 features a dual-end roll design that allows access to belongings from either end of the bag without having to disconnect the mounting straps. The D28 is perfect by itself for short trips but is the ideal add on bag for a D38 or...
The DENALI D2 2.0 LED TriOptic™ LED light kit with DataDim technology & amber lenses produces a remarkable amount of light in a very compact package that is perfect for riding in low light/severe weather conditions on any type of motorcycle. With a powerful 10-watt Cree LED the DENALI D2 casts a powerful beam 525ft down the road in your choice of clear or amber for serious foul weather performance and co
...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This Daytime Running Light Kit is designed for fitting a pair of DENALI DRL pods to the side of any M6 hardware mounting point on your motorcycle for maximum visibility to oncoming traffic. These are ideal for tucking the DRLs up inside the fairing for an integrated factory look.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This Daytime Running Light kit allows installation of a single DENALI DRL pod with a flush fitment on any flat surface of your motorcycle for maximum visibility towards oncoming traffic. A silicone gasket ensures the unit is watertight and the included hardware allows through-bolting as well as blind self-tapping for installation on plastic.
Purpose built to create the most amount of light from the smallest slimmest housing possible the DENALI B6 dual license plate LEDs are unbelievably bright and compact for an integrated fit on your license plate. Complete with a waterproof micro connector plug-n-play splitter and included posi-taps the B6 will plug-n-play directly to the DENALI CANsmart controller or connect into any vehicle brake light circuit.
...
Purpose built to create the most amount of light from the smallest slimmest housing possible the DENALI B6 is unbelievably bright and extremely compact. Complete with a waterproof micro connector plug-n-play splitter and included posi-taps the B6 will plug-n-play directly to the DENALI CANsmart controller or connect into any vehicle brake light circuit.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
This Daytime Running Light Kit is designed to mount a pair of DENALI DRL pods on the front fender of your bike creating maximum visibility to oncoming traffic. This kit directly replaces the original M5 or M6 fender hardware securing the DRL’s close to the fender for a sleek low-profile installation.
The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced the S4 provides more light per dollar than just about anything else on the market. The new S-Series lights were specifically engineered to reduce cost without sacrificing performance quality or durability. In fact the S4 features the same high intensity LEDs as the D-Series lights b...
The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced the S4 provides more light per dollar than just about anything else on the market. The new S-Series was specifically engineered to reduce cost without sacrificing performance quality or durability. In fact the S4 features the same high-intensity LEDs as the D-Series lights but utili...
This mounting kit is specifically designed to mount a pair of DENALI DRL or B6 Visibility Pods 90 degrees to any M6 mounting point on your vehicle. The pair of powder coated steel brackets create the ideal mount for installing DRLs down low on your motorcycles front fender or installing DRLs as backup lights on body panels and ATV cargo racks. This mount can also be used to position B6 brake light pods in the ideal...
This mounting kit is specifically designed to mount a pair of DENALI DRL or B6 Visibility Pods to the side of any M6 mounting point on your vehicle. The pair of powder coated steel brackets create the ideal mount for tucking DRLs up inside a motorcycle fairing or positioning a pair of B6 brake light pods to the side of a license plate.
This mounting kit provides a waterproof gasket and all necessary hardware for installing a DENALI DRL or B6 Visibility Pod to any flat surface. Use this mounting kit to install DRLs to body panels and hand guards or mount B6 brake light pods directly to your rear bumper or on the back of your luggage cases.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards. For use with VPS or Storm style handguard models. Available in all standard Barkbusters handguard colors.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Barkbusters VPS handguards feature an aluminum back bone with a stylish replaceable plastic guard and variable-height wind deflectors to yield a truly functional handguard. Available in black blue green orange red silver white and yellow.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
The Barkbusters STORM Single Point Bar End Mount Handguard Kit for 7/8in or 1in Hollow Handlebars - STM-005 provide wind weather and debris protection for your hands. A tough aluminum backbone bolts to each side of the bar to securely support aerodynamic plastics that create a “protective pocket” for each hand. The plastic deflectors and rigid backbones transform your exposed handlebar into a friendlier cockpit that ...
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Impress all your friends with the classic design of this stylish 100% cotton heavyweight T-Shirt. Includes Twisted Throttle logo. You too can be trendy and twisted.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Protect your hands and levers during your next race with Barkbusters VPS Motocross handguards. Open ended for competition motocross motorcycles with high impact VPS guards and heat treated aluminum mounting frames these MX guards will protect your hands and levers from roosted rocks and debris. Ride harder with Barkbusters VPS Motocross handguards.
The M5M Monolock Plate is a streamlined adapter with durable nylon construction. This is compatible with all Monolock top cases and GIVI FZ series top racks.
This kit allows Barkbusters VPS or Storm full-wrap backbones to be installed into the ends of handlebars with an 18mm inner diameter opening including Barkbusters VSB bars and the original Motor Guzzi Stelvio handlebars.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
Should you drop or crash your bike your exhaust is likely to be scraped even if you have been wise enough to have fitted our other protectors. R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans including Akropovic oval exhausts.
Adapter kit required for attaching plastic Hepco & Becker sidecases (Journey Junior Gobi Strayker) to SW-MOTECH Quick-Lock sideracks. Includes all hardware required to mount one pair of sidecases to your sideracks.
GIVI's Universal E-series adapter plate is designed to add a GIVI Monokey topcase to most existing flat rear luggage racks. The honeycomb matrix permits multiple options for matching the hardware through-bolts to gaps in your bike's stock luggage rack.
This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods including relay and lighted on/off switch for handlebar mounting.
LED brakelight kit for the new Givi E55 Maxia 3 topcase. Significantly increase safety and visibility by raising and increasing your bike's brakelight capability. Includes hands-free connector kit which works with all newer (post -'00) Givi-manufactured topracks (Wingrack Monorack and E250 mounting plates).
High-density black rubber backrest for the Givi Trekker cases. Perfect for increasing passenger comfort while riding. Contoured to relieve aches and fatigue.
If you're fabricating your own Givi Monokey siderack and need the specialized Givi Monokey mounting hardware pieces this is what you need. Includes 1 pyramid clamp 2 mushroom spacers rubber bumpers and standard attachment hardware.
Givi's first PLX-style sidecase! For use only with Givi PLX sidecarriers or SW-MOTECH Contour sidecarriers; not for use with Givi Monokey standard SW-MOTECH sidecarriers or Five-Stars sidecarriers. Clear lens.
The GIVI M3 Monokey Plate features a flat design with strong nylon construction and a matte black finish. This plate works only with GIVI F series top racks and all Monokey top cases.
The Givi M5 Monokey Plate features a streamlined design with rugged nylon construction a black matte finish and is compatible with FZ or SR series GIVI top racks and all Monokey top cases.
The new GIVI Trekker 33 liter top or side case is designed to offer the functionality durability and style associated with GIVI cases and meet the more rugged and demanding needs of the dual purpose market. The new Trekker series incorporates Givis' standard full lid opening (clam shell opening) as well as an optional top lid opening for convenient top loading. This is selected by way of a toggle latch.
This R&G Reservoir Sock for Clutch & Brake Fluid | Black will act as a sponge if your brake or clutch fluid should overheat and overflow the reservoir keeping this ultra slippery & corrosive fluid off of your tires and away from painted surfaces. It simply fits straight over your clutch or brake reservoir keeping them and you well protected. Made from black elasticated terry cloth fabric with a white sewn R&G ...
Includes 1 pair of interchangeable replacement lid panels for the Givi V35 PLX sidecase. Same as original matte black color panel from V35N; does not include complete replacement lid.
Universal Fit Choose Options
This product has multiple variants. The options may be chosen on the product page
-
Information
You have the best gear that the Twisted Team has scoured from every corner of the globe. Take the next logical step and customize your bike further with this collection of light-safe weather-proof vinyl decals.
The GIVI 240A windscreen for naked motorcycles is a stylish well-constructed windshield which improves aerodynamics comfort and protection. Mounts in minutes on most unfaired (a.k.a. "naked") motorcycles with round headlamps. Features light smoke tint that helps to reduce glare on the gauges in direct sunlight. Enhance every mile with the 240A windscreen from GIVI!
This GIVI 3-Case Lock Set with 6 Matched Keys includes three lock cylinders to match the keys for three GIVI cases - for example two side cases and a top case.
Includes two 1/2" (12.7mm) tall M5 spacers and two M5x30mm lenshead screws. Used to level out the tank bag on certain Quick-Lock tank bags when used on particular bikes.
R&G exhaust protector (fits round 5.5" - 6.5" diameter ) for the Triumph Tiger 800 / Tiger 800XC. Will fit any round exhaust can in this diameter range.
The RAM "Magnetic Power Plate III" is designed to hold various devices including radar detectors and cellphones. The magnetic plate includes two powerful rare earth magnets rubber cradle and two adhesive metal plates. To mount your device to the magnet you will need to attach one of the metal plates to the back of your device. Includes a rectangular 50mm x 38mm x 0.08mm thick metal plate with adhesive back. This kit...
R&G has created this Exhaust protector or "Exhaust Slider" to fit most oval exhaust cans. These oval covers have been designed to look good and protect your expensive end can in most crash situations.
After replacing your bike's original 21 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG.RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required.
Add 180 grams of mass to the end of each of your handlebars to reduce vibration. Barkbuster Bar End Weights are compatible with full-wrap Storm and VPS hand guards. They will not mount to the motorcycle by themselves they work in conjunction with Barkbuster full wrap hand guards.
Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight. Requires Barkbuster Hand Guards specificy bike prior to ordering this product.
This reflective vinyl bumper sticker shines like the sun when targeted with a night-time headlight beam. Great for increasing rider visibility when used on a motorcycle helmet bumper or hard luggage. Of course our graphic designer says people should just stick it on because it looks cool. Warns others of your true intentions.
R&G Micro Indicator turn signals (pair). Includes 10 watt incandescent bulbs; replaces original 10 watt or 21 watt incandescent turn signals. Designed to fit the R&G line of "Tidy Tail" fender eliminators.
Want to mount your Tool Tube or Bottle Mount to your SW-MOTECH siderack? These brackets which can mount in an infinite number of positions are the answer.
Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
